Entryway and Staircase Lighting
Statement fixtures for foyers, double-height entries and staircases.
This small ceiling light pairs a body of natural travertine, carved from a single block, with a canopy of solid walnut turned in a dark tone. The stone carries its own pitting and earthy veining, so each fixture looks a little different from the next. When the lamp is on, the hollow inside the travertine glows and the surface texture comes forward, while light falls in a soft pool below.Travertine responds closely to the color of its light. Under 2700K warm white it reads rich and earthy, and cooler light tends to make it look gray and flat, so a warm lamp is intended here. At just 12 cm across and 10 cm deep, the fixture works well on low ceilings and in repetition: a row along a corridor spaced about 1.5 to 2 m apart, a single one in a powder room, or two above a bar or niche. It is best treated as an accent light, with other ambient sources in larger rooms.Details Materials: natural travertine body carved from one block; solid walnut canopy in a dark tone Dimensions: 12 cm (4.7 in) diameter, 10 cm (3.9 in) high Profile: sits within 10 cm (3.9 in) of the ceiling Light source: one E27 lamp Recommended lamp: 3 to 5 W warm white LED, 2700K Light output: soft downward pool with a glowing stone body Mounting: walnut canopy fixes directly to the ceiling; hardwired Weight: approximately 1.5 to 2.5 kg (3.3 to 5.5 lb) Custom options: wood species and stone finish can be changed on volume orders CareTurn the fixture off and allow the lamp to cool before cleaning. Wipe the stone and walnut with a soft, dry cloth. Keep water and acidic or abrasive cleaners away from the travertine, since they can etch its surface.
A column of clear glass narrows as it rises from a broad brass base, standing 160 cm (63 in) tall. Inside, four bulbs are spaced along the column, so the glow travels up the full height of the glass instead of collecting at the top.The taper is shaped by hand, which means the glass wall is thicker in some places and thinner in others. Light catches those variations unevenly, giving the column a sense of depth when lit. Its slim vertical profile reads well from across a room, beside a sofa, in an entry or in a hotel suite.Details Materials: Hand-shaped clear glass column on a brass base Dimensions: 160 cm (63 in) H x 27 cm (11 in) W x 35 cm (14 in) D Base: 36 x 27 cm Weight: 26 kg (57 lb) Light source: Four E27 sockets (E26 for North America), 9W maximum per bulb Recommended bulbs: Globe-shaped, warm white 2700K; bulbs not included Assembly: Required on arrival; given the weight, place the lamp before final styling Use: Dry indoor locations only
A sculpted plaster form that sits close to the wall and lets light escape only from its open ends. The body itself stays matte and softly shadowed, so the fixture reads less like an added object and more like part of the architecture.Each sconce is finished by hand, which means tone and texture shift slightly from one piece to the next. The surface absorbs light the way a painted wall does instead of reflecting it, making it a natural fit for rooms finished in plaster, limewash or lime render. It works well along a hallway or stair wall, and equally well in a living room or bedroom.Details Material: Hand-finished plaster with a matte surface Dimensions: 47 cm (18.5") long, 23 cm (9.1") wide, 22 cm (8.7") high Light: Warm white, 2700K, directed from the open ends Installation: Hardwired wall mount Use: Indoor
This table lamp takes the shape of a softly draped mushroom cap, its surface dotted with small glass spheres applied by hand. It rests on a rounded glass base, and when lit the entire body glows, so it reads as both a working light and a sculptural object.Because the glass is blown and worked by hand, the fall of the drape, the arrangement of the spheres and the intensity of the color vary slightly from lamp to lamp. It shows best on a console, sideboard or bar, where a plain surface lets the color come forward.Details Material: Hand-blown glass with applied glass spheres, on a rounded glass base Dimensions: 40 cm (15.7") wide x 41 cm (16.1") high Light: Warm white, 2700K Finish note: Each piece is handmade, so form and color depth will vary slightly
A softly glowing dome of natural alabaster sits atop a ribbed stainless-steel column, pairing the warmth of stone with a crisp, architectural base. Switched on, the shade reveals the clouding and veining unique to its stone, casting a gentle ambient light across the room.At just under five feet tall with a compact footprint, it settles easily into a living room corner, beside a bed or in an entry where the lit dome can be appreciated. Because alabaster is a natural material, the veining, opacity and color of each shade will differ from the next.Details Dimensions: W 46 cm × H 146 cm (18.1 × 57.5 in) Materials: Natural alabaster shade, ribbed stainless-steel column Weight: Approximately 13 to 18 kg Bulbs: 2 × E26 (E27 configuration available for other regions) Color temperature: 2700K warm white by default Dimming: Standard version is not dimmable; a dimmable version can be requested Use: Dry indoor locations only Natural variation: Veining, opacity and color vary from piece to piece
This large chandelier is built around two tiers of curved, hand-poured glass panels set on a wide antique brass frame. Every panel carries milky white marbling formed while the glass was still molten, so no two swirls match. Suspended from three brass chains that meet above, the fixture has a broad, settled presence that feels nearer to a lantern than a traditional chandelier.Each panel is held in its own brass clip, so the glass catches light piece by piece instead of reading as a single shade. The brass is unlacquered and will darken gradually over the years. Because white swirled glass picks up the tone of the bulb behind it, warm white lamps around 2700K bring out a soft glow, while cooler light tends to make the glass look gray.Details Materials: Hand-poured swirled white glass panels, unlacquered antique brass frame and chains Diameter: 80 cm (31.5") Weight: 20 kg (44 lb) Bulbs: Four E27 sockets (E26 for North America), 6W maximum each; globe-shaped LED bulbs suit the open panels best Recommended light: Warm white, about 2700K Sizing guide: Suits a dining table of roughly 120 to 160 cm (47 to 63"), a stair landing or a double-height entry Installation: Requires a ceiling box and fixing rated for the weight; hang the frame first, then fit the glass panels
Raw quartz plates are stacked vertically and lit from behind, so the light travels through the stone itself. Cloudy patches and natural inclusions show up as soft variations in brightness, giving the panel an uneven, living glow that reads as material rather than fixture.Each plate is hand selected, which means translucency, inclusions and the way the layers sit together change from one sconce to the next. It works best as a focal point in a hallway, along a stair wall, in a spa or in any room where natural stone sets the tone.Details Material: Hand-selected raw quartz plates, layered vertically Dimensions: 58 cm (22.8") high x 13 cm (5.1") wide Light source: Integrated LED backlighting Color temperature: Warm white, 2700K Weight: Approximately 5 to 8 kg (11 to 18 lb) Mounting: Fix into a stud or use reinforced anchors; professional installation recommended Variation: Every panel is unique due to natural stone
A slim, tapered rod of brushed stainless steel rises from the wall and ends in a lit crystal tip. The glow begins at the crystal and runs down the length of the metal, so the sconce reads on the wall as one clean vertical line.The brushed finish catches soft shadow along the rod instead of throwing back a flat shine, and the cut crystal scatters light where it meets the steel. At 50 cm it is slender but has real presence. It works well in a hallway, at an entry, along a staircase or in a niche. Mounted as a pair on either side of a doorway, it makes the most of that vertical form.Details Materials: Brushed stainless steel with a cut crystal tip Dimensions: 50 cm H x 11 cm W x 11 cm D (19.7 x 4.3 x 4.3 in) Weight: Approximately 1.8 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount
A clear glass cylinder encloses a cast steel core, and the rough, forged surface of that core becomes the whole character of the sconce. Seen through the glass, the texture shifts as light moves across it, so no two pieces look quite alike.The glass is shaped by hand, which means slight variations in wall thickness are part of the piece. It gives soft, ambient light suited to hallways, bedrooms, dining rooms and studies, where mood matters more than task lighting.Details Materials: Cast steel core with forged texture, hand-formed clear glass cylinder Finishes: Antique copper or brushed chrome (listed as Copper and Silver). Other finishes may be specified at order Dimensions: 42 cm (16.5") high, 20 cm (7.9") wide, 12 to 14 cm (4.7 to 5.5") projection from the wall Weight: Approximately 3.2 to 4 kg (7 to 9 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount, indoor use
This flush mount is cut from a single block of Spanish alabaster, carved square and hollowed by hand until the walls are an even thickness. Because the stone is never joined, its veining wraps unbroken around all four sides and the corners have a carved, seamless finish. Each one is unique, and you can request heavier veining with strong mineral lines, a softer and milkier stone, or leave the selection to us.The lamps sit inside the hollowed block, so the whole piece glows and casts a soft ambient light. Warm 2700K light brings out honey and cream tones and draws the veining forward, while cooler light tends to make alabaster look grey. It sits close to the ceiling on a slim metal frame, which suits foyers, hallways, bedrooms, dressing rooms, powder rooms, and larger rooms where a chandelier would crowd the ceiling height. In kitchens or at a desk, pair it with task lighting.Details Material: Hand-carved Spanish alabaster, single block Frame finish: Gold (solid brass), black or silver; frame, ceiling plate and hardware carry the stone's weight Height: 12 cm (4.7 in) for all sizes 35 cm (13.8 in) square: 2 lamps, about 6 kg (13.2 lb), lights roughly 5 m² (50 sq ft); suited to closets, dressing rooms, powder rooms, bathrooms or a series along a hallway 45 cm (17.7 in) square: 3 lamps, about 10 kg (22 lb), lights roughly 9 m² (100 sq ft); suited to foyers, walk-in closets or main bathrooms with ceilings of 2.7 to 3 m (9 to 10 ft) 60 cm (23.6 in) square: 4 lamps, about 20 kg (44 lb), lights roughly 14 to 18 m² (150 to 200 sq ft); suited to great rooms, large bedrooms or open-plan spaces with ceilings of 2.4 to 2.7 m (8 to 9 ft) Light source: Warm white 2700K LED lamps recommended to keep heat in the stone low; bulbs not included Installation: Hardwired, mounts flush to the ceiling; fix to a joist or reinforced blocking, with reinforced blocking required for the 60 cm size. Have an electrician confirm the fixing. CareTurn the fixture off and allow the lamps to cool first. Dust the alabaster with a soft, dry cloth only and never apply water or cleaning products to the stone. Wipe the metal with a soft, dry cloth and skip any polish.
A broad square of natural travertine, 60 × 60 cm, that reads as much like a panel of stone as a light. The taupe, honeyed surface carries its own pattern of pores, so no two pieces look quite alike, and at this scale that natural variation becomes the main event. The stone is chosen free of holes and blemishes for a clean, even face.An integrated LED casts a warm 2700K glow with no bulb to change. It sits comfortably in a living room, bedroom, bathroom or hallway, and the waterproof option allows use outdoors in covered spots such as a porch, balcony or sheltered terrace, away from standing water.Details Material: Natural travertine, taupe tone Dimensions: 60 × 60 cm (23.6 × 23.6 in) Light source: Integrated LED, warm white 2700K, no replaceable bulb Options: Standard or waterproof version Installation: Hardwired; due to its size, secure into structural framing rather than plasterboard alone Placement: Indoors, or outdoors under cover with the waterproof option
Staggered panels of antiqued mirrored glass form a shimmering drum around the light source, held close to the ceiling by a solid brass frame in an antique finish. Each panel is antiqued by hand, so the clouding and depth of silvering vary across the fixture and from one piece to another. Because the panels are offset, reflections break into soft fragments, and the fixture keeps catching daylight long after the lamps are off.Light escapes between the panels and bounces around the room as gentle ambient glow, with a faint ripple across the ceiling. The mirror picks up the color of its light, so warm white at 2700K is recommended. At that temperature the silvering turns smoky and warm and the brass reads gold. At 20 inches across, it brings the presence of a chandelier to a bedroom, dressing room, dining room or wide hallway where the ceiling is too low for one.Details Materials: Hand-antiqued mirrored glass panels in a solid brass frame Finish: Antique brass, darker and softer than polished brass Dimensions: 20 in (50.8 cm) diameter, 12 in (30.5 cm) high Room size: Suited to rooms of roughly 10 x 10 ft to 13 x 13 ft, or a wide hallway Ceiling height: Best for ceilings of about 8 to 9 ft (2.4 to 2.7 m) Light: Lamps housed inside the mirrored drum; warm white 2700K recommended Installation: Hardwired, mounted flush to the ceiling CareSwitch off the fixture and let the lamps cool first. Dust the glass and frame with a soft dry cloth. Lift marks from the mirror with a microfiber cloth lightly dampened with water. Avoid polish on the brass.
A solid block of natural jade sits flat against the wall and glows softly from inside. Light slips out along the top and bottom edges, casting a gentle wash on the wall above and below while the stone face holds a quiet, even luminance.Because each block is cut from real stone, its color, clouding and translucency are unique, and every sconce lights a little differently. The low, wide proportion works well over a console or on a fireplace wall, where a taller fixture might compete with the furniture or mantel beneath it. A narrow version of the block is also available.Details Material: Genuine natural jade; clouding, color and translucency vary by piece Dimensions: 31 cm (12.2 in) W x 25 cm (9.8 in) H x 12 cm (4.7 in) D Weight: Approximately 5 to 7 kg Light source: Integrated LED, warm white 2700K, washing upward and downward Installation: Hardwired to a wall junction box by an electrician; a plug-in version may be requested where the design allows Mounting: Fix into wall structure or use fixings rated for the weight Use: Dry indoor locations only; not for outdoor use
A solid block of natural jade forms the body of this wall sconce. When lit, the stone takes on a soft inner glow, while light slips out along its upper and lower edges to brighten the wall above and below. The effect makes the block seem to hover just off the surface.Because each block is cut from real jade, no two are alike. Color, clouding and translucency shift from one piece to the next, so yours will have its own character and may differ from the photos. It suits hallways, bedsides, fireplace walls and hotel corridors, anywhere a quiet, low glow is wanted more than strong task light.Details Material: Genuine natural jade, with tone and translucency varying by piece Dimensions: 25 cm (9.8 in) H × 15 cm (5.9 in) W × 12 cm (4.7 in) D Projection from wall: 12 cm (4.7 in) Light source: Integrated LED module, approximately 6 to 7W Output: Approximately 550 to 600 lumens, warm white at 2700K Dimming: Not dimmable Weight: Approximately 4 kg Installation: Hardwired to a wall junction box; a licensed electrician is recommended. Choose anchors and screws suited to your wall type and the weight of the stone. Suggested height: Fixture center at roughly 60 to 66 in (152 to 168 cm) above the floor in hallways or beside a bed; it can also sit lower as an accent on a fireplace wall Use: Dry indoor locations
This large drum chandelier is built from a ring of upright antique mirrored glass fins, set at uneven heights within an aged brass frame and suspended from three chains. The fins vary in tone from smoky grey to bronze and amber, so the fixture reads differently from every angle in the room.The glass is true antique mirror, put through a genuine ageing process that leaves the clouding and foxing found in old looking glass. Because the patina is real rather than printed, each fin is unique. The mirrored panels conceal the lamps and send light both upward and downward through the open drum, while the glass catches reflections of the room. It works best as ambient lighting rather than task lighting.With a 36 in (91.4 cm) diameter and a slim 9 in (22.9 cm) depth, it sits comfortably over a round dining table of roughly 55 to 71 in (140 to 180 cm) or above a stair landing, and it suits standard 8 ft (2.4 m) ceilings.Details Materials: Antique mirrored glass fins, aged brass frame Dimensions: 36 in (91.4 cm) diameter, 9 in (22.9 cm) deep Suspension: Three chains, drop adjustable at installation Light source: Four E26 sockets (E27 outside North America), 40W maximum each Suggested bulbs: Warm white 2700K, which complements the bronze and amber tones
A slender column of faceted K9 crystal in a smoky amber shade, this sconce scatters light into fine glints across the wall. The tint adds warmth of its own, so the glow reads like honey when paired with warm white bulbs.The shorter 53 cm version sits comfortably beside a bed, in a powder room or as a pair flanking a mirror. The 90 cm version carries the eye upward along a stairwell, a long hallway or a tall entrance.Details Material: Hand-cut K9 crystal Color: Smoked amber Width: 20 cm (7.9") Heights: 53 cm (20.9") or 90 cm (35.4") Weight: About 3.5 kg (8 lb) at 53 cm, about 5.2 kg (11 lb) at 90 cm Bulb type: E14 sockets (E12 for North America) Recommended bulbs: Warm white, 2700K Installation: Hardwired Use: Indoor
A wide, shallow ring of faceted K9 crystal beads in smoked amber, packed tightly along a slender brass frame so the whole circle reads as one unbroken band of light. The tinted glass brings warmth and depth, and it pairs naturally with walnut, bronze, leather and darker painted walls.An integrated LED tucked inside the ring lights the crystal from within, spreading an even glow around the full circumference. The effect is ambient and sparkling rather than a focused downlight, so a dining table used for work or reading will benefit from additional task lighting nearby. The 2700K warm white is essential to the look: under it the amber turns a rich honey color, where cooler light would make it appear flat and brown.The smaller rings suit a compact entry or a round table roughly 90 to 160 cm (35 to 63") across. The middle sizes fit a typical foyer, living room or generous dining table, and the two largest are scaled for grand entrances and double-height rooms. Above a table, aim for the lower edge to sit 75 to 90 cm (30 to 35") over the surface. Even at full size, the ring keeps a low profile.Details Materials: smoked amber K9 crystal beads, brass frame Color: Amber 60 cm: 60 cm (23.6") diameter x 12 cm (4.7") high; 9 light sources; approx. 12 to 15 kg (26 to 33 lb) 80 cm: 80 cm (31.5") x 16 cm (6.3"); 12 light sources; approx. 18 to 24 kg (40 to 53 lb) 100 cm: 100 cm (39.4") x 18 cm (7.1"); 16 light sources; approx. 26 to 34 kg (57 to 75 lb) 120 cm: 120 cm (47.2") x 20 cm (7.9"); 18 light sources; approx. 35 to 45 kg (77 to 99 lb) 150 cm: 150 cm (59.1") x 20 cm (7.9"); 25 light sources; approx. 48 to 60 kg (106 to 132 lb) 180 cm: 180 cm (70.9") x 22 cm (8.7"); 30 light sources; approx. 62 to 78 kg (137 to 172 lb) Light source: integrated LED, 2700K warm white Suspension: adjustable fine wires, 1.5 m (4.9 ft); longer wires possible for tall ceilings Installation: hardwired; must be secured by an electrician to a joist or reinforced blocking, with structural support planned for larger sizes CareTurn the power off before cleaning. For routine upkeep, go over the crystal with a feather duster or soft dry cloth. When the beads need more attention, use a lightly dampened microfiber cloth and dry each one right away. Wipe the brass with a dry cloth only and skip any polish.
This round wall light is cut entirely from natural marble, with both the body and the shade shaped in stone. An integrated LED sits behind the surface, so when it is switched on the light passes gently through the marble and brings its veining forward.At 28 cm across, the disk gives a focused, considered light that suits artwork, architectural details, hallways, stairs and bathrooms. Because every piece comes from its own block of stone, the pattern of veining on yours will be its own.Details Size: Ø28 cm Material: natural marble body with stone shade Light source: integrated LED, no bulb to replace Color temperature: warm, neutral or cool Control: wall switch, remote, compatible with voice control Voltage: 110V or 240V, configured for your region Weight: approximately 4 kg Use: indoor only, not waterproof Note: natural veining varies from piece to piece
A slender column of alabaster hangs from a rounded brass backplate, its brass cap concealing the light source so the stone itself does the work. Light travels the full length of the tube and settles softly at its rounded tip.Because the alabaster is natural stone, the veining and translucency vary from piece to piece, and the long tube shape reveals an unusually generous stretch of that pattern. At only 8 cm deep, the sconce sits close to the wall, which makes it a good fit for narrow hallways, either side of a bathroom mirror or beside a bed where a projecting fixture would get in the way.Details Materials: Natural alabaster tube, brass backplate and cap Dimensions: 28 cm (11") high, 10 cm (3.9") wide, 8 cm (3.1") deep Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining and translucency vary with each stone
A hand-formed ceramic capsule, finished in an ivory crackle glaze, sits just in front of a dark bronze base. Light spills out from behind the ceramic body and travels across the wall, catching the fine lines of the glaze as it goes. Because the crackle develops during firing, the hairline pattern and the depth of the ivory differ from one sconce to the next.At only 8 cm deep, the fixture stays close to the wall, so it suits narrow hallways, stairways and the gaps between built-in cabinetry where a bulkier sconce would be in the way. Mounted in pairs, they give balanced light beside a bed. Set in a line, they wash a corridor in soft, warm light.Details Materials: Hand-formed ceramic with ivory crackle glaze, dark bronze base Dimensions: 45 cm (17.7") H x 12 cm (4.7") W x 8 cm (3.1") D Weight: Approximately 2.2 to 2.8 kg (5 to 6 lb) Light: Warm white, 2700K, indirect light cast from behind the body Installation: Hardwired wall mount, indoor use Note: Each glaze pattern is one of a kind
A single tall column of alabaster rises from a slender brass mount, carved thin so light passes through the stone itself. When lit, the entire column glows softly and its natural veining becomes the pattern you see on the wall.Because the stone is carved and finished by hand, each column has its own veining, color and translucency. The tall proportion shows off a long stretch of that figure. At just 8.3 cm deep, it sits close to the wall, which suits hallways, stairways and narrow passages. Mounted in a pair beside a bed or flanking a mirror, two sconces read as a set while each stone keeps its own character.Details Materials: Hand-carved natural alabaster, brass mount Dimensions: 45 cm (17.7") high, 15 cm (5.9") wide, 8.3 cm (3.3") deep Light: Warm white, 2700K, which draws out the honey tones in the stone Installation: Hardwired wall mount Note: Natural stone varies, so no two pieces are identical
A slender column of hand-cut clear crystal rises along a polished silver frame, catching light in every facet and scattering it as fine, bright points across the metal and the wall behind. The effect is crisp and luminous, with a warm cast from the recommended lamping.The shorter 53 cm height sits comfortably beside a bed, in a powder room, or as a matched pair flanking a mirror. The 90 cm version has the presence to hold a stairwell, a long hallway or a tall entrance.Details Materials: Hand-cut clear crystal on a silver frame Width: 20 cm (7.9") Heights: 53 cm (20.9") or 90 cm (35.4") Bulb type: E14 (E12 for North America) Recommended lamping: Warm white, 2700K Installation: Hardwired wall mount Also offered: The same design in smoked amber crystal
A shallow ring of closely packed K9 crystal beads sits on a slender iron frame finished in silver. Integrated LED light travels around the full circle and passes out through the crystal, so the ring reads as one unbroken band of sparkle while glare stays low. Fine wires carry the fixture, which gives it the look of hovering in the room.Crystal picks up the color of the light behind it. In warm white at 2700K the beads take on a soft champagne glow, which is how this design is meant to be seen. Cool white is offered for rooms already lit in a crisper tone. Because the profile is so slim, views across the room stay open, and the smaller sizes suit compact entries, bedrooms and round tables of roughly 110 to 150 cm (43 to 59"). The middle sizes work in typical foyers, living rooms and over dining tables of about 180 to 240 cm (71 to 94"), and the two largest are scaled for grand entries, double-height spaces and hotel rooms. Above a table, aim for 75 to 90 cm (30 to 35") between the tabletop and the underside of the ring. Over a kitchen island or work surface, plan on separate task lighting too.Details Materials: K9 crystal beads, iron frame with silver finish Ceiling rose: silver or gold Light source: integrated LED, no replaceable bulbs Light color: warm white 2700K or cool white 60 cm: 60 cm (23.6") wide, 12 cm (4.7") high, 9 light sources, about 2,000 lumens, 12 to 15 kg (26 to 33 lb) 80 cm: 80 cm (31.5") wide, 16 cm (6.3") high, 12 light sources, 18 to 24 kg (40 to 53 lb) 100 cm: 100 cm (39.4") wide, 18 cm (7.1") high, 16 light sources, 26 to 34 kg (57 to 75 lb) 120 cm: 120 cm (47.2") wide, 20 cm (7.9") high, 18 light sources, 35 to 45 kg (77 to 99 lb) 150 cm: 150 cm (59.1") wide, 20 cm (7.9") high, 25 light sources, 48 to 60 kg (106 to 132 lb) 180 cm: 180 cm (70.9") wide, 22 cm (8.7") high, 30 light sources, about 9,000 lumens, 62 to 78 kg (137 to 172 lb) Suspension: 1.5 m (4.9 ft) of fine wire, set to height during installation; longer or shorter lengths available Installation: hardwired; an electrician should secure it to a joist or reinforced blocking and check that the ceiling can support the weight of larger sizes CareTurn the power off before cleaning. Routine dusting needs only a feather duster or soft dry cloth. For a fuller clean, dampen a microfiber cloth with a small amount of mild glass cleaner and wipe the beads by hand, keeping any spray away from the fixture itself. Avoid abrasive cleaners on the silver finish.
This table lamp is wrapped from base to shade in natural brown rope, coiled continuously over an iron frame. The body tapers gently upward into a wide conical shade, giving the piece a grounded, tactile presence on a console, nightstand or side table.Because the rope is wound by hand, the spacing shifts a little from one lamp to the next. The weave is left open, so light filters through the shade itself as well as spilling from its rim, creating a soft, layered glow. A warm white 2700K light keeps the rope looking honeyed rather than gray. It suits coastal, rustic and other texture-rich rooms, and a green rope version is also available.Details Materials: Natural brown rope wrapped by hand over an iron frame Dimensions: 40.6 cm (16") wide x 53.3 cm (21") high Shade: Broad conical shape with an open weave Light: Warm white, 2700K Note: Hand wrapping means slight variation in spacing between pieces