Wall Sconces

A round disc of hand-woven rattan stretched over an iron frame, this wall light casts a soft, patterned shadow across the surrounding wall when lit. Because each shade is woven by hand, the tone, tightness and texture of the weave differ slightly from one piece to the next, and the natural fiber mellows to a lighter shade over time.The smallest size sits comfortably beside a bed or along a corridor. The middle size suits a bedroom or living room wall, and the largest holds its own on a broad wall, a stairwell or in a dining room, where it reads clearly as a woven disc from across the space. A warm white bulb around 2700K keeps the rattan looking honeyed rather than gray.Details Materials: Hand-woven rattan shade on an iron frame Sizes: 40 cm (15.7") diameter, 60 cm (23.6") diameter, 80 cm (31.5") diameter Weight: Approximately 2 to 4 kg (4 to 9 lb), depending on size Bulb type: E27 socket (E26 for North America) Recommended color temperature: Warm white, 2700K Use: Indoor only

A single square of natural green marble, backlit by an acrylic diffuser, makes up this wall light. Switched off, the stone reads deep and solid. Switched on, light comes through the veining and the green takes on a glowing, translucent quality.Because each block is cut from natural stone, no two are alike in veining or depth of color. At 60 cm square it holds its own as a focal point on a living room or bedroom wall, in an entrance, or in a hospitality interior where it can be seen from across the room.Details Material: Natural green marble with acrylic diffuser Dimensions: 60 × 60 cm (23.6 × 23.6 in) Light source: Integrated LED, no bulb to replace Color temperature: Warm white, 2700K Versions: Standard or waterproof for bathroom use Installation: Hardwired wall mount. Secure into structure, not plasterboard alone.

A solid rectangle of natural green marble mounted over an acrylic diffuser, this wall light behaves more like a glowing panel of stone than a conventional sconce. When it is switched on, light passes through the thinner veins and the marble takes on a soft, translucent depth.Because every block is cut from natural stone, the veining, color depth and translucency will vary from piece to piece. The smaller size sits comfortably in a bedroom, bathroom or hallway, while the larger one holds its own on a living room or entry wall and in hospitality settings where it is seen from a distance.Details Material: Natural green marble with acrylic diffuser Sizes: H 65 cm x W 31 cm (25.6 x 12.2 in) or H 80 cm x W 40 cm (31.5 x 15.7 in) Light source: Integrated LED, no bulb to replace Color temperature: Warm white, 2700K Weight: About 6 kg (13 lb) for the 65 cm size, about 9 kg (20 lb) for the 80 cm size Installation: Mount into a wall stud or use reinforced anchors to support the weight

A solid rectangle of natural green marble sits against the wall, backed by an acrylic diffuser. With the light off it reads as a slab of polished stone. Switched on, the green deepens and glows through the veining, so the whole panel becomes a softly lit surface.Because each block is cut from natural stone, the veining, color depth and translucency differ from one piece to the next. The smaller size sits comfortably in a bedroom, corridor or beside a dining table. The larger one has the presence for a living room, entrance or stair wall where it will be seen from across the space.Details Material: Natural green marble with acrylic diffuser Sizes: H 65 cm x W 31 cm (25.6 x 12.2 in), or H 80 cm x W 40 cm (31.5 x 15.7 in) Weight: About 6 kg (13 lb) for the 65 cm size, about 9 kg (20 lb) for the 80 cm size Light source: Integrated LED, warm white 2700K, no bulb to replace Mounting: Hardwired wall mount; fix into a stud or use reinforced anchors

Three slabs of hand-cut calcite rise one above another in a solid brass frame, glowing in sequence up the wall. At nearly 80 cm tall, this sconce brings real vertical presence, so it holds its own on a wall where a single stone would feel like a small accent.Because every slab is cut by hand, the three stones on each fixture vary in veining and tone, and no two sconces are alike. The tall profile sits well in a hallway, along a stair, in a double-height entry or on a high bedroom wall, used on its own or as a mirrored pair.Details Materials: Hand-cut calcite, solid brass frame Finish: Gold Dimensions: 79.4 cm (31.3") H x 15.2 cm (6") W x 14 cm (5.5") D Light: Warm white, 2700K Installation: Hardwired wall mount

A single brass leaf, forged by hand and gilded with gold leaf, rests against the wall as a quiet sculptural form. The gilding picks up light unevenly, so the surface shifts in tone and depth whether the sconce is switched on or not.Because the gold leaf is applied by hand one sheet at a time, every piece shows its own texture, seams and warmth of color. Expect yours to differ slightly from the photographs; that variation is part of the appeal.Choosing a SizeThe 240 mm size sits well in a hallway or powder room, or as a pair on either side of a doorway. The 310 mm works on a bedroom or living room wall. The 360 mm is scaled for dining rooms, entrances and stairwells, where it can be appreciated from across the room.Details Material: Hand-forged brass with hand-applied gold leaf Diameter options: 240 mm (9.4"), 310 mm (12.2"), 360 mm (14.2") Weight: Approximately 2.5 to 3.5 kg (5.5 to 7.7 lb), depending on size Light source: G9 bulbs, warm white 2700K Installation: Hardwired wall mount, indoor use

Two blackened iron cups, each with a hammered surface, sit on a slender brass rod set against a walnut backplate. Because the cups are shaped individually, the facets scatter light in their own way on every sconce, and the walnut grain and brass rod show natural variation from one piece to the next.A small pull chain at the fixture lets you turn it on and off without a wall switch, which suits a bedside, a reading corner, a guest room or a hallway. Mounted as a pair on either side of a bed, it gives focused reading light while the rest of the room stays dim.Details Materials: walnut, iron and brass Finish: hammered blackened iron cups, brass rod, walnut backplate Dimensions: 50.5 cm (19.9 in) H × 19.7 cm (7.8 in) W × 12 to 14 cm (4.7 to 5.5 in) D Weight: approximately 2.8 to 4.2 kg (6 to 9 lb) Light source: two E14 sockets (E12 in North America), warm white 2700K Switching: pull chain on the fixture Dimming: a dimmable version is offered; pair it with dimmable bulbs and a separate compatible dimmer Installation: hardwired to a wall junction box by a licensed electrician; choose anchors and fasteners suited to the sconce's weight and your wall type Use: indoors in dry areas only Placement tip: beside a bed, set the center roughly 140 to 152 cm (55 to 60 in) above the floor so the chain is easy to reach and the light sits under seated eye level

A curved plate of forged-texture aluminium sweeps across a central beam, giving this sconce a sculptural face that reads well even when the light is off. The texture is worked into the metal itself, so the way highlights and shadows fall across the surface varies slightly from one piece to the next.At just 7.7 cm (3 in) deep, it sits close to the wall and suits hallways, staircases and other passageways, while its 40 cm width gives it enough presence to anchor a wall without company. A concealed integrated LED washes the wall in warm 2700K light.Details Material: Forged-texture aluminium Dimensions: 40 cm (15.7 in) W x 28 cm (11 in) H x 7.7 cm (3 in) D Weight: Approx. 1.5 to 2.5 kg (3 to 6 lb) Light source: Concealed integrated LED, 2700K warm white wall wash Installation: Hardwired wall mount; professional installation recommended Use: Dry indoor locations only; not for outdoor use

A slender double sconce in solid brass with clear glass, finished in antique brass. One light points up and one points down, so the wall gets an even, balanced glow instead of a single bright spot.Its tall, narrow shape fits well beside a bed, along a hallway, in a dining room or as a pair flanking a vanity mirror. Beside a bed, set the center of the fixture roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: Solid brass with clear glass Finish: Antique brass Configuration: Two heads, one up and one down Dimensions: 42 cm (16.5") high x 15 cm (5.9") wide Weight: About 2 kg (4.4 lb) Light source: Two GU10 bulbs, warm white 2700K Voltage: 110 to 240V, configured for the destination Installation: Hardwired, for indoor use

A softly rounded shade of cream glass sits on brass hardware, its surface pressed with fine vertical ribs. Because the ribbing is molded into the glass itself, the shade has texture and depth even when the light is off. Once lit, the ribs spread the light gently, and the cream tone gives it a warm, mellow glow instead of a stark white one.At just over five inches deep, the sconce sits close to the wall, which makes it a comfortable choice for hallways and other narrow spaces. Mounted in a pair on either side of a mirror, it casts even, flattering light for a vanity, powder room or bedroom.Details Shade: Ribbed cream glass Hardware: Brass Dimensions: 9" H x 9" W x 5.13" D (22.9 x 22.9 x 13 cm) Light source: One E12 bulb (E14 outside North America) Recommended bulb: Warm white, 2700K Installation: Hardwired wall mount

Ribbed panels of natural alabaster are stacked within an iron frame, forming a compact sconce with real depth. Unlit, the fins read as carved stone. Lit, warm light slips through the gaps between them and casts a striped vertical glow across the wall.Because every fin is cut from natural stone, the veining and translucency shift along the stack and differ from one sconce to the next. The shallow footprint works well in a hallway, beside a bed, or as a pair flanking a vanity mirror, where the ribbed surface offers more texture than a flat shade.Details Materials: Natural alabaster panels, iron frame Dimensions: 25 cm (9.8") wide, 22 cm (8.7") high, 18 cm (7.1") deep Weight: Approximately 3 to 4.5 kg (7 to 10 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount

A carved alabaster egg sits against a broad brass backplate in this wall sconce. When lit, the metal throws light back across the wall behind the stone, giving the glow a layered, dimensional quality instead of a flat wash.Because the alabaster is natural stone, each egg carries its own veining, color and degree of translucency. The sconce is generously scaled and reads well on its own, on a bedroom wall, in an entry, in a dining room or next to a bathroom mirror. For comfortable placement, set the center roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: natural carved alabaster, brass backplate Height and width: 37 cm (14.6") Projection from wall: 15 to 17 cm (6 to 6.7") Weight: approximately 3 to 4.2 kg (7 to 9 lb) Light source: integrated LED, 2700K warm white Output: approximately 300 to 450 lumens Voltage: 110 to 240V Installation: hardwired, wall mounted Note: stone veining and color vary from one piece to the next

This wall light is built around a solid copper body, finished with turned wood details and a soft cloth shade. Because the copper is real rather than plated, it will deepen and darken over time, and the wood and cloth settle into their own patina alongside it. The result is a fixture that grows warmer in character the longer it hangs.A single sconce sits comfortably beside a bed, over a reading chair or along a corridor, with a choice of emerald or grey shade. The three-part version spreads light across a broader stretch of living room wall, while the five-part composition has the presence to carry a stair wall or long hallway by itself.Details Materials: Solid copper body, turned wood details, cloth shade Configurations: Single with emerald shade, single with grey shade, three-part, five-part Light: Warm white, 2700K, approximately 800 lumens Voltage: 110 to 240V, matched to the destination Weight: Approximately 3 kg (6.6 lb) Installation: Wall mounted, hardwired

Two columns of Spanish marble hang side by side from an arched brass arm, each one turned into a stack of rings. When lit, the glow slips out between the rings in soft, warm bands, giving the stone a layered, almost architectural rhythm.Because each column is ringed by hand, the veining and the depth of the rings differ from one column to the other and from piece to piece. With a pair of light sources, the sconce casts a broader spread than a single shade, which makes it well suited to a bathroom vanity, beside a bed or along a living room wall.Details Materials: Spanish marble columns on an arched brass arm Dimensions: 35 cm (13.8") high, 14 cm (5.5") wide, 9 cm (3.5") deep Light: Two columns, warm white at 2700K Installation: Hardwired wall mount Variation: Natural stone veining and hand-turned rings vary with each piece

Two hand-carved alabaster domes sit at either end of a U-shaped arm of solid brass, one facing up the wall and one facing down. The result is an even, softly balanced light that washes the surface in both directions instead of throwing a beam one way.Because each dome is cut from natural stone, the veining is unique to every piece, and the two domes on a single fixture will differ from one another. The arm can be ordered extending to the left or the right, which lets you mirror a pair on either side of a bed, a doorway or a mirror.Details Materials: Solid brass arm with natural carved alabaster domes Dimensions: 31 cm (12.2") wide by 37.8 cm (14.9") high Orientation: Left or right arm Light source: Two E14 lamps (E12 for North America), warm white 2700K recommended Installation: Hardwired; suitable for straight or sloped walls Suggested mounting: Center about 150 to 160 cm (59 to 63") from the floor when placed beside a bed Alternate finish: Also available in black stainless steel

Two crystal shades sit side by side on a solid brass frame, giving this sconce a low, wide profile that casts light outward across the wall instead of pooling it above or below. That lateral glow is especially flattering over a mirror, where it lights the face evenly.Hang it above a bathroom mirror or set a pair at eye level on either side. It also suits bedroom and hallway walls where a broad, compact fixture fits the proportions better than a tall one.Details Materials: Crystal shades, solid brass frame Width: 32 cm (12.6") Height: 19.2 cm (7.6") Weight: Approximately 2.4 to 3 kg (5 to 7 lb) Light source: Two E14 bulbs (E12 for North America) Recommended color temperature: 2700K warm white Installation: Hardwired; intended for a dry, sheltered spot, including beside a vanity

Two carved alabaster domes sit on a U-shaped arm of black stainless steel, one casting light upward along the wall and the other washing it downward. The result is a balanced, symmetrical glow rather than a single directed beam, with the dark metal framing the pale stone in a way that suits Art Deco and Hollywood Regency rooms alike.Because each dome is natural stone, its veining, color and translucency are unique, and the two shades on a single fixture will differ slightly from one another. The arm is offered in left and right versions, so two sconces can mirror each other on opposite sides of a bed, vanity or doorway. Beside a bed, a center height of roughly 150 to 160 cm (59 to 63") from the floor works well.Details Materials: Natural alabaster domes, black stainless steel arm Width: 31 cm (12.2") Height: 37.8 cm (14.9") Weight: Approximately 3.5 to 4.8 kg (8 to 11 lb) Orientation: Left or right Light source: Two E14 bulbs (E12 in North America), warm white 2700K Installation: Hardwired; can be fitted to straight or sloped walls

Two alabaster globes sit side by side on a slender brass arm, each one lit from within so the stone takes on a soft, moonlike glow and casts its own pool of light across the wall. The globes are turned from natural stone, which means the cream and honey veining shifts from one globe to the other and no two fixtures look quite alike.With a shallow projection of just under six inches, it stays comfortably clear of passing shoulders in a hallway or entry. The pair of globes offers more light and a fuller presence than a single shade, and it sits well beside a vanity mirror when mounted at face height.Details Materials: genuine alabaster globes with brass arm and backplate; veining varies naturally Dimensions: 20 cm (7.9 in) H x 15 cm (5.9 in) D Globes: two, each 10 cm (3.9 in) in diameter Backplate: 12 cm (4.7 in) Light source: two G9 bulbs, approximately 1,000 lumens total at 2700K warm white Installation: hardwired to a wall junction box by an electrician; a plug-in version may be requested where the design allows Bathroom use: suitable beside a vanity away from direct water; follow local bathroom electrical-zone rules. Not intended for outdoor use Weight: approximately 2 kg

A carved dome of natural alabaster sits within a stainless steel mount, sending a soft wash of light down the wall while the stone itself glows along its edge. The warm 2700K light brings out the veining and depth of the alabaster.Because the stone is natural, each dome has its own pattern of veins and its own degree of translucency. At 35 cm across, this sconce reads best as a single fixture on a wall. It suits a living room, a bedroom, a stair landing or an entry, and it does not need a matching partner beside it.Details Dimensions: 38.5 cm (15.2 in) H × 35 cm (13.8 in) W × 18 cm (7.1 in) D Projection from wall: 18 cm (7.1 in) Materials: Genuine alabaster with stainless steel; veining and translucency vary by piece Light source: G4 bulb, 2700K warm white Dimming: Not dimmable Weight: Approximately 3 to 4.5 kg Installation: Hardwired to a wall junction box; installation by a licensed electrician is recommended Placement: Mount with the center roughly 152 to 168 cm (60 to 66 in) above the floor, leaving open wall below for the downlight Use: Indoor use only

A single globe of natural alabaster hangs from a slim dark stainless steel stem on this wall sconce. A rectangular backplate and narrow rods give the frame a crisp, tailored outline, while the stone below brings a soft, diffused glow.Because each globe is turned from real stone, the veining is unique to every piece and becomes most visible once the light is on. The tall, narrow profile sits comfortably beside a vanity mirror, along a hallway or next to a bed, and the black finish reads clearly against lighter walls.Details Materials: Natural alabaster globe, stainless steel frame Finish: Black Dimensions: 36 cm (14.2") high x 15 cm (5.9") wide Color temperature: Warm white, 2700K Installation: Hardwired wall mount

A single block of travertine curls forward at the top like an unrolled scroll resting against the wall. Light slips out from both the curved crown and the underside, casting a soft wash upward and downward while the face of the stone stays quiet and even.The travertine is genuine quarried stone, chosen free of holes and blemishes. Its natural pores pick up the light along the curve, and every piece carries its own tone and texture. At just 9.5 cm deep, it sits close to the wall, which makes it a good fit for hallways, staircases and bedsides. Installed in a row, the paired beams set up a steady rhythm along the wall.Details Material: Genuine travertine; tone, pores and veining vary naturally Dimensions: 19 cm (7.5 in) W x 16 cm (6.3 in) H x 9.5 cm (3.74 in) D Weight: Approx. 1.8 to 2.6 kg Light source: 2 x G9 bulbs, warm white 2700K Light direction: Up and down wall wash Dimming: Dimmable with compatible G9 bulbs and an external dimmer; the fixture is too shallow for a 13 cm integrated dimmer module Use: Dry indoor locations Installation: Hardwired to a wall junction box; installation by a licensed electrician recommended Placement: Center at roughly 152 to 168 cm (60 to 66 in) from the floor, with even spacing when mounted in a run

A column of thick black textured glass wraps a stainless steel core in this tall wall sconce. Because the glass is cast, its surface scatters the light softly while still letting it through, and each column carries its own variation in texture and glow. By day the dark glass reads as a calm, sculptural form on the wall.At 50 cm tall, it sits comfortably in a hallway, beside a bed, in a living room or flanking a doorway, and it looks especially good installed as a pair. For balanced placement, mount the center roughly 150 to 160 cm (59 to 63 in) above the floor.Details Materials: Cast textured glass in black, stainless steel core Dimensions: 50 cm (19.7 in) H x 18 cm (7.1 in) W Lamping: E14 sockets (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Note: Cast glass means texture and light quality vary slightly from piece to piece

This sconce is a slim, tapered brass rod finished with a lit crystal tip. Light gathers at the crystal and travels along the metal in both directions, so on the wall it reads as a fine vertical line of glow rather than a conventional fixture.The brass surface is worked to catch shadow down its full length, while the cut crystal disperses light right where it touches the rod. It sits well in a hallway, entry, stairwell or recessed niche. Mounted as a pair on either side of a doorway, the vertical gesture becomes even stronger.Details Dimensions: 50 × 11 × 11 cm (19.7 × 4.3 × 4.3 in) Materials: Brass and crystal Light source: G9 bulb, warm white 2700K Dimming: A dimmable version uses a compatible G9 bulb with an external dimmer. The 11 cm deep body has no room for a built-in dimmer. Installation: Hardwired, wall mounted Ingress rating: IP20, intended for dry indoor areas Weight: Approx. 1.8 to 2.5 kg Other versions: Also offered at 92 cm tall and in stainless steel

A hand-formed crystal glass shade sits on a slim brass arm in this compact wall sconce. Because the glass is shaped by hand, no two shades share quite the same outline or thickness, and the light passing through carries the gentle irregularity that only handmade glass gives. Its organic form throws light outward across the wall instead of pooling it below.At 19.2 cm tall, it is well scaled for a bedside, beside a vanity mirror in a dry spot, along a hallway or inside a niche. It looks its best installed as a pair or in a short row. Note that its 21 cm reach from the wall is greater than its height, so allow for that projection when planning placement.Details Materials: Hand-formed crystal glass and brass Dimensions: 19.2 cm (7.6 in) H x 21 cm (8.3 in) D Backplate: 12 cm (4.7 in) Weight: Approximately 1.5 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount Use: Dry indoor locations only