Wall Sconces

A sculpted half-bowl of solid brass sends its light straight up, laying a soft wash across the wall above while keeping the room itself free of direct glare. The result reads as a quiet glow rather than a bright point.The upward light is especially kind to textured surfaces such as plaster, limewash and stone, where it picks out every variation in the finish. Hung in pairs, it works well along a hallway or staircase, above a headboard or in a powder room. For the wash to show properly, mount it with the center roughly 63 to 71 inches (160 to 180 cm) from the floor.Details Material: Solid brass Dimensions: 13.4" W x 5.1" H x 7.3" D (34 x 13 x 18.5 cm) Weight: About 4 to 5 lb (1.8 to 2.4 kg) Light direction: Uplight Lamp base: E26 for North America, E27 elsewhere Recommended lamp: Warm white, 2700K Installation: Hardwired Use: Indoor

A thin disc of carved alabaster sits on a slender brass mount, cut fine enough that light passes through the entire face. When lit, the stone's natural veining becomes the pattern you see, so the sconce reads as much as a lit object as a light source.At 60 cm tall, it has the presence to hold a wall by itself in a living room, entry, stair landing or bedroom. Because alabaster is a natural stone, each disc carries its own color, veining and translucency, and no two will match.Details Materials: Carved natural alabaster disc, brass mount Dimensions: 60 cm (23.6") high x 30 cm (11.8") wide Light: Warm white, 2700K Installation: Hardwired wall mount; secure into a stud or use reinforced anchors Variation: Color, veining and translucency vary from disc to disc

A panel of stained glass sits within a slender aluminum frame, giving this sconce a quiet band of color on the wall. Light travels both up and down from the fixture, so the surface around it glows evenly instead of gathering in one bright spot, and the tinted glass softens the wash with a gentle hue.It suits a bedside wall, a hallway, a study or a pair flanking a mirror. For bedrooms, center it roughly 150 to 160 cm (59 to 63") above the floor.Details Body: Aluminum Shade: Stained glass Dimensions: 32.7 cm (12.9") high x 16 cm (6.3") wide Light source: Integrated LED, 2700K warm white Light direction: Up and down Voltage: 110 to 240V, configured for your region Mounting: Hardwired to the wall; a standard wall box is sufficient Weight: Approximately 1.5 to 2.5 kg (3 to 6 lb)

Two hand-carved wings of natural alabaster flank a brushed brass center plate in this oval wall sconce. The lamps sit behind the stone, so light spills around the wings, warming their edges and casting a soft halo onto the wall behind.Because each wing is cut from natural stone, the veining varies between the two wings and from one fixture to the next. The rounded, ovate profile reads as a sculptural wall object even when the light is off, which suits living rooms, bedrooms, hallways and powder rooms where it will be seen up close.Details Materials: natural carved alabaster wings, brushed brass center plate Dimensions: 25 cm (9.8") wide, 40 cm (15.7") high, 10 cm (3.9") deep Light source: G9 lamps, warm white 2700K Mounting: hardwired wall mount

This compact bronze sconce is built from sweeping curves broken by open cutouts, so the wall behind it becomes part of the design. The bulb sits hidden inside the form, and its light escapes only through the openings, giving a soft, ambient glow rather than a direct beam.The bronze is finished by hand with a textured patina that gives the surface depth and an artisanal feel. Because the patina is applied by hand, each sconce looks slightly different from the next. At this small scale it works well beside a vanity mirror or along a hallway, and it looks especially good mounted in pairs or in a run.Details Dimensions: H16 x Ø6 x D4 cm Material: Hand-finished bronze with textured patina Finish note: Hand-applied patina varies, so each piece is unique Light source: G9 bulb, warm LED recommended Dimmable: Yes, with a dimmable bulb Voltage: 110V to 240V, configured for your region Installation: Hardwired wall mount Weight: Approx. 1 to 1.5 kg Use: Indoor only

A tall panel of natural alabaster set into a slender brass frame, this sconce sits just 7 cm from the wall and keeps its light source fully concealed. When it is on, the stone itself glows, giving a soft, even wash from top to bottom without a bright spot.Because alabaster is a natural material, each panel has its own veining and translucency, so no two pieces look quite alike. The shallow profile works well in a hallway, beside a bed in place of a table lamp, or flanking a vanity mirror. Mounted in a series along a corridor, the sconces read more like part of the wall than individual fixtures.Details Materials: Natural alabaster panel, metal body Finishes: Brushed brass or matte black Dimensions: 50 cm (19.7") high, 12 cm (4.7") wide, 7 cm (2.8") projection Weight: Approximately 2.8 kg (6 lb) Light source: Integrated LED, approximately 8W and 650 lumens Color temperature: Warm white, 2700K Installation: Hardwired

This compact sconce is shaped from a solid block of natural marble, with clean geometry that keeps attention on the stone itself. Light washes upward and downward from the fixture, leaving a soft band of glow on the wall and letting the veining read clearly.Its small footprint suits a bedside wall where a reading light is needed, a run of hallway or stair lighting, or a pair set either side of a mirror or framed artwork. Choose deep green marble for a richer, moodier tone or white for a lighter, classic look. Because the stone is natural, the veining on every piece is different.Details Colors: Green or White marble Materials: Natural marble with iron Size: W14 × H32 cm (approx. W5.5 × H12.6 in) Light distribution: Up and down Light source: G4 LED bulb, warm white included; cool, natural or warm color temperature can be selected Voltage: 110V or 240V, configured for your region Installation: Hardwired wall mount Note: Natural stone veining varies from piece to piece

This wall light is a broad, irregular panel of alabaster with a soft, cloud-shaped outline, supported on brass brackets. When lit from behind, the stone glows evenly and casts a gentle halo that follows its entire edge, so it reads more as luminous stone than as a conventional fixture.The panel is cut from a single large piece of alabaster, which lets the natural veining travel uninterrupted across the surface. No two are alike, and the generous size makes the pattern visible even from the far side of a room. It suits a wall where it can stand alone, such as a stair landing, a double-height living area, a spa or a hotel lobby.Details Material: single-piece natural alabaster panel on brass brackets Dimensions: approximately 90 cm (35.4") wide by 94 cm (37") high Weight: approximately 12 to 18 kg (26 to 40 lb) Light source: concealed integrated LED panel Color temperature: warm white, 2700K Dimming: available as an option Orientation: mounting is configured for the chosen hanging direction Installation: requires a reinforced wall fixing and installation by a professional Veining: unique to each stone, varies from piece to piece

A smooth marble center sits within a curved brass shell, and when lit, the stone takes on a soft inner glow while the matte metal frames it quietly. The effect is closer to a wall sculpture that happens to give light than to a conventional sconce.Because the brass shell is shaped by hand, its curve varies slightly from one sconce to the next, and the natural marble brings its own veining to each piece. At 60 cm across, a single sconce can anchor a living room, dining room or bedroom wall. Along a long hallway, a series can be hung with the asymmetry alternating from one to the next.Details Materials: Genuine marble and brass Dimensions: 60 cm (23.6 in) wide x 45 cm (17.7 in) high x 15 cm (5.9 in) deep Weight: Approximately 6.5 to 8.5 kg Light source: Integrated LED, warm white 2700K Installation: Hardwired wall mount; secure into a stud or structural support, or use reinforced anchors Use: Dry indoor locations only Note: Natural marble and hand-formed brass mean each piece varies

This slender wall light pairs a long vertical bar of natural marble with a warm copper accent. An integrated LED casts a gentle glow both upward and downward, drawing a soft line of light along the wall. Because the stone is natural, the veining shifts from piece to piece, so no two are quite alike.The tall, narrow profile sits comfortably in a hallway or stairwell, beside a bed, or on either side of a mirror. A built-in switch offers three color temperatures, letting you choose warm, natural or cool light to suit the room.Details Sizes: H60 x W6 cm (23.6 x 2.4 in) or H80 x W6 cm (31.5 x 2.4 in) Materials: natural marble with copper accent Light source: integrated LED, included Color temperature: three-setting switch (warm, natural, cool) Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Note: marble veining varies, making each piece unique

A sphere of natural alabaster rests within a hand-forged iron ring, so the stone appears cradled by the metal rather than fixed to the wall. When lit, the alabaster glows softly and the ring casts its own outline across the surrounding surface, adding a quiet layer of shadow and depth.Because the globe is turned from real stone and the ring is shaped and textured by hand, each sconce carries its own veining and surface character. It sits comfortably beside a bed, along a hallway or stair, or in a powder room where the play of light on the wall can be appreciated up close.Details Materials: natural alabaster globe, hand-forged and hand-textured iron ring Dimensions: 23 cm (9.1") wide, 28 cm (11") high, 17 cm (6.7") deep Light: warm white, 2700K Installation: hardwired wall mount Natural variation: stone and ironwork differ slightly from piece to piece

Two pieces of natural travertine sit on a wood base in this double wall light, with light directed both upward and downward so the wall is washed in two directions while the stone catches a soft glow between the beams.Because travertine is quarried, each piece shows its own pitting, banding and color, and the wood grain below it varies as well. Use one on its own or several in a row along a living room wall, staircase, corridor or bedroom. In a hallway, space a pair evenly and set the centers roughly 63" (160 cm) above the floor.Details Materials: natural travertine with a wood base Dimensions: 19.7" (50 cm) high, 5.5" (14 cm) wide Back plate: 7.1 × 1" (18 × 2.5 cm) Light source: integrated LED, warm white 2700K, no bulb to replace Light direction: up and down Voltage: 110 to 240V, configured for the destination Weight: approximately 9 lb (4 kg)

A shade of carved alabaster hangs from a brass arm, with a column of stacked spheres stepping down from the wall plate to give the sconce its quiet architectural rhythm. Because the shade is natural stone, each one carries its own veining and translucency, and the light that passes through it reads warm and soft rather than bright white.It sits comfortably beside a bed, along a hallway, in an entry or flanking a vanity mirror. The sphere detail holds its own as a single fixture, though the design looks its best mounted in pairs.Details Materials: carved natural alabaster shade, brass arm and wall plate Height: 38.6 cm (15.2 in) Width: 15 cm (5.9 in) Depth: 16 to 18 cm (6.3 to 7.1 in) Light: warm white, 2700K Installation: hardwired wall mount Note: veining and translucency vary with each piece of stone

A carved alabaster bell hangs from a slender brass arm, and three stacked brass spheres step down from the wall plate to meet it. Those beads give the arm a sculptural, almost totemic rhythm, so the sconce holds its own even when switched off.The shade is natural stone, which means every piece has its own veining and degree of translucency. When lit, the alabaster gives off a soft, warm glow instead of a crisp white light. Mount one beside a bed or along a hallway, or set a pair on either side of a vanity mirror, where they read more like two carved objects than standard fixtures.Details Materials: Genuine alabaster shade with brass arm and spheres Dimensions: 38.6 cm (15.2 in) H × 15 cm (5.9 in) W × 16 to 18 cm (6.3 to 7.1 in) D Weight: 2.5 to 3.5 kg Bulb type: E12 base in North America, E14 base in other markets Color temperature: Warm white, 2700K Dimming: A dimmable version is available Installation: Hardwired to a wall junction box; installation by a qualified electrician is recommended Mounting: Choose anchors and fixings suited to both the fixture's weight and your wall type Bedside placement: Center the fixture roughly 140 to 152 cm (55 to 60 in) above the floor Vanity placement: Install one on each side of the mirror at about face height Use: Intended for dry interior spaces only; not for outdoor use

Faceted crystal is set around a sculpted resin body in this compact wall sconce. As the light passes through, the crystal scatters it into fine points of sparkle, while the resin gives the fixture a solid, grounded shape.At 6 inches wide and 12 inches high, it brings the glint of crystal to places where a larger fixture would overwhelm, such as beside a bed, along a hallway, on a dining room wall or in a powder room. It looks especially good mounted in pairs.Details Materials: Faceted crystal and sculpted resin Dimensions: 15.2 cm (6") W x 30.5 cm (12") H Light source: Integrated LED, warm white 2700K Weight: Approximately 1.5 to 2.5 kg (3 to 6 lb) Installation: Hardwired; mounts to a standard wall box Placement: Can be used beside a vanity in a dry, protected spot away from direct water

A carved body of natural marble supports a frosted glass globe in this compact wall sconce. The frosting diffuses the lamp fully, so the light stays gentle even when you are standing close, and the stone remains the feature that draws the eye.Because every body is cut from real stone, the veining, tone and mineral markings vary from one sconce to the next. White marble is light and quiet, beige brings a warm, sandy cast, and grey leans darker toward charcoal. The small footprint works well beside a bed, in an entry or along a hallway, and mounting one on each side of a vanity mirror casts balanced light across the face.Details Materials: natural marble body, frosted glass globe Stone options: White Marble, Beige Marble, Grey Marble Light color: warm white, 2700K Installation: hardwired, wall mounted Vanity use: suited to a dry, sheltered spot beside the mirror, kept clear of direct water Dimming: available as an option

Two softly diffused white glass discs sit on a slender brass body, spaced apart so each reads on its own while the pair stays in quiet balance. Because the glass is frosted rather than clear, the light spreads evenly and the source stays hidden, giving a gentle, steady glow.The sconce can be mounted upright or on its side. Vertically, it adds height to a narrow stretch of wall. Turned horizontal, it sits comfortably above a mirror or headboard. Choose the orientation before wiring, as the junction box position is different for each.Details Materials: Brass body with diffused white glass discs Height: 62.2 cm (24.5 in) Orientation: Vertical or horizontal mounting Light source: Integrated LED, warm white 2700K Installation: Hardwired wall mount; junction box placement depends on chosen orientation

This sconce is a single long rod of tapered brass finished with a glowing crystal tip. Light gathers at the crystal and runs along the metal in both directions, so on the wall it reads as one clean vertical stroke. The brass is worked to catch shadow down its length instead of reflecting flatly, and the crystal is cut to scatter light where it meets the rod.At 92 cm tall with a projection of only 7 cm, it adds height to a wall while staying close to it. That makes it a natural fit for hallways, stair walls, entrances and niches. In a living room or bedroom, a pair works well framing a doorway, a mirror or a headboard.Details Materials: Brass and crystal Dimensions: 92 cm H x 11 cm W x 7 cm D (36.2 x 4.3 x 2.8 in) Weight: Approximately 2 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

This compact wall light is a single sphere of natural stone, smoothed and rounded so the material itself becomes the design. Veining and tonal shifts differ from one stone to the next, so no two sconces look exactly alike.An integrated LED gives off a soft, even glow that brings out the texture of the surface. At 15 cm across, it sits quietly on a wall in a hallway, beside a bed or in a living room. It suits Japandi, wabi-sabi and contemporary interiors, where a little natural material goes a long way.Details Material: natural stone, with veining that varies from piece to piece Size: 15 cm diameter Light source: integrated 7W LED, no bulb to replace Light temperature: warm white or cool white Style options: with pull chain or without Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount

A slim, upright panel of natural onyx rests against a solid brass frame. Light comes from behind the stone, so the panel takes on a warm amber glow and its veining reads as the pattern itself.Because onyx is a natural mineral, each panel has its own color, banding and translucency. The large size shows the most stone, so the variation from one piece to the next is especially clear. The smaller version sits comfortably beside a bed, in a powder room or as a pair flanking a mirror. The taller one holds its own on a hallway, living room, dressing room or stair wall, where it can be appreciated from across the room.Details Materials: Natural veined onyx panel with solid brass Sizes: Small, 40 cm (15.7") tall; Large, 90 cm (35.4") tall Width: 15 cm (5.9") Depth: 10 cm (3.9") Weight (large): About 6 to 8 kg (13 to 18 lb) Lighting: Backlit stone; warm white 2700K recommended to bring out the amber tones Installation: Hardwired wall mount; secure the large size into a stud or with reinforced anchors

A single disc of solid oak, 20 cm (7.9") in diameter, sits a short distance off the wall with its light source hidden behind it. The glow spills outward and settles as a soft ring on the surface around the wood, so the sconce reads as a quiet object first and a light second.The grain is left open and natural. Because every disc is cut from solid oak, no two share quite the same figure or color, and the wood will deepen slightly over the years. The warm 2700K LED keeps the oak looking honeyed rather than cool. It sits well beside a bed or along a hallway or stair, and several mounted at even intervals make a calm, rhythmic line of light.Details Material: Solid oak with open, natural grain Diameter: 20 cm (7.9") Light source: Integrated LED, warm white 2700K Effect: Backlit, casting a halo onto the wall Mounting: Wall mounted, hardwired

A thin panel of natural jade sits within a frame of patinated brass, lit from behind so the stone's green clouding becomes the pattern itself. Around it, the darkened brass stays quiet and lets the jade carry the glow.Because the stone is natural, every panel differs in color, clouding and translucency. Its tall, slender proportions read well against a pale wall in a hallway, an entrance or a dining room, and it works especially well hung as a pair.Details Materials: Genuine natural jade panel, patinated brass frame Dimensions: 53 cm H x 18 cm W x 15 cm D (20.9 x 7.1 x 5.9 in) Weight: Approx. 4.8 to 6.2 kg Light source: E14 bulb, warm white 2700K Installation: Hardwired wall mount Use: Dry indoor locations

A solid cylinder of alabaster sits within a brass housing, forming a slim sconce with real visual weight. The stone is thick enough to keep its color when illuminated, so the light it gives is soft and warm, held close to the surface rather than thrown across the room.Because alabaster is a natural stone, the veining is unique to each cylinder. The narrow profile works well flanking a vanity mirror, set in pairs along a corridor, beside a bed or on an accent wall. In a bathroom, place it in a dry or protected spot away from direct water.Details Materials: Natural alabaster cylinder with brass housing Dimensions: 13 cm (5.1 in) diameter, 43 cm (16.9 in) high Light: Warm white, 2700K Installation: Hardwired wall mount Bathroom use: Dry or protected positions away from direct water

A compact block of natural marble set on a slim frame, this wall sconce casts light both upward and downward. Choose a round or square profile in white, black or deep green stone.It is designed first as a reading light. Mounted beside the bed at roughly shoulder height when you are sitting up, it lights the page and keeps the rest of the room soft. Installed in pairs, it also suits a corridor or the wall on each side of a mirror.Because every block is cut from real stone, the veining and tone change from one piece to the next. The green marble shows the widest variation.Details Material: Natural marble on a slim frame Stone colors: White, black or green Shapes: Round or square Dimensions: 2.6" W x 6.3" H x 3.3" D (6.5 x 16 x 8.5 cm) Weight: About 2 to 4 lb (1 to 1.8 kg) Light direction: Up and down Bulb: G4, warm white 2700K, included Voltage: 110 to 240V Installation: Hardwired wall mount