Living Room Lighting

A solid alabaster dome sits on a stepped stainless steel base finished in brushed bronze. The stone is natural and carries soft veining in warm neutral tones, so no two domes look quite the same. When lit, the warm glow brings that character forward.The tiered base reads as part of the design rather than a simple support, which makes the lamp well suited to a console, sideboard or living room surface where it can be seen in full.Details Shade: Solid natural alabaster dome Base: Tiered stainless steel, brushed bronze finish Width: 34 cm (13.4") Height: 39 cm (15.4") Light: Warm white, 2700K

A broad circle of solid brass carries a ring of tall candle-style lights, giving this chandelier the look of a lit candelabra suspended over the room. The antique brass finish is deeper and softer than polished brass, with a worn warmth that sits comfortably in a period home or a raw loft.The bare candle bulbs throw light outward and toward the ceiling, washing the surrounding space as well as the table below. It reads as ambient, candlelit glow rather than focused task light, so over a kitchen island it works best paired with other fixtures. Warm white bulbs at 2700K are key to the effect, matching the golden tone of the brass; cooler bulbs flatten it.Details Materials: Metal ring and candle sleeves; ring in solid brass Finish: Antique brass (gold) Models: 12, 18, 26 or 34 candles Sizing guide: 12 candles for a smaller round or square table; 18 for a mid-size dining table; 26 or 34 for a long table, large living room, double-height hall or loft Hanging height: Over a table, place the bottom of the ring 75 to 90 cm (30 to 35 in) above the surface Suspension: Rod with adjustable length, sized to your ceiling height Bulbs: E14 candle bulbs, one per candle (12, 18, 26 or 34 depending on model); warm white LED at 2700K recommended; bulbs not included Dimming: Available as an option Weight: About 11 kg (24 lb) to 45 kg (99 lb), depending on size Installation: Hardwired; an electrician should secure it to a ceiling joist or reinforced blocking Use: Indoors only CareTurn the fixture off and allow the bulbs to cool before cleaning. Wipe away dust with a soft, dry cloth. Avoid metal polish, as it will strip the antique patina.

A round brass backplate gives way to a pair of slender arms, and each arm holds a cone shade in fabric finished with a dark trim along its edge. The shades diffuse the bulbs into a warm, low glow that flatters faces and suits evening rooms.Mounted in pairs on either side of a bed, these sconces leave the nightstands clear for books and glasses. A single one also works well along a hallway, over a console with a mirror, above a sofa or on each side of a fireplace. For bedside use, aim to place the center roughly 140 to 152 cm (55 to 60 in) above the floor so the switch stays easy to reach. The two shaded lamps give enough light to read by.Details Materials: Brass and fabric Finishes: Brass or black Height: 54 cm (21.3 in) Width: 35 cm (13.8 in) Wall base: 14 cm (5.5 in) diameter Weight: Approx. 1.8 kg (4 lb) Bulbs: 2 × E14, or 2 × E12 in North America, about 6W each, warm white 2700K Dimming: Dimmable version available with compatible bulbs and an external dimmer Installation: Hardwired to a wall junction box by an electrician; a standard box carries the weight. A plug-in cord with an in-line switch is an available alternative. Use: Indoor dry locations only; not suited to bathrooms or outdoors

Two glass diffusers rise above a solid marble base, giving this lamp a calm, architectural presence. The stone anchors the design with weight and natural veining, while the glass softens the light into an even, ambient glow that suits a living room, bedroom or hotel lobby.The design comes in two heights: a tall floor version and a compact table version for a desk or nightstand. Every marble base is unique, so veining and tone will vary slightly from one lamp to the next.Details Versions: Floor lamp, H 155 cm (61 in); table lamp, H 55 cm (21.7 in) Materials: Natural marble base with glass diffusers Light: Two glass diffusers providing ambient illumination Color temperature: 2700K warm white Dimming: Standard version is not dimmable; a dimmable version can be requested Approximate weight: Floor lamp 10 to 15 kg; table lamp 5 to 7 kg Use: Dry indoor locations only Natural variation: Marble veining and tone differ on each piece

This chandelier is built from a dense cascade of amber glass teardrops, each one blown and shaped by hand, so the pieces vary slightly in length, curve and depth of color. Faceted crystal beads hang between the arches of a gold-finished iron frame and scatter the light into fine points, giving the fixture a layered, vintage character.The lamps sit within the cascade, so light travels through the amber and reflects between glass and crystal. The effect is a soft, honeyed ambient glow rather than task light. Amber responds strongly to color temperature: at 2700K it reads warm and golden, while cooler bulbs make it look brown and flat. Warm white lamps are essential to the design. Over a kitchen island, pair it with separate task lighting.Details Materials: hand-blown amber glass teardrops, faceted crystal beads, iron frame with gold finish 60 cm size: 23.6" diameter, 19.7" high, six lights, approx. 26 to 35 lb 80 cm size: 31.5" diameter, 23.6" high, eight lights, approx. 40 to 53 lb Light source: E14 sockets; use warm white LED bulbs at 2700K; bulbs not included Suspension: 23.6" chain as standard; the smaller size hangs about 43" from the ceiling and the larger about 47", suiting ceilings of roughly 8.5 to 9.5 ft over a dining table Custom chain: length can be set longer or shorter to suit higher ceilings and stairwells Installation: hardwired; should be secured by an electrician to a joist or reinforced blocking Sizing guide: the 60 cm size suits a table of about 39 to 55" or a smaller entry; the 80 cm size suits a table of about 55 to 71", a larger island or a living room Hanging height: over a table, place the bottom of the fixture 30 to 35" above the surface CareTurn the fixture off and allow the bulbs to cool before cleaning. Dust with a soft dry cloth or feather duster, steadying each teardrop with your free hand. For a deeper clean, wipe glass and crystal with a damp microfiber cloth lightly dampened with mild glass cleaner, applied to the cloth rather than sprayed on the fixture. Keep abrasive products away from the gold finish.

Shaped from amber-tinted blown glass, this small table lamp takes the form of a softly rippled mushroom, with a rounded cap rising from a gently waved base. Its proportions recall glass lighting of the 1970s, and the tinted glass casts a warm, honeyed glow when lit.Because every lamp is blown individually, no two are quite alike. The curve of the silhouette, the thickness of the glass and the depth of the amber shift slightly from one piece to the next. At this compact size it sits comfortably on a nightstand, shelf, console or bar cart, and it groups easily with books and objects without crowding them.Details Material: Amber-tinted blown glass throughout Dimensions: 25 cm (9.8") wide x 30 cm (11.8") high Recommended light: Warm white, 2700K, to keep the amber tone honey-colored rather than orange Variation: Shape, wall thickness and color depth vary slightly with each hand-blown piece

Overlapping petals of amber glass gather into a rounded cluster with an Art Deco feel, giving this chandelier real depth from every angle. The color is a rich honey tone, and because each petal was shaped while the glass was hot, no two share exactly the same curve, edge or surface. It pairs well with walnut, dark oak, leather, brass, and walls in deep green or terracotta, and it suits rooms meant to feel warm after dark.Light moves through the stacked petals and bounces between them, producing a soft ambient glow rather than a focused downlight. Amber gives the warmest and lowest output of the glass colors offered, so if this will be the main light over a table, choose lamps toward the brighter end of the range and consider the dimmable version for evenings. Over a kitchen island or desk, plan for separate task lighting. Warm white at 2700K brings out the honey tone; cooler lamps make the glass read brown and dull.Details Materials: amber glass petals on an iron frame in a gold finish, with a matching ceiling canopy Medium: 65 cm (25.6") wide x 65 cm (25.6") high, about 10 kg (22 lb) Large: 80 cm (31.5") wide x 80 cm (31.5") high, up to about 18 kg (40 lb) Suspension: standard 50 cm (19.7") rod; overall drop about 115 cm (45") for the Medium and 130 cm (51") for the Large Drop options: longer rod or chain for tall ceilings, stairwells and double-height rooms; sloped ceiling adapter available Lamping: sixteen E14 sockets; recommended 2700K warm white LED, about 2 to 3 W each (175 to 275 lumens), for a total of 2,800 to 4,400 lumens Bulbs: not included Dimming: dimmable version available Installation: hardwired; an electrician should secure it to a joist or reinforced blocking, not a standard ceiling box Sizing guide: Medium fits tables of roughly 110 to 150 cm (43 to 59") or rooms near 3.5 x 4 m (12 x 13 ft); Large fits tables of 150 cm (59") or more, larger living rooms, entry halls and stairwells Hanging height: over a table, set the bottom 75 to 90 cm (30 to 35") above the surface; with the standard rod this works for ceilings of about 2.7 to 2.9 m (9 to 9.5 ft) Other options: alternate metal finishes; also offered in pink, clear and green glass CareTurn the fixture off and wait until the lamps are cool. Remove dust with a soft dry cloth or feather duster, steadying each petal with your free hand as you go. For heavier cleaning, put a small amount of gentle glass cleaner on a damp microfiber cloth and wipe the glass; do not spray anything directly on the chandelier. Avoid abrasives on the gold finish.

A tall floor lamp with a slender aged-brass column, a broad round base and a dome of amber crackle glass. The fractured texture of the glass catches the light from the two lamps inside, scattering warm reflections across the shade and giving the room a soft, honeyed glow.Its compact footprint sits comfortably beside a sofa, a reading chair or a console. The amber tone pairs naturally with walnut and other dark woods, marble, travertine, leather and warm neutral palettes, and the clean Art Deco and mid-century lines suit both homes and hospitality interiors.Details Dimensions: H 130 x W 35 x D 35 cm (H 51.2 x W 13.8 x D 13.8 in) Materials: Amber crackle glass dome with brass stem, shade rim and circular base Finish: Aged brass Light source: 2 x E27 sockets, supplied as E26 for North America Format: Freestanding floor lamp for ambient and decorative light Use: Dry indoor locations only Style: Art Deco, mid-century modern

Layered brass leaves circle a frosted glass diffuser to form a softly glowing crown, finished at the edge with a twisted rope border. The fixture sits close to the ceiling, which suits bedrooms, entryways and living rooms where a hanging chandelier would crowd the room but plain lighting would feel too spare.Two finishes are offered. Antique silver has a cool, aged character, while antique gold adds warmth. Each is applied by hand, so the depth of the patina differs slightly from one fixture to the next.Details Type: Semi-flush ceiling light Materials: Brass leaves, frosted glass diffuser, twisted rope border Finishes: Antique Silver, Antique Gold Width: 52.7 cm (20.75 in) Height: 22.2 cm (8.75 in) Canopy: 14.6 cm (5.75 in) Bulbs: 4 x E12, warm white 2700K recommended Installation: Hardwired, indoor use

A ring of layered brass leaves forms the crown of this chandelier, suspended from sculptural chains and finished with a twisted rope edge. Beneath the foliage, an acrylic diffuser spreads a soft, even glow across the room.The leaves are shaped and finished by hand in antique gold, so the patina deepens in some places and lightens in others. No two crowns look quite the same. Its proportions sit comfortably over a dining table of roughly 140 to 180 cm (55 to 71") or above a living room seating arrangement.Details Materials: Brass leaves with twisted rope edge, acrylic diffuser Finish: Hand-applied antique gold, with natural variation in patina Width: 93.3 cm (36.75") Height: 75.6 cm (29.75") Bulbs: 9 x E12 Color temperature: Warm white, 2700K Installation: Hardwired, for indoor use Placement: Over a table, hang the lowest point 75 to 90 cm (30 to 35") above the surface Also available: The same leaf crown in a semi-flush version

Hand-cut slabs of alabaster are stacked in stepped tiers to form this wall sconce, with two light sources tucked inside. As the light passes through, the stone glows from within, and the steps send illumination both upward and downward. The seams between slabs show as fine lines, giving the face a quiet architectural rhythm.Every slab has its own veining, so a single fixture displays several distinct patterns of stone side by side. This is the wider of two versions of the design, sized well for a living room, dining room or entry. Hung in a pair beside a doorway or mirror, it creates balance while each piece keeps its own natural character.Details Material: Hand-cut alabaster in stepped layers Dimensions: 28 cm (11 in) high x 26 cm (10.2 in) wide Light source: Two, warm white at 2700K Light direction: Upward and downward Mounting: Hardwired wall mount Also available: A compact version of the same design

Three hand-carved alabaster orbs circle a solid brass mast, each set off-center on its own axis so the chandelier reads like a slowly turning model of the planets. Because every orb is shaped from a single block of Spanish alabaster, no two share the same veining, and when lit they glow softly and evenly from within.The light it gives is gentle and all-around, with no hard shadows, which makes it ideal ambient light for tall rooms such as a stairwell, a double-height entry or a high-ceilinged library. Seen from below and from the side on a staircase, it shows at its best. In a library, pair it with a desk or reading lamp for close work.Warm light is essential to the look. At 2700K the stone turns honey and cream, with amber and gray drifts running through it. Cooler lamps flatten it to a dull gray-white, so we recommend warm white only.Details Materials: Hand-carved Spanish alabaster orbs; heavy-walled solid brass mast and frame with reinforced joints Construction: Internally counterweighted frame so the asymmetric arrangement hangs level Dimensions: 74.5 cm (29.3 in) W x 75.5 cm (29.7 in) D x 138 cm (54.3 in) H overall Suspension: Length made longer or shorter to order to suit your ceiling height Lamping: Nine G9 LED lamps housed inside the orbs; warm white 2700K recommended Weight: About 16.5 kg (36 lb) Installation: Hardwired, indoor use; secure to a ceiling joist or reinforced blocking by a qualified electrician Placement over a table: For a round table of about 120 to 160 cm (47 to 63 in), hang the lowest orb 75 to 90 cm (30 to 35 in) above the surface, which calls for a ceiling of roughly 3 m (10 ft) or higher CareTurn the fixture off and allow the lamps to cool before cleaning. Alabaster is soft and porous, so dust the orbs only with a soft dry cloth or feather duster, never with water, sprays or cleaning products. Wipe the brass with a dry soft cloth and avoid metal polish.

A ring of brass holds a row of upright alabaster cylinders, each standing 16 cm (6.3") tall. Every cylinder is cut and polished on its own, so the clouding, veining and depth of translucency differ around the circle and from one chandelier to another. With the lamps off, the stone reads as calm and matte. Switched on, light moves through the walls of each cylinder and the veins come into view.The rod and chain are wrapped in brass, carrying the tone of the frame all the way to the ceiling. Because the glow passes through stone, the effect is soft ambient light with a gentle rhythm set by the cylinders. Over a kitchen island or a desk, pair it with focused task lighting. Warm 2700K lamps keep the alabaster a honeyed ivory; cooler light tends to make it look gray and flat.Details Materials: alabaster cylinders on a brass frame, with brass-wrapped rod and chain Diameters: 50 cm (19.7"), 60 cm (23.6"), 80 cm (31.5"), 100 cm (39.4") Cylinder height: 16 cm (6.3") Minimum overall height: 43 cm (16.9"), suited to lower ceilings Chain: 40 cm (15.7") included Light source: G4 LED lamps, warm white 2700K Approximate weight: 14 to 18 kg (31 to 40 lb) for 50 cm; 18 to 22 kg (40 to 49 lb) for 60 cm; 25 to 32 kg (55 to 71 lb) for 80 cm; 34 to 42 kg (75 to 93 lb) for 100 cm Installation: hardwired; an electrician should secure it to a ceiling joist or reinforced blocking Sizing guide: 50 cm for round tables of roughly 90 to 120 cm (35 to 47") or a compact room; 60 cm for tables of 110 to 140 cm (43 to 55") or a room near 3 × 3.5 m (10 × 11.5 ft); 80 cm for tables of 140 to 180 cm (55 to 71") or a room near 4 × 4.5 m (13 × 15 ft); 100 cm for tables 180 cm (71") and longer, a generous living room or an entry hall Hanging height: over a table, set the lowest point 75 to 90 cm (30 to 35") above the tabletop CareTurn the fixture off and wait for the lamps to cool before cleaning. Use only a soft, dry cloth on the stone. Alabaster is soft and absorbent, so never let water or any cleaning product touch it. The brass also needs nothing more than a dry cloth; skip metal polish.

The Pantheon table lamp draws on the bold geometry of the 1970s, pairing a slim black metal base with a broad pleated shade. This version carries a shade of naturally veined alabaster, so each lamp shows its own pattern in the stone, and the light it gives off in the evening is soft and warm.It sits comfortably on a console, a nightstand or a side table in the living room. A matching floor lamp shares the same design, which makes it easy to use the two together in one room.Details Model: Original with marble lampshade Shade: Pleated natural alabaster with unique veining Base: Black metal Diameter: 30 cm (11.8") Height: 60 cm (23.6") Color temperature: Warm white, 2700K

Two thin panels of natural stone meet at an angle along a slim brass spine, forming a shallow fold on the wall. The light source sits behind the stone, so the glow washes back onto the surface around it while the panels themselves take on a soft, backlit warmth.The stone is onyx-veined, with beige and cream banding that varies from one lamp to the next. The pattern is most visible along the seam where the two panels join. Mounted against plaster, limewash or microcement, it gives a hallway, entry, living room or reading nook a gentle ambient light rather than a bright point of glare.Details Materials: Natural onyx-veined stone panels, brass spine Dimensions: 35 cm (13.8") high, 15 cm (5.9") wide, 10 cm (3.9") deep Light source: Integrated LED, warm white 2700K Light direction: Indirect, cast behind the stone panels toward the wall Installation: Hardwired wall mount Stone character: Veining and color vary naturally with each piece

Stacked, softly rounded forms of alabaster climb upward into a slender glowing column, giving this floor lamp the calm, monumental feel of a carved stone marker. Switched on, the stone shows its inner life: clouds, veins and mineral traces warm into view, and no two lamps share the same pattern of light.At 170 cm tall and just 28 cm across, it takes up very little floor area. It fits neatly into a bedroom corner, beside a console or in an entryway where a broader lamp would crowd the room. The column rests on a black marble base.Details Dimensions: Ø28 × H170 cm (11 × 66.9 in) Materials: Natural alabaster with a black marble base Natural variation: Color, veining, translucency and mineral markings differ with each piece Weight: Approximately 55 to 65 kg Light source: Integrated LED Color temperature: 2700K warm white Dimming: Standard version is not dimmable Voltage: 110 to 240V, configured for the destination Use: Dry indoor settings only CareBecause of its considerable weight, settle the lamp in its final spot before you finish arranging the room, and avoid shifting it often.

A broad fabric diffuser printed with a botanical motif rests on a sculpted stainless steel base. Switched off, the shade reads as a clean white panel. Once lit, the pattern comes forward and the lamp becomes a glowing surface.Each diffuser is shaped by hand over its frame, so the placement of the pattern varies slightly from one lamp to the next. Its width suits a console, a sideboard or a roomy nightstand. A darker colourway is also offered.Details Color: White Diffuser: Fabric with botanical pattern, visible when lit, hand-shaped over the frame Base: Sculptural stainless steel Dimensions: 16.5" (42 cm) wide x 24.4" (62 cm) high Light: Warm white, 2700K

A broad fabric diffuser printed with a botanical pattern sits on a sculptural stainless steel base. By day the shade reads as a quiet, soft blue form. Once the lamp is switched on, the printed pattern comes forward and the shade becomes a glowing panel.Each diffuser is shaped by hand over its frame, so the pattern settles a little differently on every lamp. Its width suits a console, a sideboard or a generous bedside table, where there is room for the shade to be seen in full. Warm white light at 2700K keeps the print rich instead of flat.Details Colorway: Blue Base: Sculptural stainless steel Diffuser: Fabric with printed botanical pattern, hand-shaped over the frame Height: 62 cm (24.4 in) Width: 42 cm (16.5 in) Light: Warm white, 2700K

Two folded panels sit within a curved frame of brushed brass, and the metal traces the bend of each one so the pendant reads from the side as a single sculpted fold. The upper panel is a printed botanical textile in a white colorway. Below it, a plain white panel holds the light, diffusing it evenly and keeping the source out of sight.By day the pattern does the talking. After dark the lower panel glows warmly, and because the LED is concealed there is no glare when you look up from a dining chair or across the room. Sized at 75 cm wide, it works well over a dining table of roughly 150 to 200 cm (59 to 79"), above a reading corner or in an entry.Details Materials: brushed brass frame, printed botanical fabric upper panel, white diffusing lower panel Color: white (also offered in blue) Width: 75 cm (29.5") Shade: 45 cm (17.7") Overall height: 120 cm (47.2") standard; rod can be made shorter or longer to order Light source: integrated LED, 900 to 1,200 lumens, no bulbs required Canopy: round ceiling plate, 12 cm (4.7") diameter Weight: approximately 5 to 8 kg (11 to 18 lb) Installation: hardwired to a ceiling junction box; have an electrician confirm the ceiling can support the fixture Hanging guide: over a table, set the lower edge 75 to 90 cm (30 to 35") above the surface; the standard height suits ceilings of about 2.7 to 2.9 m (9 to 9.5 ft) Use: dry indoor rooms only CareDust the brass and fabric with a dry microfiber cloth or soft brush. Keep water and cleaning products away from the fabric panel.

Tiers of white glass ovals open around a central hub like petals, each one rippled with a wave texture that catches light whether the fixture is lit or dark. The layering gives the chandelier real depth and diffuses the lamps behind it, so the room receives a broad, even, glare-free glow rather than a focused downlight.The frame and canopy are polished solid brass, and a fabric-wrapped suspension softens the line to the ceiling. Lit at a warm 2700K, the glass reads as a soft warm white and the brass looks deep and rich. Cooler lamps would turn the glass bluish and flatten the metal, so warm white is intended as part of the design. It suits a large dining room, living room, foyer or hotel lobby.Details Small: 115 cm (45.3 in) diameter, 90 cm (35.4 in) high, approx. 28 to 34 kg (62 to 75 lb) Large: 130 cm (51.2 in) diameter, 90 cm (35.4 in) high, approx. 34 to 42 kg (75 to 93 lb) Materials: wave-textured white glass ovals; polished solid brass frame and canopy Suspension: fabric-wrapped, adjustable, and made to length for your ceiling height Light source: G9 LED lamps, about 3 to 5 W each, warm white 2700K Installation: hardwired; should be fixed to a joist or reinforced blocking by an electrician Sizing guide: Small for a table seating eight to ten (about 200 to 240 cm, 79 to 94 in) or a large living room; Large for tables of 240 cm (94 in) and longer or a double-height entry Hanging height: 75 to 90 cm (30 to 35 in) above a table; about 240 to 260 cm (7.9 to 8.5 ft) from floor to fixture bottom in open areas. Its 90 cm height calls for a generous ceiling. Gives ambient light; add task lighting over a table used for work CareTurn the fixture off and allow the lamps to cool first. Dust the glass with a soft dry cloth or feather duster, and for a deeper clean wipe it with a damp microfiber cloth, then dry. Dust the brass with a soft dry cloth and avoid polish.

This pendant lantern pairs handmade Japanese washi paper with fine bamboo ribs, giving it a gently segmented silhouette that reads as both traditional and quietly modern. Lit, the paper softens the light into an even, warm glow that settles nicely over a dining table or brings calm to a living room or bedroom.Because the paper is made by hand, its texture and fiber pattern vary slightly from shade to shade, so no two lanterns look exactly alike. It sits comfortably in Japandi, wabi-sabi and minimalist rooms.Details Dimensions: Ø88 cm × H35 cm Materials: Handmade Japanese washi paper, bamboo, iron Light output: 800 lumens Color temperature: Warm 3000K or cool 6000K Voltage: 110V or 240V, configured for your region Installation: Ceiling mounted, hardwired Weight: Approximately 3 kg Finish note: Handmade paper varies naturally, making each piece unique

This floor lamp takes an organic, branching shape and renders it in fiberglass with a dark, textured finish. It stands nearly six and a quarter feet tall, reading as sculpture first and lighting second, and its surface catches shadow in a way that gives it real weight in the room.Because of its height and spread, it wants open wall or ceiling space around it. A generous entry, a large living room or a studio interior will let the form breathe. Fiberglass keeps it far lighter than it looks, at roughly 9 kg, so repositioning it is manageable.Details Dimensions: 190 cm (74.8 in) high, 70 cm (27.6 in) diameter Material: fiberglass with a dark textured finish Weight: approximately 9 kg Light: warm ambient glow; the product data lists an integrated LED at around 1,200 lumens, though the exact light source is not fully confirmed Color temperature: warm white (source data cites both 2700K and 3000K) Voltage: 110V or 240V, configured for your region Dimming: dimmable with a suitable dimmer Use: dry indoor locations only

This floor lamp draws on the bold geometry of the 1970s, pairing a slim black metal base with a broad pleated shade. The selected model carries a shade of natural alabaster, a genuine stone whose veining is unique to each piece. Lit in the evening, it gives off a soft, warm glow.The wide shade sends light downward rather than out into the room, so it sits well beside a sofa or reading chair in a living room, bedroom or home office. Allow enough clearance around the upper section for the shade's generous diameter.Details Model: Original with marble-look alabaster lampshade Base: Black metal (iron) Shade: Pleated natural alabaster; veining varies from piece to piece Height: 165 cm (64.9 in) Shade diameter: 50 cm (19.6 in) Cable length: 150 cm Weight: Approximately 14 kg with alabaster shade Bulb: E27 socket (E26 for North America); warm white 2700K recommended; bulb not included Voltage: 110 to 240V, configured for your region Use: Dry indoor locations only Shade material and finish are specified before production

Three rings of translucent alabaster hang one beneath the other, each smaller than the last and set at its own height, so the circles appear to drift in the air on slender stainless-steel cables. An LED hidden inside every ring lights the stone from within. The rings themselves become the light, and the natural clouding and veining of the alabaster show all the way around each circle. Because this is real stone, no two rings look alike, and you can choose a heavier, lighter or random veining pattern.The warm 2700K light suits alabaster especially well, drawing out honey and cream tones with soft amber and gray drifts through the stone. The result is a gentle, layered ambient glow with no exposed lamps. Over a kitchen island or work surface, pair it with dedicated task lighting. It is scaled for generous dining rooms, double-height living spaces, entrance halls, stairwells and hospitality interiors.Details Material: Spanish alabaster rings on stainless-steel suspension cables Canopy: Gold (solid brass) or Black (stainless steel with black finish) Small: rings of 100 / 60 / 30 cm (39.4" / 23.6" / 11.8"), about 75 W, about 16 kg (35 lb) Medium: rings of 120 / 80 / 40 cm (47.2" / 31.5" / 15.7"), about 120 W, about 25 kg (55 lb) Large: rings of 150 / 100 / 50 cm (59" / 39.4" / 19.7"), about 180 W, about 40 kg (88 lb) Ring height: 7 cm (2.8") each Light source: integrated LED, 2700K warm white, replaceable LED strips Installation: hardwired; an electrician should secure it to a joist or reinforced blocking, not a standard ceiling box Sizing guidance Small suits a table of roughly 180 to 240 cm (71 to 94") or a large living room Medium suits a table of 240 cm (94") or longer, or a double-height living room Large is intended for entrance halls, stairwells and expansive open rooms Above a table, position the bottom ring 75 to 90 cm (30 to 35") over the surface; at the full drop this works with ceilings of about 3.4 to 3.6 m (11 to 12 ft) CareTurn the fixture off and give it time to cool before cleaning. Alabaster is soft and porous, so keep moisture and products away from it entirely and remove dust with a dry, soft cloth or feather duster. Treat the metal parts the same way, using only a dry cloth and no polish.