Wall Sconces
Wall sconces in alabaster, brass, marble and glass for bedrooms, hallways, bathrooms and living rooms.
A curved arm in solid brass reaches out from the wall and holds a clear glass shade at its tip. Because the shade sits well forward of the backplate, the light lands on the page, the mirror or the path ahead instead of washing the wall behind it.That reach makes it a genuinely useful fixture beside a bed, next to a reading chair, along a hallway or flanking a vanity. Mounted in pairs on either side of a headboard, it looks especially settled. Since the bulb is visible through the clear glass, a warm filament lamp is a worthwhile choice.Details Finish: Brass or black (black version in stainless steel) Materials: Solid brass arm, clear glass shade Dimensions: W 18 cm (7.1") x H 41 cm (16.1") x D 22 cm (8.7") Weight: Approximately 2.5 kg (5.5 lb) Lamp: E27 socket (E26 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Installation: Hardwired, for indoor use
Brushed copper and amber-tinted glass come together in this wall sconce, the metal cool and matte against the honeyed warmth of the shade. When lit, the glass softens the bulb into a gentle, golden ambient glow that sits comfortably in a bedroom, living room or hallway.The copper is left to age naturally, so it will slowly deepen and develop a patina over the years. It suits contemporary, mid-century and industrial interiors alike.Details Materials: brushed copper, amber glass shade Dimensions: H 32 cm × W 27 cm × projection 29 cm Light source: E27 or E14 socket; warm LED bulb recommended (not included) Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Weight: approx. 2 kg Use: indoor only Finish note: copper will naturally patina over time
A bubbled glass shade sits within a slim brass frame, and the air pockets trapped in the glass scatter the light as it passes through. The result is a softly mottled glow across the wall rather than a flat wash.Every shade is hand blown with the bubbles worked in, so no two carry quite the same pattern or density. It reads best where the glass can be seen up close, such as a hallway, dining room, bar or bedroom.Details Materials: Brass frame with hand-blown bubbled glass shade Dimensions: 50 cm (19.7") high, 18 cm (7.1") wide, 10 cm (3.9") deep Light: Warm white, 2700K Installation: Hardwired wall mount
A panel of carved alabaster sits within a slim solid brass frame, forming a tall, narrow sconce that measures 47 cm (18.5") high by 12 cm (4.7") wide. With the light source hidden behind the stone, the alabaster comes alive with a soft, even glow, and its natural veins become the main feature. The brass stays quiet, framing the stone with a fine, crisp line.Because each panel comes from natural stone, its veining, color and translucency vary from one piece to the next, so every light has its own character. The upright shape works well on a bedroom or dining room wall and in entryways and hallways. It looks especially good mounted as a pair on either side of a bed or a doorway.Details Materials: Carved natural alabaster panel, solid brass frame Dimensions: 47 cm (18.5") H x 12 cm (4.7") W Weight: Approximately 2.5 to 3.5 kg (5.5 to 7.7 lb) Light source: Integrated LED, concealed from view Light temperature options: Warm white (2700K), cool white or daylight Installation: Hardwired wall mount, for indoor use
An amber glass shade sits against a solid brass body in this wall sconce, and the tinted glass gives the light a honeyed cast instead of a cool white. At 29 cm (11.4") of projection, it carries its glow well out into the room, so it works best where mood matters more than task lighting: a bedroom, a living room or a long hallway.For a sharper contrast, the same form is offered in black stainless steel.Details Materials: Solid brass body (black option in black stainless steel), amber-tinted glass shade Finish options: Brass, Black Height: 32 cm (12.6") Width: 27 cm (10.6") Projection from wall: 29 cm (11.4") Weight: Approximately 2 kg (4.4 lb) Bulb base: E27 (E26 for North America) Recommended light: Warm white, 2700K Voltage: 110 to 240V, configured for the destination Installation: Hardwired wall mount, indoor use
A turned globe of natural alabaster rests against a solid brass disc in this wall sconce. Light falls back onto the brass behind the stone, so the globe glows in front of a softly lit backdrop rather than against a bare wall.Because each globe is cut from real stone, the veining and translucency vary from piece to piece. The smaller globes appear brighter, since their stone walls are thinner. The 20 cm size works well in a corridor or powder room, the 26 cm suits a bedside or entrance, and the 35 cm holds its own alone on a larger wall.Details Materials: Natural alabaster globe, solid brass disc 20 cm size: 20 cm (7.9") disc with 12 cm (4.7") globe 26 cm size: 26 cm (10.2") disc with 15 cm (5.9") globe 35 cm size: 35 cm (13.8") disc with 20 cm (7.9") globe Light: Warm white, 2700K Installation: Hardwired wall mount
A face of natural marble sits within a slender brass frame, lit from behind so the stone's veining becomes the whole design. The metal stays in the background as a fine, warm outline, leaving the marble to carry the piece.Choose the round version for a bedside, an entry, or a matched pair flanking a mirror. The taller oval reads as a vertical accent on a dining wall, in a living room or along a hallway, and it shows a longer sweep of the stone's pattern. Because the marble is natural, veining, tone and translucency vary from one piece to the next.Details Materials: natural marble with brass structure Round: 20 cm (7.9") diameter, approx. 2 to 3 kg (4 to 7 lb) Oval: 16.5 × 42.5 cm (6.5 × 16.7"), approx. 3.5 to 5 kg (8 to 11 lb) Light source: integrated LED, warm white 2700K Installation: hardwired wall mount, for indoor use
A slender panel of natural onyx sits within a fine frame of brushed brass, lit from behind so the stone's veining glows and the metal reads as a quiet outline. Because onyx is a natural mineral, each panel has its own banding, color and translucency, so no two sconces look quite alike.The small size, at 40 cm tall, works beside a bed or as a pair flanking a mirror. The large size, at 90 cm, shows a longer stretch of veining and has the presence to hold a hallway or a tall wall by itself.Details Materials: Genuine onyx and brushed brass Small: 40 cm (15.7") high, 15 cm (5.9") wide, 10 cm (3.9") deep, approx. 3 to 4 kg Large: 90 cm (35.4") high, 15 cm (5.9") wide, 10 cm (3.9") deep, approx. 6 to 8 kg Light source: Integrated LED, warm white 2700K, indirect and low glare, backlit through the onyx Installation: Hardwired wall mount; the large size should be fixed into a stud or with reinforced anchors Use: Dry indoor locations
A gold metal disc with a hand-worked surface, lit from behind so a soft halo spreads across the wall around its edge. With the light off, it looks more like a hammered plate hung on the wall than a fixture.Because the texture is formed in the metal itself, light plays differently across each disc and even across a single face, giving every piece its own character. It sits well in a hallway, bedroom, living room or along a stair wall, and hanging two or more in a line makes the glow read more strongly than one alone.Details Material: Textured metal Finish: Gold, with other finishes available to specify before production Diameter: 28 cm (11 in) Light: Backlit halo effect, warm white 2700K Mounting: Wall mount, hardwired
A slab of natural calcite sits upright in a solid brass frame, and when the lamp is on, light travels through the stone itself. What you see is the mineral's own banding, glowing from within.Every slab is cut by hand, so no two are alike. Clarity, banding and the way each piece holds light will vary, which gives each sconce its own character. The slim, vertical profile fits comfortably on a narrow wall, beside a bathroom mirror, next to a bed or along a hallway, and it looks especially good mounted as a pair.Details Materials: hand-cut natural calcite, solid brass frame Dimensions: 26 cm (10.2") high, 15.2 cm (6") wide, 14 cm (5.5") deep Light: warm white, 2700K Installation: hardwired wall mount Bathroom use: suitable beside a vanity in a dry, protected position
A thick, hand-formed glass shade sits within a slim stainless steel frame, giving this compact sconce a dense, sculptural presence on the wall. Because each shade is shaped by hand, its thickness and the small marks within the glass differ slightly from one piece to the next, so no two are quite alike.The modest footprint works well where a larger fixture would feel crowded: flanking a vanity mirror, beside a bed or along a corridor. Choose the black frame for a crisp, graphic look, or brass for a warmer contrast against the glass.Details Materials: Hand-formed thick glass shade, stainless steel frame Finish options: Black or brass Height: 24 cm (9.4 in) Width: 14 cm (5.5 in) Projection from wall: 15 to 17 cm (5.9 to 6.7 in) Light: Warm white, 2700K Installation: Hardwired wall mount Placement: Suitable beside a vanity in a dry, protected spot away from direct water Finish selection: Specified before production
A ring of glass rests against a brass backplate, lit from inside so that the halo glows and casts a gentle circle of light onto the wall around it. The effect is quiet and graphic, drawing on Art Deco geometry without feeling like a period copy.The round silhouette reads best against a plain wall. Consider it beside a bed, along a hallway, in a powder room, or mounted as a pair on each side of a framed artwork.Details Materials: Glass and brass Dimensions: 29.2 cm (11.5") high, 26 cm (10.2") wide, 15 cm (5.9") deep Weight: Approximately 1.8 to 2.2 kg (4 to 5 lb) Bulb: E14 base Color temperature: Warm white, 2700K Installation: Hardwired wall mount
A capsule of hand-worked glass sits against a softly rounded brass backplate shaped like a smooth pebble. The glass keeps its natural bubbles and ripples, so when the lamp is on, light moves through it the way it moves through still water.Because each capsule is formed by hand, no two are quite alike in thickness, surface or the pattern of bubbles. A pair of small brass fasteners holds the glass in place and stays in view as part of the design. The gentle curve of the backplate reads softer than a squared plate, which makes it an easy fit beside a bed, along a hallway or in a living room. Mount one on its own or hang two as a pair.Details Materials: Brass backplate and fasteners, hand-worked glass capsule Dimensions: 25 cm (9.8") wide, 32 cm (12.6") high, 10 cm (3.9") deep Lamp base: E14, or E12 for North America Color temperature: Warm white, 2700K Installation: Hardwired wall mount Note: Bubbles, thickness and surface texture vary from piece to piece
A slab of natural crystal sits upright in a solid brass frame, and the lamp behind it shines straight through the stone. What you see when it is lit is the interior of the mineral itself: its banding, its clarity and the soft way it carries warm light.Every slab is cut by hand, so no two sconces look quite alike. The compact, vertical profile fits a narrow stretch of wall, a vanity mirror, a bedside or a hallway, and it looks its best mounted as a pair.Details Materials: natural hand-cut crystal and brass; each slab varies in clarity, banding and translucency Finish options: brass, black stainless steel or silver Dimensions: 10.2 in H x 6 in W x 5.5 in D (26 x 15.2 x 14 cm) Weight: approximately 2.8 to 3.5 kg Bulb: E12 base in North America, E14 in other markets; 2700K warm white recommended Installation: hardwired to a wall junction box; installation by an electrician Placement: for a vanity, mount one on each side of the mirror at roughly 60 to 65 in (152 to 165 cm), in a dry, protected position away from direct water and outside wet zones. Not waterproof. Also available: the same design in a triple configuration
A tall bell of clear hand-blown glass surrounds a slender solid brass frame, so the warm glow of a filament bulb stays fully on view. The upright metal structure gives the sconce a crisp architectural line, while the clear glass keeps it light and open. At the base, a small suspended glass sphere adds a quiet sculptural detail.Mounted in pairs, it frames a mirror, doorway or piece of art with real presence. It sits comfortably in modern, contemporary, industrial, art deco and transitional interiors. Because the glass is blown by hand, each shade carries slight variations of its own.Details Finish options: Brass or black (black version in stainless steel) Materials: Hand-blown clear glass, solid brass structure Dimensions: H59 × W19 × D18 cm Light output: 900 or 1200 lumens Voltage: 110V or 240V, configured for your region Installation: Hardwired Approximate weight: 2.8 to 3.8 kg Use: Indoor only
A carved half-dome of genuine alabaster sits within a slender brass frame, sending a soft wash of light both up the wall and down toward the surface below. As the light passes through the stone, its natural veining comes forward, giving each sconce a quiet, glowing character.Because alabaster is a natural material, the tone, veining and translucency vary from one shade to the next. The compact proportions suit a bedside, a hallway or either side of a vanity mirror, and a pair shows off the subtle differences between two stones especially well.Details Materials: Genuine alabaster shade, brass frame Alternate finish: Also available in black stainless steel Dimensions: 34 cm high x 10 cm wide x 11.5 cm deep (13.4 x 3.9 x 4.5 in) Weight: Approx. 2 kg Light source: E14 socket (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount Bathroom use: Standard version is intended for dry interiors; a bathroom version can be requested for vanity placements
A slim strip of natural alabaster is set into a narrow black stainless steel frame, and the dark surround makes the stone glow brighter when lit. The light spreads evenly from top to bottom, warm and soft, without a bright spot at the center.At just 7 cm (2.8") deep, the sconce sits close to the wall, so it works well in a hallway, beside a bed in place of a table lamp, or flanking a vanity mirror. Mounted in a series along a corridor, it starts to feel like part of the architecture. Because alabaster is a natural stone, the veining and translucency will vary from one piece to the next.Details Materials: Natural alabaster panel, black stainless steel body Dimensions: 50 cm (19.7") H x 12 cm (4.7") W x 7 cm (2.8") D Light source: Integrated LED, approximately 8W and 650 lumens Color temperature: 2700K warm white Installation: Hardwired wall mount Also available: Brass finish
Stacked squares of natural marble frame an opal diffuser in this wall sconce. Each layer steps a little farther from the wall than the one behind it, so light slips out through the gaps between the stone rather than from one opening, drawing a soft stepped pattern on the surrounding surface.Because every layer is cut from real stone, the veining shifts from one square to the next and no two fixtures look quite alike. Choose red, black or brown marble. It reads best where the shadow detail can be seen up close, such as beside a bed, along a hallway or in a living room.Details Material: Natural marble layers with an opal diffuser Stone options: Red, black or brown Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining varies between layers and between pieces
Smoky black glass sits within a dark stainless steel frame, giving this wall sconce a graphic, slightly moody presence. When lit, the tinted shade softens the bulb into a warm, low glow that feels intimate rather than bright.Its clean lines work comfortably in contemporary, mid-century and industrial interiors. Mount one beside a bed, use a pair to flank a mirror, or run a series along a hallway.Details Dimensions: H 32 cm × W 27 cm, projects 29 cm from the wall Materials: stainless steel frame, black glass shade Light source: E27 or E14 socket, warm LED bulb recommended (bulb not included) Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Weight: approx. 2 kg Indoor use only
A tall bell of clear, hand-blown glass hangs from a slender metal frame, with a small glass sphere suspended inside it. Because the bell is fully transparent, the lamp becomes part of the design, and a warm filament bulb gives the best result.Each bell is shaped by hand, so expect variation in wall thickness, tiny bubbles and subtle differences in form from one piece to the next. At nearly two feet tall, the sconce sits well along a hallway or stair wall, beside a doorway, or flanking a mirror. It looks especially good installed in pairs.Details Dimensions: 59 cm (23.2") high, 19 cm (7.5") wide, 18 cm (7.1") deep Materials: Hand-blown clear glass bell and inner sphere, metal frame Finishes: Black stainless steel or bronze Bulb: E14 socket (E12 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Weight: Approximately 2.8 to 3.8 kg (6 to 8 lb) Installation: Hardwired wall mount, indoor use
A slender brass bar rises from a round wall plate and ends in a carved alabaster dome, giving this sconce a clean vertical line that carries the eye upward and makes a wall feel taller. Because the dome is cut from natural stone, its veining and translucency vary from one piece to the next, and the light it gives off is warm and soft rather than stark white.Spaced evenly along a corridor, a series of these sets a steady rhythm. On its own, one sits well beside a doorway, a mirror or a headboard. For the dome to land near eye level, mount the wall plate roughly 120 to 130 cm (47 to 51 in) from the floor.Details Materials: Genuine alabaster and brass; also available in black stainless steel Height: 66 cm (26 in) Dome diameter: 11 cm (4.3 in) Projection from wall: about 10 to 12 cm (3.9 to 4.7 in) Weight: approximately 3.2 to 4 kg Light source: E14 socket (E12 for North America), warm white 2700K Installation: hardwired wall mount
A carved half-dome of natural alabaster sits within a slender black stainless steel frame, pairing the soft glow of stone with a crisp, dark outline. When lit, the shade casts light upward along the wall and downward onto the surface beneath, while the veining in the stone shows through in warm tones.Because alabaster is a natural material, each shade has its own veining, color and translucency. The sconce reads especially well in pairs, flanking a vanity mirror or a bed, and sits comfortably in a hallway or living room. For bedside use, center it roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: Hand-carved alabaster shade, black stainless steel frame Dimensions: 34 cm (13.4") H x 10 cm (3.9") W x 11.5 cm (4.5") D Weight: Approximately 2 kg (4.4 lb) Bulb type: E14 socket (E12 for North America) Recommended color temperature: Warm white, 2700K Installation: Hardwired; a standard wall box is sufficient Also available: The same design in brass
Ribbons of textured green glass curve and overlap around a brass frame, giving this sconce the presence of a small sculpture on the wall. Because each glass ribbon is shaped by hand, the layering and the intensity of the green vary slightly from one sconce to the next.With the lights off, it reads as a piece of colored glass. Switched on, the overlapping layers diffuse the two bulbs into a soft, jewel-toned glow. It suits a bedroom, a dressing room or a hallway, and a pair works well flanking a mirror where you want color instead of a neutral fixture.Details Materials: Textured green glass over a brass frame Width: 12 in (30.5 cm) Light source: Two E12 bulbs (E14 outside North America) Recommended bulbs: Warm white, 2700K, which keeps the green tones warm Installation: Hardwired wall mount Coordinating pieces: Also offered as a chandelier and a candelabra
A round brass backplate gives way to a pair of slender arms, and each arm holds a cone shade in fabric finished with a dark trim along its edge. The shades diffuse the bulbs into a warm, low glow that flatters faces and suits evening rooms.Mounted in pairs on either side of a bed, these sconces leave the nightstands clear for books and glasses. A single one also works well along a hallway, over a console with a mirror, above a sofa or on each side of a fireplace. For bedside use, aim to place the center roughly 140 to 152 cm (55 to 60 in) above the floor so the switch stays easy to reach. The two shaded lamps give enough light to read by.Details Materials: Brass and fabric Finishes: Brass or black Height: 54 cm (21.3 in) Width: 35 cm (13.8 in) Wall base: 14 cm (5.5 in) diameter Weight: Approx. 1.8 kg (4 lb) Bulbs: 2 × E14, or 2 × E12 in North America, about 6W each, warm white 2700K Dimming: Dimmable version available with compatible bulbs and an external dimmer Installation: Hardwired to a wall junction box by an electrician; a standard box carries the weight. A plug-in cord with an in-line switch is an available alternative. Use: Indoor dry locations only; not suited to bathrooms or outdoors