Wall Sconces
Wall sconces in alabaster, brass, marble and glass for bedrooms, hallways, bathrooms and living rooms.
A hand-formed ceramic capsule, finished in an ivory crackle glaze, sits just in front of a dark bronze base. Light spills out from behind the ceramic body and travels across the wall, catching the fine lines of the glaze as it goes. Because the crackle develops during firing, the hairline pattern and the depth of the ivory differ from one sconce to the next.At only 8 cm deep, the fixture stays close to the wall, so it suits narrow hallways, stairways and the gaps between built-in cabinetry where a bulkier sconce would be in the way. Mounted in pairs, they give balanced light beside a bed. Set in a line, they wash a corridor in soft, warm light.Details Materials: Hand-formed ceramic with ivory crackle glaze, dark bronze base Dimensions: 45 cm (17.7") H x 12 cm (4.7") W x 8 cm (3.1") D Weight: Approximately 2.2 to 2.8 kg (5 to 6 lb) Light: Warm white, 2700K, indirect light cast from behind the body Installation: Hardwired wall mount, indoor use Note: Each glaze pattern is one of a kind
A single tall column of alabaster rises from a slender brass mount, carved thin so light passes through the stone itself. When lit, the entire column glows softly and its natural veining becomes the pattern you see on the wall.Because the stone is carved and finished by hand, each column has its own veining, color and translucency. The tall proportion shows off a long stretch of that figure. At just 8.3 cm deep, it sits close to the wall, which suits hallways, stairways and narrow passages. Mounted in a pair beside a bed or flanking a mirror, two sconces read as a set while each stone keeps its own character.Details Materials: Hand-carved natural alabaster, brass mount Dimensions: 45 cm (17.7") high, 15 cm (5.9") wide, 8.3 cm (3.3") deep Light: Warm white, 2700K, which draws out the honey tones in the stone Installation: Hardwired wall mount Note: Natural stone varies, so no two pieces are identical
A solid brass arm extends from a round backplate and carries the shade out into the room, so the light falls on your page or pillow instead of washing the wall behind it. It works best as a reading light, mounted beside a bed, next to an armchair or over a desk in a study. Hung in a pair at the head of a bed, it leaves both nightstands clear.The brass is left unlacquered and will age naturally, deepening in tone where hands touch it most. A black finish is also offered for a more graphic look.Details Material: Solid brass Finishes: Brass (unlacquered, ages naturally) or black Dimensions: 20.1" H x 9.8" W x 5.7" D (51 x 25 x 14.5 cm) Light: Warm white, 2700K Installation: Hardwired wall mount
A slender column of hand-cut clear crystal rises along a polished silver frame, catching light in every facet and scattering it as fine, bright points across the metal and the wall behind. The effect is crisp and luminous, with a warm cast from the recommended lamping.The shorter 53 cm height sits comfortably beside a bed, in a powder room, or as a matched pair flanking a mirror. The 90 cm version has the presence to hold a stairwell, a long hallway or a tall entrance.Details Materials: Hand-cut clear crystal on a silver frame Width: 20 cm (7.9") Heights: 53 cm (20.9") or 90 cm (35.4") Bulb type: E14 (E12 for North America) Recommended lamping: Warm white, 2700K Installation: Hardwired wall mount Also offered: The same design in smoked amber crystal
A tall column of alabaster set on a slim wall mount, this sconce glows along its entire length. Because the whole tube is lit, the natural veining reads as one continuous band of stone from top to bottom, with more of the pattern on show than a small shade could offer.Each tube is hand turned and finished from natural stone, so the veining, color and translucency vary from piece to piece. It sits well in a hallway, an entry or on a bedroom wall. Hung in pairs beside a bed or flanking a mirror, it casts a balanced column of light on each side.Details Material: Natural alabaster, hand turned and finished Dimensions: 54 cm (21.3") high, 15 cm (5.9") wide Weight: Approximately 1.6 to 2.2 kg (3.5 to 5 lb) Light: Warm white, 2700K Installation: Hardwired wall mount
A round disc of natural travertine sits against a wood back in this compact wall light. The stone's open, porous grain catches the light unevenly, giving the wall a soft, gentle glow closer to candlelight than to a typical lamp.Because travertine is quarried, every disc carries its own color, pitting and veining, and the wood backing varies as well. No two lights are quite alike. At 25 cm across, it sits comfortably beside a bed, in an entry or along a hallway, and looks especially good mounted in pairs or in an evenly spaced row.Details Materials: Natural travertine disc on a wood back Diameter: 25 cm (9.8 in) Weight: About 3 kg (6.6 lb) Light source: Integrated LED, warm white 2700K, no bulb to replace Mounting: Indoor wall mount
A shallow ceramic disc that sits close to the wall, this sconce measures 20 cm (7.9") in diameter and only 5 cm (2") deep. Its matte glaze has a gently irregular surface that softens the light and gives the piece the presence of a quiet sculptural object rather than a fixture.Every disc is fired on its own, so tone and texture vary slightly from one to the next. The green and taupe glazes are especially responsive, shifting in character as daylight and lamplight change through the day. The slim profile works well in hallways, along a stair, beside a bed or in a powder room, and several hung in a row in one color make a stronger composition than a single disc.Details Material: Ceramic with matte, slightly uneven glaze Dimensions: 20 cm (7.9") diameter, 5 cm (2") deep Weight: Approximately 1 to 1.8 kg (2 to 4 lb) Light: Warm white, 2700K Mounting: Hardwired wall mount Use: Indoor Finish note: Each piece is individually fired, so slight variation in tone and surface is expected
Pale quartz panels sit within a dark stainless steel frame, divided by a slim central fin. Because the quartz is natural stone, each panel carries its own clouding, color and degree of translucency, so no two sconces glow quite alike. When the light is on, the fin draws a fine shadow line straight down the middle.The sconce reads well in hallways, along stairs and in living rooms, and it sits comfortably beside warm wood, plaster walls or tailored upholstery. It is designed to hang vertically only, so settle on its placement before the wiring goes in.Details Materials: Natural quartz panels, dark stainless steel frame Large size: 24" H x 8.5" W x 0.5" D (61 x 21.6 x 1.3 cm) Small size: 24" H x 2.5" W x 0.5" D (61 x 6.4 x 1.3 cm) Light: Warm white, 2700K Orientation: Vertical mounting only Installation: Hardwired wall mount; secure into a stud or use reinforced anchors Also available: A matching lantern pendant in the same design
This petite wall sconce hides its light source behind a slab of blonde terracotta, sending a soft glow outward onto the wall instead of into the room. With no visible bulb, there is no glare. Switched off, it hangs like a piece of fired clay; switched on, the wall around it takes on a warm wash.Every slab is fired by hand, so the color, surface texture and the way light catches the edges will differ slightly from one piece to the next. The brass is given an antique finish that sits comfortably alongside the clay. Mounted in pairs flanking a vanity mirror, the backlighting is gentle on faces. Spaced along a hallway or placed beside a bed, it offers quiet ambient light without shining directly at anyone.Details Shade: Hand-fired blonde terracotta slab Metal: Brass in an antique finish Lighting effect: Backlit halo onto the wall, no exposed bulb Color temperature: Warm white, 2700K Installation: Hardwired Note: Color and surface vary naturally between pieces
A slim folded shape in textured iron, finished in champagne bronze. Instead of shining from a single opening, the light slips out through the cut-outs between each fold, casting a soft pattern across the wall.Small and very shallow, it suits a niche, a tight hallway or a bedside in a compact room. It also works well repeated along a long passage where a larger fixture would feel crowded.Details Size: 16 cm (6.3 in) H x 6 cm (2.4 in) W x 4 cm (1.6 in) D Material: Textured iron Light source: LED, warm white 2700K Weight: About 0.8 to 1.2 kg (2 to 3 lb) Installation: Hardwired to a standard wall junction box by an electrician. Use fixings suited to the fixture and your wall construction. Placement: For general wall use, center around 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only
Cut from a single block of natural alabaster, this sconce takes the form of a stepped pyramid that sits close to the wall. With the light off, it reads as a carved stone relief. Switched on, each tier glows at its own depth and the stone's natural veining comes forward in warm, soft light.Because the alabaster is quarried and shaped by hand, the veining, color and translucency vary from one sconce to the next, so no two are alike. Its slim 3.9 inch projection makes it a good fit for hallways, entryways and bedside walls. Its consistent form also works well repeated along a hotel corridor.Details Material: Solid natural alabaster with stainless steel Dimensions: 9.8 in H x 9.8 in W x 3.9 in D (25 x 25 x 10 cm) Weight: Approximately 9 to 11 lb (4.2 to 5 kg) Light source: Integrated LED, warm white 2700K, diffused through the stone Voltage: 110 to 240V, configured for the destination Installation: Hardwired wall mount. Secure into a stud or use anchors rated for the weight.
A slim oval of natural marble sits just forward of a brass backplate, held in place by two small pins so the stone appears to hover off the wall. The marble is cut thin enough for the integrated LED to glow through it, and the veining becomes the pattern once the light is on.Because the stone is natural, the cream and sand veins fall differently on every piece, and the thinner sections brighten first. At only 8 cm deep it sits close to the wall in a narrow hallway, and its height gives it enough presence beside a bed or a mirror. Mounted as a pair on either side of a vanity mirror at face height, it casts even, flattering light.Details Dimensions: 30 cm (11.8 in) H x 18 cm (7.1 in) W x 8 cm (3.1 in) D Materials: Genuine marble with a brass backplate; veining and tone vary naturally Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by an electrician Use: Indoor, dry locations only; beside a vanity, keep it outside wet zones Weight: Approximately 2.5 to 3.5 kg
Carved from natural travertine, this LED wall sconce carries the quiet, pitted texture and soft taupe coloring that make the stone so appealing. Because travertine forms over long periods in nature, the veining and surface character shift from piece to piece, so your sconce will have its own markings.The design draws on a Japandi sensibility, pairing restrained Japanese form with practical Scandinavian ease. When lit, the LED source washes the stone in a gentle glow that brings out its warm undertones, a calm choice for a living room, bedroom, hallway, entry or bath.Details Material: Natural travertine stone Color: Taupe, with natural variation in pattern and tone Size options: 35 cm or 60 cm Color temperature options: 3000K or 4000K Voltage: 90-260V AC Installation: Wall mounted
A solid bar of natural travertine, lit along its full length, this sconce turns a plain wall into a quiet line of glowing stone. It can be mounted vertically or horizontally, so it adapts to a narrow vanity wall as easily as a long corridor.Each bar is cut from quarried travertine chosen to be free of holes and marks. Tone, pores and veining vary from piece to piece, and the longer bars reveal more of that natural character. The shorter lengths sit well beside a bed, at a vanity or along a hallway. The 90 cm suits a living room or stair wall, and the 120 cm gives a feature wall or hospitality interior room for a long, uninterrupted line of light.Details Material: Natural travertine, selected without holes or marks Lengths: 35 cm (13.8"), 60 cm (23.6"), 90 cm (35.4"), 120 cm (47.2") Light source: Integrated LED Color temperature options: 3000K, 4000K or 6000K Orientation: Vertical or horizontal mounting Installation: Hardwired wall mount; longer lengths must be fixed into structure
Cut from natural yellow travertine, this wall light carries the stone's porous, organic surface and a warm honeyed color that softens any wall it sits on. Because the veining and tone shift from block to block, no two pieces look quite the same.An integrated warm white LED gives a gentle, settled glow that suits a bathroom vanity, a hallway or a stair landing, and the fixture is built to handle dust and water, so it can also be used outdoors under cover.Details Material: natural yellow travertine Dimensions: 190 mm diameter x 260 mm high (about 7.5 in x 10.2 in) Light source: 7W integrated LED, warm white; no bulb to replace Protection: dust-tight and resistant to water jets, suitable for bathrooms and covered outdoor areas Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Variation: natural stone veining and tone differ on every piece
A long rail of solid brass runs up the wall and ends in a small shade cut from natural onyx. Switched on, the stone lights from within, while the rail draws a clean vertical line that gives the sconce an architectural presence despite its slim profile.Because onyx is a natural mineral, each shade has its own color, banding and translucency, so every lamp glows a little differently. The tall, narrow form works well beside a bed where a table lamp would take up too much room, and it also suits a reading nook, an entry or a tight hallway. At the bedside, mount it so the shade falls just above shoulder height when you are sitting up.Details Materials: Solid brass rail, natural onyx shade Dimensions: 76 cm (29.9") H x 15.8 cm (6.2") W x 14 cm (5.5") D Weight: Approximately 5 to 7 kg (11 to 15 lb) Installation: Hardwired wall mount; secure to a stud or use appropriate wall anchors Recommended light: Warm white 2700K, which draws out the amber tones in the stone
Discs of natural marble sit on a slender brass frame, each one lit along its edge so the stone takes on a gentle glow while the wall behind it catches a soft wash of light. Because every disc is cut from real stone, no two share the same veining or tone, and in the larger arrangements that variation becomes the pattern of the whole fixture.A single stone or a small group of two or three works well beside a bed, in a powder room or along a corridor. Five, seven or nine discs build into a wall composition that reads more like artwork, suited to a living room, a stair wall or a hospitality interior.Details Materials: natural marble discs on a slim brass frame Configurations: 1, 2, 3, 5, 7 or 9 marble pieces Light: edge-lit LED Color temperature: warm white (2700K) or cool white Note: veining and tone vary naturally from disc to disc
A thin sheet of natural jade wraps around the light source in this compact sconce, secured by a single polished brass stud. When lit, the stone reveals soft clouding in cream and pale peach, and its edges dissolve into a gentle glow across the wall.Because the jade is cut fine enough for light to pass through, every piece carries its own pattern, color and degree of translucency. The sconce is meant for mood rather than task lighting, and it sits comfortably beside a bed, along a hallway or over a vanity. On a longer wall, a pair gives a more balanced effect than one alone.Details Material: Natural jade with a polished brass stud Dimensions: 20.7 cm (8.1") high, 15.8 cm (6.2") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount
A hand-turned alabaster sphere sits proud of a curved brass backplate, and when the lamp is on, the metal glows softly behind the stone. The effect is quiet and lunar: a pale orb set against a warm, lit field.Because the sphere is cut from natural alabaster, the veining is unique to each piece and becomes most visible once illuminated. At just over a foot tall, the sconce has enough presence to anchor a bedroom or living room wall by itself, and it suits a powder room or hallway where one strong object is all the wall needs.Details Materials: Natural alabaster sphere, curved brass backplate Dimensions: 22 cm (8.7") wide x 31 cm (12.2") high Light: Warm white, 2700K Installation: Hardwired wall mount
A solid block of alabaster, faceted by hand across every visible surface, sits flush against the wall with no shade or exposed fittings. When lit, the stone itself glows, and its natural veining becomes the pattern you see on the wall.Because each block is quarried stone, the color, veining and translucency vary from piece to piece, so no two lamps look quite alike. The smaller size works well beside a vanity, in a powder room or repeated along a hallway. The larger size has the presence to hold a bedroom wall, flank a fireplace or greet guests at an entrance, where it reads as much as sculpture as lighting.Details Material: Natural alabaster, hand-faceted Small: 30 cm (11.8") high, approx. 6 kg (13 lb) Large: 45 cm (17.7") high, approx. 9 kg (20 lb) Width: 15 cm (5.9") Depth: 10 to 12 cm (3.9 to 4.7") Light: Warm white, 2700K Installation: Hardwired; mount into a stud or use reinforced anchors to carry the weight
A frosted glass globe sits above a solid marble base in this compact wall sconce. The frosting diffuses the lamp fully, so the light stays gentle even when you are standing right beside it.Because the base is natural stone, each one carries its own veining and tone. Its modest height and soft glow suit a bedside wall or a vanity, and mounting one on each side of a mirror gives even, flattering light on the face.Details Materials: natural marble base, frosted glass globe shade Height: 38 cm (15 in) Base width: 12 cm (4.7 in) Shade diameter: 12 cm (4.7 in) Light temperature options: warm white (2700K) or cool white Installation: hardwired wall mount; suited to a dry, protected spot beside a vanity Note: veining and color vary from piece to piece
Carved natural alabaster meets solid brass in this up-down wall sconce, which sends light out through the top and bottom of the stone to wash the wall in both directions. Because the alabaster itself diffuses the glow, with no glass lens in between, the light comes through soft and warm.Each piece of stone has its own veining, color and translucency, so no two sconces look exactly alike. Choose a single head for a bedside, a hallway or a powder room, or two heads for a taller column of light beside a stair, in an entry or along a dining wall.Details Materials: hand-carved natural alabaster and solid brass Configurations: 1 head or 2 heads Height: 28 cm (11 in) Width: 10 cm (3.9 in) Depth: 14.5 cm (5.7 in) for 1 head; 12.5 cm (4.9 in) for 2 heads Weight: approx. 1.8 to 2.6 kg (4 to 6 lb) for 1 head; 2.4 to 3.4 kg (5 to 7 lb) for 2 heads Light direction: up and down Bulb type: E14 sockets (E12 for North America), warm white 2700K Installation: hardwired
A solid brass body holds glass diffusers at each end, sending light both upward and downward so the wall is washed in a soft glow while the room stays free of glare. The brass is left unlacquered and will darken gradually, taking on a richer, more lived-in tone with each passing year.The smaller version sits comfortably in a corridor or beside a doorway. The larger one has the presence to anchor a broader wall. Hung in evenly spaced pairs, either size brings a quiet rhythm to a hallway, living room or bedroom. The sconce is also offered in black stainless steel.Details Materials: Solid brass body with glass diffusers; also available in black stainless steel Finish options: Brass, Black Size options: 15 cm (5.9") and 30 cm (11.8") Dimensions: 32 cm (12.6") high, 27 cm (10.6") wide, 29 cm (11.4") projection from the wall Weight: Approximately 2 kg (4.4 lb) Light source: Integrated LED, warm white 2700K, no bulb to replace Light direction: Up and down Voltage: 110 to 240V Installation: Hardwired, indoor use CareThe brass is meant to age naturally. Expect the surface to deepen in tone over time as part of its character.
A sculpted half-bowl of black stainless steel, this sconce sends its light upward so the wall above glows while the room stays free of glare. The shade hides the bulb from view, leaving a soft wash that reads as part of the architecture.The effect is especially good on plaster, limewash or stone, where the grazing light picks out texture. Hang a pair along a hallway or stair, place one above a headboard, or use it to warm a powder room. For most rooms, set the center of the fixture roughly 63 to 71 in (160 to 180 cm) above the floor.Details Material: Black stainless steel (also available in brass) Dimensions: 13.4 in W x 5.1 in H x 7.3 in D (34 x 13 x 18.5 cm) Weight: Approx. 4 to 5 lb (1.8 to 2.4 kg) Light source: E26 socket for North America (E27 elsewhere), warm white 2700K recommended Light direction: Uplight only, no direct glare into the room Installation: Hardwired wall mount, indoor use