Wall Sconces

Two softly rounded rectangles of travertine sit one over the other, forming a slim sconce that glows only at its edges. Light escapes from the top and bottom in a warm, fanned wash, while the stone at the center stays solid and opaque.The travertine is chosen free of holes and marks, yet keeps its natural pores and gentle shifts in color, so the surface stays interesting even when the lamp is off. Every piece is different. With a depth of just 7 cm, it works well in a narrow hallway, along a staircase or beside a bed, and the upward and downward glow lends a sense of height to a plain wall.Details Material: Natural travertine, two overlapping layers Dimensions: 19.5 cm (7.7") W x 18.5 cm (7.3") H x 7 cm (2.8") D Light: Warm white, 2700K, directed up and down Mounting: Wall mount, hardwired

A slim column of solid travertine, turned into a cylinder and set on a wood backplate, this sconce washes light both upward and downward along the wall. Where the beam meets the edges of the stone, its natural open pores pick up the glow and give the surface a soft, textured presence.The stone is chosen free of holes and surface blemishes, yet tone and veining still vary from one piece to the next, so each sconce lights a little differently. The narrow form sits comfortably in a hallway, along a staircase, beside a bed or in a powder room. Several mounted at even intervals tend to look more considered than one alone. For most rooms, place the center roughly 59 to 63" (150 to 160 cm) above the floor.Details Material: Solid travertine cylinder on a wood backplate Dimensions: 12.6" (32 cm) high, 2.8" (7 cm) diameter Weight: Approximately 4 to 7 lb (2 to 3 kg) Light source: Integrated LED, warm white 2700K, no bulb to replace Light direction: Up and down Voltage: 110 to 240V, configured for the destination Installation: Hardwired Natural variation: Tone and veining differ on every piece

A slab of natural travertine rests against a wooden backplate, with a warm LED tucked behind the stone. When the light is on, it glows through the travertine's open pores and catches the grain of the wood beside it, so the stone itself does the work of a shade.Because travertine is a quarried stone, every slab carries its own color, pitting and veining, and no two lights look exactly alike. The 55 cm length sits comfortably in a corridor, bedroom or stairwell. The 90 cm length reads as a long horizontal line in a living room or extended hallway.Details Materials: natural travertine with a wood back Lengths: 55 cm (21.7 in) or 90 cm (35.4 in) Light source: integrated 8W LED, warm white 2700K, no bulb to replace Voltage: 110 to 240V, configured for the destination Weight: approximately 4 kg (9 lb)

This compact wall sconce builds a short vertical composition from three distinct elements: a metal arm, a polished sphere of red marble and a carved alabaster cup. At just over 13 inches tall, it suits walls where a larger fixture would feel crowded, such as a narrow pier between windows, a small powder room or the space beside a bed.Mounted in pairs on either side of a vanity mirror, the alabaster softens the light and casts it toward the face instead of straight down onto the counter. Because the marble and alabaster are natural stone, the color and veining of each piece are its own.Details Materials: polished red marble sphere, carved alabaster cup, metal arm Finish options: brass or black Dimensions: 34 cm (13.4 in) H x 14 cm (5.5 in) W x 11 cm (4.3 in) D Light color: warm white, 2700K Mounting: wall mounted Natural stone, so color and veining vary from piece to piece

This sconce is built as a vertical stack. A brass arm carries two polished brown marble spheres, and above them sits a hand-carved alabaster dome. The dome sends light downward, so the glow falls on the surface below the fixture and stays out of your line of sight.Because marble and alabaster are natural stone, each sphere and dome has its own veining. No two fixtures look exactly alike. Mounted beside a bed, the light lands on the nightstand. It also works well above a console, next to a vanity, or in a dressing room where you need light on a surface.Details Materials: brass arm, polished brown marble spheres, hand-carved alabaster dome Finish options: brass or brushed black Height: 38.6 cm (15.2 in) Width: 15 cm (5.9 in) Depth: 16 to 18 cm (6.3 to 7.1 in) Light: warm white, 2700K, directed downward Installation: hardwired wall mount

A sphere of carved alabaster sits against a solid brass wall plate, a simple pairing that lets the stone do the work. When lit, the globe glows evenly all around, giving a soft, diffused light with no harsh beam.Because each globe is turned from natural stone, the veining, color and translucency vary from one piece to the next. Smaller globes have thinner walls, so they tend to appear brighter. The 10 and 12 cm sizes sit well in a hallway or powder room, or repeated along a long wall. The 15 cm suits a bedside or entry, and the 20 cm holds its own alone on a larger wall.Details Materials: natural alabaster globe, solid brass wall plate Globe diameter options: 10 cm (3.9"), 12 cm (4.7"), 15 cm (5.9"), 20 cm (7.9") Wall plate: 15 cm (5.9") Light source: integrated LED, warm white 2700K Output: approximately 300 to 550 lumens, depending on size Weight: approximately 1.8 to 3.5 kg (4 to 8 lb) Voltage: 110 to 240V Installation: hardwired wall mount

Layered plaster shells step down the wall in this sconce, concealing the light source so the glow spills softly outward and forms a halo on the surface behind it. The matte plaster is hand finished, which means each piece carries slight shifts in tone, both from one sconce to the next and between its own tiers.Choose one tier for a powder room or narrow passage, two for a bedside wall or entry, or three for a tall vertical line along a stairway or long corridor. At only 10 cm (3.9 in) deep, it sits close to the wall where clearance is tight.Details Material: Real plaster with a hand-applied matte finish Colors: Beige or light grey 1-Tier: 30 cm (11.8 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 1.8 to 2.2 kg (4 to 5 lb) 2-Tier: 45 cm (17.7 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 2.4 to 3 kg (5 to 7 lb) 3-Tier: 57 cm (22.4 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 3.5 to 4.2 kg (8 to 9 lb) Light source: Built-in, warm white 2700K Installation: Hardwired to a wall junction box by an electrician; use fixings suited to the fixture weight and wall construction Suggested placement: Center roughly 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only; not for bathrooms with direct moisture or outdoors

A slim cylinder of solid copper, opened by a single vertical cut. When lit, the slit sends a narrow band of warm light both upward and downward along the wall, so the fixture reads less as a lamp and more as a line drawn in light.The copper is left untreated to age naturally. Over time it deepens in tone and builds an uneven patina, giving the piece a quiet richness that grows with the years. The smaller size sits well beside a bed, in a powder room or repeated at close intervals down a corridor. The larger size holds its own in a hallway, an entry or along a stairwell.Details Material: Solid copper, unlacquered, develops a natural patina Width: 8 cm (3.1 in) Small: 35 cm (13.8 in) tall, approximately 850 to 1,000 lumens Large: 55 cm (21.7 in) tall, approximately 1,300 to 1,500 lumens Light source: Integrated LED, warm white 2700K Light distribution: Up and down through a vertical slit Installation: Hardwired wall mount

A square panel of solid cast copper with a deeply cratered surface, this wall light is backlit so a soft ring of light washes across the wall around its edges. The face itself stays dark and textural, letting the copper read as a sculptural object first.Because the copper is sand-cast rather than stamped, the crater pattern varies from panel to panel, and the edges keep the raw character of the mould. It works well in a hallway, along a stair wall or in a dining room. Mounted as a pair or in a row, the panels take on the look of relief sculpture.Details Material: Solid sand-cast copper Size: 30 cm (11.8 in) square Light source: Concealed, backlit Color temperature: Warm white, 2700K Installation: Hardwired wall mount

A ribbed amber glass dome sits within a frame of solid copper rods, held in place like a lantern against the wall. When lit, the ribbing breaks the glow into fine vertical shadows that spread across the surface on each side of the glass.The copper carries an antique finish, and each dome is hand-blown, so the depth of the amber and the character of the ribs differ slightly from one sconce to the next. Its tall, narrow profile reads well on a hallway or stair wall, in a dining room or beside a bar, anywhere the shadow pattern has room to show. It can be hung as a pair or repeated along a longer wall.Details Dimensions: 34 cm (13.4") high, 19 cm (7.5") wide, 11 cm (4.3") deep Frame: Solid copper rods, antique finish Shade: Hand-blown ribbed amber glass dome Recommended lamping: Warm white, 2700K, to keep the amber a soft honey tone Installation: Hardwired wall mount

A curved petal of solid copper, hammered by hand, cradles an opal glass globe in this compact wall sconce. Each strike of the hammer leaves a small facet that picks up the light, so no two pieces look quite alike, while the opal glass spreads a soft, even glow across the wall.The copper is left to age naturally, darkening and gaining depth over the years instead of staying bright. At under nine inches tall, it sits comfortably beside a bed, along a hallway, on a dining room wall or in a powder room. Hung in pairs, the sconces read as a matched set of sculptural objects.Details Materials: Hand-hammered solid copper with an opal glass globe Dimensions: 20 cm (7.9") wide, 22 cm (8.7") high, 10 cm (3.9") deep Light: Warm white, 2700K Installation: Hardwired wall mount

A thick column of textured glass wraps a solid brass core in this wall sconce. The cast surface carries real depth, scattering the light while still letting it glow through, so the eye registers the glass and metal before it notices the fixture.Because each column is cast rather than pressed, the texture, thickness and play of light differ slightly from one piece to the next. Its proportions sit well in a hallway, on a bedroom or living room wall, or flanking a doorway. It looks especially good installed in pairs at even spacing.Details Materials: Cast textured glass around a solid brass core Also available: Black textured glass on stainless steel Dimensions: 50 cm (19.7") high, 18 cm (7.1") wide Weight: About 2.5 to 3.4 kg (5.5 to 7.5 lb) Bulb type: E14 (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Suggested mounting height: Center about 150 to 160 cm (59 to 63") from the floor

A clear glass cylinder sits inside a frame of textured brass, and because the glass is fully transparent, the hammered surface of the metal stays in view. The sconce carries visual interest whether it is lit or not. The brass is hand-worked, so the texture lands a little differently on each piece, and the finish will deepen gradually over the years.At 54 cm tall, it has a strong vertical presence that suits a hallway, a stair wall or a dining room. Hung in pairs on either side of a doorway, it frames the opening nicely. A typical center height is about 60 to 66 in (152 to 168 cm) from the floor.Details Materials: Textured brass and clear glass; the hand-worked texture varies slightly from piece to piece Dimensions: 54 cm (21.26 in) H x 15 cm (5.91 in) W x 11 cm (4.33 in) D Wall projection: 11 cm (4.33 in) Weight: Approximately 1.8 to 2.6 kg Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by a qualified electrician Use: Dry indoor locations only; not for outdoor use

This slim wall light is faced in natural taupe travertine, a warm, softly textured stone that pairs beautifully with an integrated LED washing light both upward and downward along the wall. The result is a calm, even glow that suits a quiet, minimal interior as easily as a more traditional one.Because it is built to resist water, the stone sconce can be used beside a bathroom mirror, near a kitchen sink, or outdoors on a patio or balcony. Travertine is a natural material, so the veining and tone vary from piece to piece and no two lights are identical.Details Material: natural travertine facing over an iron body Light source: integrated warm LED with up and down wash, included Diameter: 9 cm Height options: 40, 60, 80, 100, 120, 150 or 180 cm Water resistance: waterproof construction for indoor or outdoor use Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Natural variation: stone veining and color differ on every piece

A sculpted plaster form that sits close to the wall and lets light escape only from its open ends. The body itself stays matte and softly shadowed, so the fixture reads less like an added object and more like part of the architecture.Each sconce is finished by hand, which means tone and texture shift slightly from one piece to the next. The surface absorbs light the way a painted wall does instead of reflecting it, making it a natural fit for rooms finished in plaster, limewash or lime render. It works well along a hallway or stair wall, and equally well in a living room or bedroom.Details Material: Hand-finished plaster with a matte surface Dimensions: 47 cm (18.5") long, 23 cm (9.1") wide, 22 cm (8.7") high Light: Warm white, 2700K, directed from the open ends Installation: Hardwired wall mount Use: Indoor

Raw quartz plates are stacked vertically and lit from behind, so the light travels through the stone itself. Cloudy patches and natural inclusions show up as soft variations in brightness, giving the panel an uneven, living glow that reads as material rather than fixture.Each plate is hand selected, which means translucency, inclusions and the way the layers sit together change from one sconce to the next. It works best as a focal point in a hallway, along a stair wall, in a spa or in any room where natural stone sets the tone.Details Material: Hand-selected raw quartz plates, layered vertically Dimensions: 58 cm (22.8") high x 13 cm (5.1") wide Light source: Integrated LED backlighting Color temperature: Warm white, 2700K Weight: Approximately 5 to 8 kg (11 to 18 lb) Mounting: Fix into a stud or use reinforced anchors; professional installation recommended Variation: Every panel is unique due to natural stone

A slim, tapered rod of brushed stainless steel rises from the wall and ends in a lit crystal tip. The glow begins at the crystal and runs down the length of the metal, so the sconce reads on the wall as one clean vertical line.The brushed finish catches soft shadow along the rod instead of throwing back a flat shine, and the cut crystal scatters light where it meets the steel. At 50 cm it is slender but has real presence. It works well in a hallway, at an entry, along a staircase or in a niche. Mounted as a pair on either side of a doorway, it makes the most of that vertical form.Details Materials: Brushed stainless steel with a cut crystal tip Dimensions: 50 cm H x 11 cm W x 11 cm D (19.7 x 4.3 x 4.3 in) Weight: Approximately 1.8 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

A clear glass cylinder encloses a cast steel core, and the rough, forged surface of that core becomes the whole character of the sconce. Seen through the glass, the texture shifts as light moves across it, so no two pieces look quite alike.The glass is shaped by hand, which means slight variations in wall thickness are part of the piece. It gives soft, ambient light suited to hallways, bedrooms, dining rooms and studies, where mood matters more than task lighting.Details Materials: Cast steel core with forged texture, hand-formed clear glass cylinder Finishes: Antique copper or brushed chrome (listed as Copper and Silver). Other finishes may be specified at order Dimensions: 42 cm (16.5") high, 20 cm (7.9") wide, 12 to 14 cm (4.7 to 5.5") projection from the wall Weight: Approximately 3.2 to 4 kg (7 to 9 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount, indoor use

A broad square of natural travertine, 60 × 60 cm, that reads as much like a panel of stone as a light. The taupe, honeyed surface carries its own pattern of pores, so no two pieces look quite alike, and at this scale that natural variation becomes the main event. The stone is chosen free of holes and blemishes for a clean, even face.An integrated LED casts a warm 2700K glow with no bulb to change. It sits comfortably in a living room, bedroom, bathroom or hallway, and the waterproof option allows use outdoors in covered spots such as a porch, balcony or sheltered terrace, away from standing water.Details Material: Natural travertine, taupe tone Dimensions: 60 × 60 cm (23.6 × 23.6 in) Light source: Integrated LED, warm white 2700K, no replaceable bulb Options: Standard or waterproof version Installation: Hardwired; due to its size, secure into structural framing rather than plasterboard alone Placement: Indoors, or outdoors under cover with the waterproof option

A solid block of natural jade sits flat against the wall and glows softly from inside. Light slips out along the top and bottom edges, casting a gentle wash on the wall above and below while the stone face holds a quiet, even luminance.Because each block is cut from real stone, its color, clouding and translucency are unique, and every sconce lights a little differently. The low, wide proportion works well over a console or on a fireplace wall, where a taller fixture might compete with the furniture or mantel beneath it. A narrow version of the block is also available.Details Material: Genuine natural jade; clouding, color and translucency vary by piece Dimensions: 31 cm (12.2 in) W x 25 cm (9.8 in) H x 12 cm (4.7 in) D Weight: Approximately 5 to 7 kg Light source: Integrated LED, warm white 2700K, washing upward and downward Installation: Hardwired to a wall junction box by an electrician; a plug-in version may be requested where the design allows Mounting: Fix into wall structure or use fixings rated for the weight Use: Dry indoor locations only; not for outdoor use

A solid block of natural jade forms the body of this wall sconce. When lit, the stone takes on a soft inner glow, while light slips out along its upper and lower edges to brighten the wall above and below. The effect makes the block seem to hover just off the surface.Because each block is cut from real jade, no two are alike. Color, clouding and translucency shift from one piece to the next, so yours will have its own character and may differ from the photos. It suits hallways, bedsides, fireplace walls and hotel corridors, anywhere a quiet, low glow is wanted more than strong task light.Details Material: Genuine natural jade, with tone and translucency varying by piece Dimensions: 25 cm (9.8 in) H × 15 cm (5.9 in) W × 12 cm (4.7 in) D Projection from wall: 12 cm (4.7 in) Light source: Integrated LED module, approximately 6 to 7W Output: Approximately 550 to 600 lumens, warm white at 2700K Dimming: Not dimmable Weight: Approximately 4 kg Installation: Hardwired to a wall junction box; a licensed electrician is recommended. Choose anchors and screws suited to your wall type and the weight of the stone. Suggested height: Fixture center at roughly 60 to 66 in (152 to 168 cm) above the floor in hallways or beside a bed; it can also sit lower as an accent on a fireplace wall Use: Dry indoor locations

A slender column of faceted K9 crystal in a smoky amber shade, this sconce scatters light into fine glints across the wall. The tint adds warmth of its own, so the glow reads like honey when paired with warm white bulbs.The shorter 53 cm version sits comfortably beside a bed, in a powder room or as a pair flanking a mirror. The 90 cm version carries the eye upward along a stairwell, a long hallway or a tall entrance.Details Material: Hand-cut K9 crystal Color: Smoked amber Width: 20 cm (7.9") Heights: 53 cm (20.9") or 90 cm (35.4") Weight: About 3.5 kg (8 lb) at 53 cm, about 5.2 kg (11 lb) at 90 cm Bulb type: E14 sockets (E12 for North America) Recommended bulbs: Warm white, 2700K Installation: Hardwired Use: Indoor

This round wall light is cut entirely from natural marble, with both the body and the shade shaped in stone. An integrated LED sits behind the surface, so when it is switched on the light passes gently through the marble and brings its veining forward.At 28 cm across, the disk gives a focused, considered light that suits artwork, architectural details, hallways, stairs and bathrooms. Because every piece comes from its own block of stone, the pattern of veining on yours will be its own.Details Size: Ø28 cm Material: natural marble body with stone shade Light source: integrated LED, no bulb to replace Color temperature: warm, neutral or cool Control: wall switch, remote, compatible with voice control Voltage: 110V or 240V, configured for your region Weight: approximately 4 kg Use: indoor only, not waterproof Note: natural veining varies from piece to piece

A slender column of alabaster hangs from a rounded brass backplate, its brass cap concealing the light source so the stone itself does the work. Light travels the full length of the tube and settles softly at its rounded tip.Because the alabaster is natural stone, the veining and translucency vary from piece to piece, and the long tube shape reveals an unusually generous stretch of that pattern. At only 8 cm deep, the sconce sits close to the wall, which makes it a good fit for narrow hallways, either side of a bathroom mirror or beside a bed where a projecting fixture would get in the way.Details Materials: Natural alabaster tube, brass backplate and cap Dimensions: 28 cm (11") high, 10 cm (3.9") wide, 8 cm (3.1") deep Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining and translucency vary with each stone