Bedroom Lighting

Two thin panels of natural stone meet at an angle along a slim brass spine, forming a shallow fold on the wall. The light source sits behind the stone, so the glow washes back onto the surface around it while the panels themselves take on a soft, backlit warmth.The stone is onyx-veined, with beige and cream banding that varies from one lamp to the next. The pattern is most visible along the seam where the two panels join. Mounted against plaster, limewash or microcement, it gives a hallway, entry, living room or reading nook a gentle ambient light rather than a bright point of glare.Details Materials: Natural onyx-veined stone panels, brass spine Dimensions: 35 cm (13.8") high, 15 cm (5.9") wide, 10 cm (3.9") deep Light source: Integrated LED, warm white 2700K Light direction: Indirect, cast behind the stone panels toward the wall Installation: Hardwired wall mount Stone character: Veining and color vary naturally with each piece

Two hand-turned alabaster globes sit in brass rings along a slim horizontal bar, giving this sconce a wide, low profile that spreads soft, even light without glare. Because each globe is cut from natural stone, the veining and translucency differ between the pair and from one fixture to the next. With the lights off, the brass holds a warm tone against the pale alabaster.At just 6 inches tall, it fits above a vanity mirror or headboard where a taller fixture would crowd the wall. Center it on the mirror or bed rather than hanging it at typical side-sconce height. Mounted in pairs, it also works well along a hallway or on either side of a painting.Details Materials: Genuine alabaster and brass, with natural variation in veining Dimensions: 21.7 in W x 6 in H x 5.9 in D (55 x 15.2 x 15 cm) Weight: Approximately 4.4 to 5.7 lb (2 to 2.6 kg) Light source: Two G9 lamps, warm white 2700K, approximately 450 to 550 lumens Installation: Hardwired to a wall junction box; installation by a licensed electrician recommended Use: Indoor only

A carved alabaster shade sits on a brass mount, and the stone itself does the work of diffusing the light. What comes through is warm and soft, with no harsh edge where shade meets wall.Because alabaster is a natural stone, each shade carries its own veining and translucency, and the pattern shows most clearly once the lamp is on. Hung as a pair, the two stones will read slightly differently, which is much of the appeal. It sits comfortably beside a vanity mirror, along a hallway, or flanking a bed or sofa.Details Materials: Carved natural alabaster shade, brass mount Dimensions: 38 cm (15") high, 21 cm (8.3") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining and translucency vary from piece to piece

Stacked, softly rounded forms of alabaster climb upward into a slender glowing column, giving this floor lamp the calm, monumental feel of a carved stone marker. Switched on, the stone shows its inner life: clouds, veins and mineral traces warm into view, and no two lamps share the same pattern of light.At 170 cm tall and just 28 cm across, it takes up very little floor area. It fits neatly into a bedroom corner, beside a console or in an entryway where a broader lamp would crowd the room. The column rests on a black marble base.Details Dimensions: Ø28 × H170 cm (11 × 66.9 in) Materials: Natural alabaster with a black marble base Natural variation: Color, veining, translucency and mineral markings differ with each piece Weight: Approximately 55 to 65 kg Light source: Integrated LED Color temperature: 2700K warm white Dimming: Standard version is not dimmable Voltage: 110 to 240V, configured for the destination Use: Dry indoor settings only CareBecause of its considerable weight, settle the lamp in its final spot before you finish arranging the room, and avoid shifting it often.

A broad fabric diffuser printed with a botanical motif rests on a sculpted stainless steel base. Switched off, the shade reads as a clean white panel. Once lit, the pattern comes forward and the lamp becomes a glowing surface.Each diffuser is shaped by hand over its frame, so the placement of the pattern varies slightly from one lamp to the next. Its width suits a console, a sideboard or a roomy nightstand. A darker colourway is also offered.Details Color: White Diffuser: Fabric with botanical pattern, visible when lit, hand-shaped over the frame Base: Sculptural stainless steel Dimensions: 16.5" (42 cm) wide x 24.4" (62 cm) high Light: Warm white, 2700K

A broad fabric diffuser printed with a botanical pattern sits on a sculptural stainless steel base. By day the shade reads as a quiet, soft blue form. Once the lamp is switched on, the printed pattern comes forward and the shade becomes a glowing panel.Each diffuser is shaped by hand over its frame, so the pattern settles a little differently on every lamp. Its width suits a console, a sideboard or a generous bedside table, where there is room for the shade to be seen in full. Warm white light at 2700K keeps the print rich instead of flat.Details Colorway: Blue Base: Sculptural stainless steel Diffuser: Fabric with printed botanical pattern, hand-shaped over the frame Height: 62 cm (24.4 in) Width: 42 cm (16.5 in) Light: Warm white, 2700K

This pendant lantern pairs handmade Japanese washi paper with fine bamboo ribs, giving it a gently segmented silhouette that reads as both traditional and quietly modern. Lit, the paper softens the light into an even, warm glow that settles nicely over a dining table or brings calm to a living room or bedroom.Because the paper is made by hand, its texture and fiber pattern vary slightly from shade to shade, so no two lanterns look exactly alike. It sits comfortably in Japandi, wabi-sabi and minimalist rooms.Details Dimensions: Ø88 cm × H35 cm Materials: Handmade Japanese washi paper, bamboo, iron Light output: 800 lumens Color temperature: Warm 3000K or cool 6000K Voltage: 110V or 240V, configured for your region Installation: Ceiling mounted, hardwired Weight: Approximately 3 kg Finish note: Handmade paper varies naturally, making each piece unique

This floor lamp draws on the bold geometry of the 1970s, pairing a slim black metal base with a broad pleated shade. The selected model carries a shade of natural alabaster, a genuine stone whose veining is unique to each piece. Lit in the evening, it gives off a soft, warm glow.The wide shade sends light downward rather than out into the room, so it sits well beside a sofa or reading chair in a living room, bedroom or home office. Allow enough clearance around the upper section for the shade's generous diameter.Details Model: Original with marble-look alabaster lampshade Base: Black metal (iron) Shade: Pleated natural alabaster; veining varies from piece to piece Height: 165 cm (64.9 in) Shade diameter: 50 cm (19.6 in) Cable length: 150 cm Weight: Approximately 14 kg with alabaster shade Bulb: E27 socket (E26 for North America); warm white 2700K recommended; bulb not included Voltage: 110 to 240V, configured for your region Use: Dry indoor locations only Shade material and finish are specified before production