Lighting
Chandeliers, pendants, sconces, flush mounts, table lamps and floor lamps in brass, alabaster, glass and crystal. Every fixture is made to order in 8 to 10 weeks, with sizes and finishes adjusted to your space.
Solid wood beams lock together in a five-link grid, and twenty-one opal glass globes sit at the tips of the arms. The result is a long, architectural chandelier that reads as both sculpture and light, sized for a generous dining table or an open living area.Choose walnut for a deep, warm brown or ash for a pale tone with an open, visible grain. Brass fittings join the beams, and because the grain shifts from beam to beam, each fixture has its own character. The opal globes conceal the lamps and cast a soft, rounded glow. We recommend warm white at 2700K: the glass turns a creamy tone and the wood looks rich, while cooler light tends to make the globes look flat and the wood gray.Details Wood: solid walnut or solid ash, with brass fittings Shades: 21 opal glass globes Dimensions: 118 cm (46.5") long, 46 cm (18.1") wide, 46 cm (18.1") high Suspension: 50 cm (19.7") black rod as standard; overall drop about 96 cm (38") from the ceiling Lamping: 21 lamps; warm white LED at 2700K recommended; bulbs not included Weight: approximately 14 to 18 kg (31 to 40 lb) Installation: hardwired; must be secured to a ceiling joist or reinforced blocking by an electrician Sizing: suits a rectangular table of roughly 200 to 240 cm (79 to 94"); hang the lowest point 75 to 90 cm (30 to 35") above the tabletop Ceiling height: with the standard rod, works over a dining table with ceilings of about 2.4 to 2.6 m (8 to 8.5 ft) Light character: even, ambient glow in all directions; pair with dedicated task lighting over an island or desk CareTurn the fixture off and give the lamps time to cool before cleaning. Use a soft, dry cloth on the wood, and never let water or cleaning products touch it. The globes can be dusted dry, or wiped with a barely damp microfiber cloth when they need more attention, taking care that no moisture reaches the beams.
This floor lamp reads as much like a standing sculpture as a light. A slender armature shaped like branching twigs, in iron with a warm brass-tone finish, holds five slumped glass screens printed with botanical motifs. Each screen is lit from within and gives off its own soft, patterned glow, so the lamp fills a room with gentle ambient light rather than a direct beam.The glass is hand finished, so the screens differ slightly from one another and no two lamps are quite alike. With its screens reaching outward, it looks best with open space around it, such as a generous living room corner, a hotel lounge or a loft.Details Dimensions: H 166 cm × W 60 cm × D 60 cm (65.3 × 23.6 × 23.6 in) Materials: iron twig armature with brass-tone finish, five kiln-slumped printed glass screens Light source: integrated LED modules, 2700K warm white Light effect: patterned ambient wash across all five screens, not intended as a reading light Voltage: 110 to 240V, configured for your region Installation: plug-in with in-line switch Weight: approximately 10 to 13 kg Use: dry indoor locations only Variation: hand-finished glass varies from screen to screen CarePlace the lamp away from busy walkways so the projecting glass screens are not knocked.
Three rings of solid alabaster float one beneath another in this halo chandelier, each suspended at its own height on slender stainless-steel cables. The rings measure 100 cm, 80 cm and 50 cm across, and an LED concealed inside each one lights the stone from within. The result is a soft, even glow with no visible bulbs, while the natural veining traces a slightly different pattern around every circle.The light is set at 2700K warm white, which brings out honey and cream tones in the stone and lets the amber and gray veining read with depth. With the largest ring at 100 cm, the fixture sits well above a dining table of roughly 180 to 240 cm (71 to 94"), in a living room of about 5 x 6 m (16 x 20 ft), or in a stairwell where it can be viewed from below and from the side. It gives ambient light, so a kitchen island or desk will still want dedicated task lighting nearby.Details Ring diameters: 100 cm / 80 cm / 50 cm (39.4 / 31.5 / 19.7") Ring height: 7 cm (2.8") each Shade material: solid Spanish alabaster with natural veining that varies by ring Finish options: Gold, with solid brass canopy and fittings; Black, with black-finished stainless steel canopy and fittings Suspension: adjustable stainless-steel cables, 100 cm (39.4") standard, for an overall drop of about 120 cm (47.2") Ceiling height guide: with standard cables over a dining table, about 2.7 to 2.9 m (9 to 9.5 ft) Hanging height: lowest ring 75 to 90 cm (30 to 35") above a tabletop Light source: integrated LED, 2700K warm white Output: approximately 5,500 to 7,000 lumens total Weight: about 24 to 30 kg (53 to 66 lb) Installation: hardwired; supplied with multi-point ceiling anchors. An electrician should secure it to a joist or reinforced blocking, as a typical ceiling box is not enough to carry the load. CareTurn the fixture off and give it time to cool before cleaning. Alabaster is soft and absorbent, so clean it only with a dry, soft cloth or a feather duster, and keep water, sprays and cleaning products away from it. The metal parts also need nothing more than a dry cloth; avoid metal polish.
Three slabs of natural crystal, each cut by hand, sit one above another in a slender brass frame. Lit together, they carry a column of warm light up the wall, giving this sconce a vertical presence that a single stone could not.Because every slab is shaped by hand, no two stones match, even on the same fixture. At 31.3 inches tall, it reads best where there is height to fill: a stair wall, a double-height entry, a long hallway or a tall bedroom wall. It works on its own or mirrored as a pair, and can sit beside a vanity in a dry, protected spot.Details Dimensions: 79.4 cm (31.3 in) H x 15.2 cm (6 in) W x 14 cm (5.5 in) D Projection from wall: 14 cm (5.5 in) Materials: three hand-cut natural crystal slabs in a brass frame Finishes: brass, silver or black Bulbs: E12 sockets in North America, E14 in other markets; 2700K warm white recommended Weight: approximately 7 to 9 kg Installation: hardwired to a wall junction box; because of its weight, fix into structure or a rated box with reinforced mounting Use: dry indoor locations only
Three shallow copper discs sit at staggered heights on a slender tripod frame, each one casting its own pool of light downward so the beams overlap softly below. The structure stays open and light to the eye, letting the warm glow of the metal carry the design.At 198 cm (78 in) tall with a 105 cm (41.3 in) footprint, the lamp wants room around it. It works well beside a sofa grouping, a lounge chair or a low table, set back from the main walkway so the legs and projecting shades stay clear of foot traffic.Details Material: Copper frame and shades Overall dimensions: Ø105 × H198 cm (Ø41.3 × H78 in) Shades: Three, each Ø41 × H10 cm (Ø16.1 × H3.9 in) Bulbs: 3 × E27, configured as E26 for North America Light temperature: 2700K warm white by default Installation: Plug-in floor lamp Cord length: 152 cm (59.8 in) Weight: Approximately 10 to 15 kg CareFor dry indoor use only.
Three fan-shaped shades overlap on a slender dark metal frame, their pleated fabric recalling leaves caught mid-fold. When lit, the pleats break the light into a soft, layered glow that settles warmly across a room.At 190 cm tall and 100 cm wide, this lamp carries real presence. It reads as a sculpture by day and a gentle ambient source by night. Give it an open wall or a generous corner, and keep the projecting shades away from busy walkways. A heavy weighted base keeps the composition steady.Details Dimensions: W 100 x H 190 cm (39.4 x 74.8 in) Materials: Pleated fabric shades on an iron, stainless steel and alloy structure with weighted base Colors: Brown, Blue, Red, White Weight: Approx. 18 kg Bulbs: 3 x E27 Color temperature: 2700K warm white Voltage: 110V or 240V, matched to your region Use: Dry indoor locations only
Slender black resin limbs rise and divide like a young tree, then spread into a wide canopy finished in a gold tone. The lamp reads as sculpture first, with a silhouette that holds its own in a living room, an entry or a hotel lobby.The integrated LED shines upward into the underside of the canopy, so the light reaches the room softly and indirectly. It gives warm ambient light rather than a focused beam for reading. The 160 cm version sits comfortably beside a sofa or chair. The taller sizes work best where the branches have open wall or ceiling space around them. Keep the spreading top clear of walkways.Details Sizes: H160 × W50 cm (63 in tall); H180 × W65 cm (70.9 in tall); H200 × W70 cm (78.7 in tall) Material: Resin with black exterior and gold-toned canopy Weight: Approximately 6 to 10 kg, depending on size Light source: Integrated LED, directed upward for indirect light Color temperature: 2700K warm white Use: Dry indoor locations only
A shallow bowl of travertine sits against the wall, bound with a thick wrap of natural rope. The light travels mostly upward and outward, washing the surface behind it so the room receives a soft glow while the stone shows off its pitted, organic grain.Both materials are meant to change with time. The rope is knotted in place instead of glued, and the travertine gains character as it ages. Its compact footprint suits a hallway or stair wall, and it sits comfortably in coastal, rustic or Japandi interiors where the rope feels like a natural part of the scheme.Details Materials: Travertine bowl with natural fiber rope Dimensions: 20 cm (7.9") high, 16 cm (6.3") wide, 7 cm (2.8") deep Light distribution: Primarily upward and outward onto the wall Bulb type: G9 Color temperature: Warm white, 2700K Installation: Wall mounted, hardwired
Two softly rounded rectangles of travertine sit one over the other, forming a slim sconce that glows only at its edges. Light escapes from the top and bottom in a warm, fanned wash, while the stone at the center stays solid and opaque.The travertine is chosen free of holes and marks, yet keeps its natural pores and gentle shifts in color, so the surface stays interesting even when the lamp is off. Every piece is different. With a depth of just 7 cm, it works well in a narrow hallway, along a staircase or beside a bed, and the upward and downward glow lends a sense of height to a plain wall.Details Material: Natural travertine, two overlapping layers Dimensions: 19.5 cm (7.7") W x 18.5 cm (7.3") H x 7 cm (2.8") D Light: Warm white, 2700K, directed up and down Mounting: Wall mount, hardwired
A slim column of solid travertine, turned into a cylinder and set on a wood backplate, this sconce washes light both upward and downward along the wall. Where the beam meets the edges of the stone, its natural open pores pick up the glow and give the surface a soft, textured presence.The stone is chosen free of holes and surface blemishes, yet tone and veining still vary from one piece to the next, so each sconce lights a little differently. The narrow form sits comfortably in a hallway, along a staircase, beside a bed or in a powder room. Several mounted at even intervals tend to look more considered than one alone. For most rooms, place the center roughly 59 to 63" (150 to 160 cm) above the floor.Details Material: Solid travertine cylinder on a wood backplate Dimensions: 12.6" (32 cm) high, 2.8" (7 cm) diameter Weight: Approximately 4 to 7 lb (2 to 3 kg) Light source: Integrated LED, warm white 2700K, no bulb to replace Light direction: Up and down Voltage: 110 to 240V, configured for the destination Installation: Hardwired Natural variation: Tone and veining differ on every piece
A column of solid travertine, stacked in geometric blocks, rises beneath a textured fabric shade. The stone is honed smooth, yet its natural pitting is left open, so the surface catches shadow and each column carries its own character.Standing 80 cm tall, this lamp has the presence of a compact floor lamp. Give it a console, an entry surface or a generous bedside table with room for its 40 cm square footprint and clear space overhead.Details Materials: solid honed travertine base, textured fabric shade Dimensions: 80 cm (31.5") high, 40 cm (15.7") square Cord length: 180 cm Bulb type: E26 socket (E27 outside North America) Recommended lamping: warm white, 2700K Also available: as a floor lamp
Stacked blocks of natural travertine rise from an octagonal base to carry a pleated fabric shade. The stone brings its pores, veining and quiet irregularity to a form that is otherwise clean and architectural, so the lamp reads as both sculptural and calm.At 160 cm tall with a compact footprint, it sits comfortably beside a sofa, a reading chair or a bed, ideally where the stone base stays in view. The shade diffuses the light into a soft, warm ambient glow.Details Dimensions: W45 × D45 × H160 cm (17.7 × 17.7 × 63 in) Materials: Natural travertine with a pleated fabric shade Natural variation: Pores, veining and color differ from piece to piece Weight: Approximately 12 to 18 kg Bulb: 1 x E26 (configured as E27 where required) Color temperature: 2700K warm white by default Use: Dry indoor locations only
A slab of natural travertine rests against a wooden backplate, with a warm LED tucked behind the stone. When the light is on, it glows through the travertine's open pores and catches the grain of the wood beside it, so the stone itself does the work of a shade.Because travertine is a quarried stone, every slab carries its own color, pitting and veining, and no two lights look exactly alike. The 55 cm length sits comfortably in a corridor, bedroom or stairwell. The 90 cm length reads as a long horizontal line in a living room or extended hallway.Details Materials: natural travertine with a wood back Lengths: 55 cm (21.7 in) or 90 cm (35.4 in) Light source: integrated 8W LED, warm white 2700K, no bulb to replace Voltage: 110 to 240V, configured for the destination Weight: approximately 4 kg (9 lb)
A wide brass dome sits atop a slender, tapering column wrapped in leather, giving this floor lamp the composed air of a mid-century study. The shade casts its light downward, pooling a warm glow over a book, a desk or the arm of a favorite chair.Both materials age with grace. The brass gathers a soft patina and the leather deepens in tone, so the lamp gains character the longer you live with it. A weighted base keeps it steady, and its broad shade suits a reading corner or desk side better than a narrow walkway.Details Dimensions: 57.1 in (145 cm) high; shade 18.1 in (46 cm) diameter Materials: Brass and leather Weight: Approx. 40 lb (18 kg), with weighted base Bulb base: E12/E14 Color temperature: 2700K warm white by default Use: Dry indoor locations only Natural variation: Leather tone, texture and brass patina vary slightly from piece to piece and develop over time
This compact wall sconce builds a short vertical composition from three distinct elements: a metal arm, a polished sphere of red marble and a carved alabaster cup. At just over 13 inches tall, it suits walls where a larger fixture would feel crowded, such as a narrow pier between windows, a small powder room or the space beside a bed.Mounted in pairs on either side of a vanity mirror, the alabaster softens the light and casts it toward the face instead of straight down onto the counter. Because the marble and alabaster are natural stone, the color and veining of each piece are its own.Details Materials: polished red marble sphere, carved alabaster cup, metal arm Finish options: brass or black Dimensions: 34 cm (13.4 in) H x 14 cm (5.5 in) W x 11 cm (4.3 in) D Light color: warm white, 2700K Mounting: wall mounted Natural stone, so color and veining vary from piece to piece
This sconce is built as a vertical stack. A brass arm carries two polished brown marble spheres, and above them sits a hand-carved alabaster dome. The dome sends light downward, so the glow falls on the surface below the fixture and stays out of your line of sight.Because marble and alabaster are natural stone, each sphere and dome has its own veining. No two fixtures look exactly alike. Mounted beside a bed, the light lands on the nightstand. It also works well above a console, next to a vanity, or in a dressing room where you need light on a surface.Details Materials: brass arm, polished brown marble spheres, hand-carved alabaster dome Finish options: brass or brushed black Height: 38.6 cm (15.2 in) Width: 15 cm (5.9 in) Depth: 16 to 18 cm (6.3 to 7.1 in) Light: warm white, 2700K, directed downward Installation: hardwired wall mount
A sphere of carved alabaster sits against a solid brass wall plate, a simple pairing that lets the stone do the work. When lit, the globe glows evenly all around, giving a soft, diffused light with no harsh beam.Because each globe is turned from natural stone, the veining, color and translucency vary from one piece to the next. Smaller globes have thinner walls, so they tend to appear brighter. The 10 and 12 cm sizes sit well in a hallway or powder room, or repeated along a long wall. The 15 cm suits a bedside or entry, and the 20 cm holds its own alone on a larger wall.Details Materials: natural alabaster globe, solid brass wall plate Globe diameter options: 10 cm (3.9"), 12 cm (4.7"), 15 cm (5.9"), 20 cm (7.9") Wall plate: 15 cm (5.9") Light source: integrated LED, warm white 2700K Output: approximately 300 to 550 lumens, depending on size Weight: approximately 1.8 to 3.5 kg (4 to 8 lb) Voltage: 110 to 240V Installation: hardwired wall mount
Layered plaster shells step down the wall in this sconce, concealing the light source so the glow spills softly outward and forms a halo on the surface behind it. The matte plaster is hand finished, which means each piece carries slight shifts in tone, both from one sconce to the next and between its own tiers.Choose one tier for a powder room or narrow passage, two for a bedside wall or entry, or three for a tall vertical line along a stairway or long corridor. At only 10 cm (3.9 in) deep, it sits close to the wall where clearance is tight.Details Material: Real plaster with a hand-applied matte finish Colors: Beige or light grey 1-Tier: 30 cm (11.8 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 1.8 to 2.2 kg (4 to 5 lb) 2-Tier: 45 cm (17.7 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 2.4 to 3 kg (5 to 7 lb) 3-Tier: 57 cm (22.4 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 3.5 to 4.2 kg (8 to 9 lb) Light source: Built-in, warm white 2700K Installation: Hardwired to a wall junction box by an electrician; use fixings suited to the fixture weight and wall construction Suggested placement: Center roughly 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only; not for bathrooms with direct moisture or outdoors
This chandelier gathers hand-blown glass spheres in smoky gray around a brass frame with a gold finish. The color is in the glass itself, and the globes vary from milky to more translucent, so the cluster reads with real depth. As with any hand-blown glass, each globe carries small variations in tone and shape.The gray responds to the light inside it. With warm white lamps at 2700K, each globe glows a soft café tone at its center, while cooler light leaves the glass looking flat and steely. Warm lamping is part of how this piece is meant to be seen. Light travels through the globes in every direction for an even ambient glow, and with eighteen lamps it can carry a room on its own. Over a desk or kitchen counter, add task lighting.At 80 cm wide, it sits well over a round or square table of about 140 to 180 cm (55 to 71 in), in a living room of roughly 4 × 5 m (13 × 16 ft), or in a large bedroom. Its 100 cm height gives it considerable volume, so a ceiling with some height suits it best. Over a table, hang the bottom 75 to 90 cm (30 to 35 in) above the surface.Details Glass: Hand-blown spheres in smoky gray, mixed milky and translucent Frame: Brass with gold finish Dimensions: 80 cm (31.5 in) wide × 100 cm (39.4 in) high Lamps: 18; warm white LED at 2700K recommended, about 3,000 to 4,200 lumens total Weight: About 15 kg (33 lb) Installation: Hardwired; should be fixed by an electrician to a joist or reinforced blocking CareSwitch off and allow the lamps to cool first. Dust the globes with a soft dry cloth or feather duster. For a deeper clean, apply a little mild glass cleaner to a damp microfiber cloth and wipe the glass, never spraying the fixture directly. Keep abrasive products away from the gold finish.
Three concentric brass rings carry overlapping ovals of swirled glass, with every oval hanging from its own brass pin. The effect is layered and scale-like, closer to plumage than to a solid shade. Each piece of clear glass holds white streaks drawn through its interior, so the pattern lives within the glass itself. Some ovals are nearly transparent with a single pale thread, while others are thick with cloudy white, and that variety across the three tiers gives the fixture its character.The lamps are hidden inside the drum behind the innermost ring, so you never see a bulb from ordinary angles. Light travels through two or three layers of glass on its way out, which produces a warm, dappled glow: brighter through the clearer ovals, softer through the dense ones, with the bottom tier casting the most light downward. Think of it as atmosphere and presence over a table rather than even task lighting.Details Diameter: 38.5" (97.8 cm) Height: 24.25" (61.6 cm) Frame: solid brass rings, pins and chain in a satin finish Glass: clear swirled glass with white streaking, three tiers of overlapping ovals; individual ovals can be removed and replaced without taking a tier apart Light source: 11 x E12 candelabra sockets, bulbs not included Recommended bulbs: matching lamps at 2700K in all sockets, since mixed color temperatures show through the glass Dimming: standard version is not dimmable Suspension: chain from a ceiling plate; shorten the drop by taking out links Dining placement: suits a table about 58" to 77" (147 to 195 cm) wide, with the bottom glass 30" to 36" (76 to 91 cm) over the surface Room placement: scaled for a room of roughly 18 x 20 ft (5.5 x 6 m); without a table below, plan on a ceiling of at least 9 ft for head clearance InstallationThis is a heavy fixture. It should be secured to a ceiling box rated for its weight and backed by a joist or blocking, so have your electrician check the ceiling structure ahead of time. Hang and level the brass frame before adding any glass. The ovals arrive packed on their own and go on ring by ring, starting at the bottom; plan on two people and some patience. Hold the glass by its edges, because fingerprints and smudges become visible once the lamps are on.CareUse a soft brush to remove dust from the glass, since a cloth tends to snag on the edges and pins. Do not spray any cleaner on the fixture, as moisture collects in the fittings and leaves spots. For the brass, wipe with a cloth that is only slightly damp and dry it right away. Skip metal polish, which strips the satin surface and creates shiny patches.
Three concentric brass rings carry overlapping ovals of swirled glass, each one hung from its own brass pin. The result reads as layered scales rather than a closed drum. Clear glass is threaded with white streaks that sit within the body of each plaque, and no two ovals share the same pattern. Some are nearly clear, others are heavily clouded, and that variation across three tiers gives the fixture its character.At 26.5" across and 24" deep, the chandelier is almost as tall as it is wide, so it is meant to be seen from the side as well as from below. It suits an entrance hall, a stair landing or a dining room with generous ceiling height, and it will feel heavy under an 8 ft ceiling. The lamps hide behind the innermost tier, so light filters through two or three layers of glass before reaching the room. Expect a warm, broken glow, brighter where the glass is thin and softer where it is dense, with the lowest tier casting the most light downward. It gives warmth and presence rather than flat, even illumination.Details Dimensions: Ø 26.5" (67.3 cm) x 24" (61 cm) deep Also available: Ø 38.5" (98 cm), only about a quarter inch deeper Glass: Hand-blown clear glass ovals with white swirl streaking Metal: Solid brass rings, pins and chain in a satin finish Weight: 78 lb (35.4 kg) Chain: 72" (183 cm); maximum drop 95" (241 cm) Canopy: 5" (12.7 cm) Bulbs: 8 x E12, not included; matching 2700K lamps recommended in every socket Dimming: Standard version is not dimmable; a dimmable version is available Dining sizing: Suits a table about 40" to 53" (100 to 135 cm) wide, with the lowest glass 30" to 36" (76 to 91 cm) above the surface Room sizing: Best in a room of roughly 12 x 14 ft (3.7 x 4.3 m) Installation: Chain suspended, with height adjusted by taking out links. The weight exceeds a typical ceiling box, so it requires a load-rated box with a joist or blocking behind it, checked by an electrician in advance. Hang and level the brass frame before adding glass, then place plaques ring by ring starting at the bottom. Plan on two people, and hold the glass by its edges to avoid marks that show when lit. Maintenance: Individual plaques lift off their pins for replacement without taking a tier apart CareUse a soft brush on the glass, since a cloth tends to snag on the plaque edges and pins. Do not spray any cleaner on the fixture, as it seeps into the fittings and leaves residue. For the brass, wipe with a lightly dampened cloth and dry right away. Avoid metal polish, which strips the satin surface and leaves shiny spots.
This chandelier is built from concentric rings of Spanish alabaster, each tier narrower than the one above it, so the silhouette steps inward in a way that recalls Art Deco design. It hangs from a solid brass canopy on a brass chain, and comes in sizes from two tiers up to five.Alabaster is a soft, translucent stone with natural clouding and veining, and the panels are not matched from tier to tier. You can choose more veining, less veining or a random mix. Unlit, the fixture looks like carved, layered stone. Lit, each tier glows from inside and every panel softens the light in its own way. The lamps are concealed within the tiers, so light spreads both upward and downward through the stone for a soft, ambient glow rather than a focused downlight. Over a kitchen island or a work surface, plan on separate task lighting.Warm light matters with this stone. At 2700K the alabaster turns a honey and cream tone, and the veins read as gentle amber and gray drifts. Cooler light makes it look flat and gray-white, so warm white bulbs are recommended.Details Materials: Spanish alabaster panels; solid brass frame, canopy, chain and hardware 2 tiers: 45 cm (17.7") wide, 58 cm (22.8") high, about 10 kg (22 lb) 3 tiers: 60 cm (23.6") wide, 65 cm (25.6") high, about 16 kg (35 lb) 4 tiers: 80 cm (31.5") wide, 70 cm (27.6") high, about 25 kg (55 lb) 5 tiers: 100 cm (39.4") wide, 77 cm (30.3") high, about 60 kg (132 lb) Chain: 1 m (39.4"), adjustable; at full length the 2-tier drops about 158 cm (62") and the 5-tier about 177 cm (70") Bulbs: E14, from 12 on the smallest size up to 48 on the largest; warm white 2700K LED recommended; bulbs not included Installation: hardwired; the 4 and 5-tier sizes should be anchored to a joist or reinforced blocking, not a standard ceiling box Other finishes: also offered with a black stainless steel frame Sizing Guide 2 tiers: round tables of roughly 80 to 100 cm (31 to 39"), powder rooms, hallways 3 tiers: tables of roughly 100 to 130 cm (39 to 51"), bedrooms 4 tiers: tables of roughly 130 to 170 cm (51 to 67") 5 tiers: tables of roughly 170 to 220 cm (67 to 87"), entrance halls, stairwells Over a table, set the lowest tier 75 to 90 cm (30 to 35") above the tabletop CareTurn the fixture off and give the bulbs time to cool before cleaning. Because alabaster is soft and porous, clean it only with a dry, soft cloth or a feather duster, and never apply liquids, sprays or cleaning products. For the brass, a dry cloth is enough; avoid metal polish.
A slim cylinder of solid copper, opened by a single vertical cut. When lit, the slit sends a narrow band of warm light both upward and downward along the wall, so the fixture reads less as a lamp and more as a line drawn in light.The copper is left untreated to age naturally. Over time it deepens in tone and builds an uneven patina, giving the piece a quiet richness that grows with the years. The smaller size sits well beside a bed, in a powder room or repeated at close intervals down a corridor. The larger size holds its own in a hallway, an entry or along a stairwell.Details Material: Solid copper, unlacquered, develops a natural patina Width: 8 cm (3.1 in) Small: 35 cm (13.8 in) tall, approximately 850 to 1,000 lumens Large: 55 cm (21.7 in) tall, approximately 1,300 to 1,500 lumens Light source: Integrated LED, warm white 2700K Light distribution: Up and down through a vertical slit Installation: Hardwired wall mount
This linear chandelier sets a single row of hand-carved Spanish alabaster panels beneath a solid brass beam. There are no tiers and no added ornament, only a long band of stone that glows softly when lit.Because alabaster is a natural stone, each panel carries its own veining, tone and translucency, so no two fixtures look quite the same. Over a long dining table or kitchen island, it reads as one calm, continuous line of light.Details Materials: hand-carved Spanish alabaster panels on a solid brass beam Frame finish: gold (brass) or black (black stainless steel) 152 cm size: 152 cm (59.8") long, 50 cm (19.7") wide, 38 cm (15") high; about 28 to 36 kg (62 to 79 lb) 183 cm size: 183 cm (72") long, 50 cm (19.7") wide, 38 cm (15") high; about 36 to 46 kg (79 to 101 lb) Sizing guidance: the 152 cm suits a table seating ten or an island of roughly 240 to 300 cm (94 to 118"); the 183 cm suits a table seating twelve or more Hanging height: panels 75 to 90 cm (30 to 35") above the table or counter Lamping: E14 sockets (E12 for North America), warm white 2700K Installation: both sizes require a structural ceiling fixing installed by an electrician