Entryway and Staircase Lighting
Statement fixtures for foyers, double-height entries and staircases.
A softly rounded shade of cream glass sits on brass hardware, its surface pressed with fine vertical ribs. Because the ribbing is molded into the glass itself, the shade has texture and depth even when the light is off. Once lit, the ribs spread the light gently, and the cream tone gives it a warm, mellow glow instead of a stark white one.At just over five inches deep, the sconce sits close to the wall, which makes it a comfortable choice for hallways and other narrow spaces. Mounted in a pair on either side of a mirror, it casts even, flattering light for a vanity, powder room or bedroom.Details Shade: Ribbed cream glass Hardware: Brass Dimensions: 9" H x 9" W x 5.13" D (22.9 x 22.9 x 13 cm) Light source: One E12 bulb (E14 outside North America) Recommended bulb: Warm white, 2700K Installation: Hardwired wall mount
This floor lamp is a single broad sweep of matte black resin that curves over at the top to hold its light within the form itself. The result reads more like sculpture than fixture, quiet and solid, with light cast downward in a soft warm pool.At nearly six feet tall and just over three feet wide, it asks for open floor around it. It works best in an entry, a loft or a generous living room, with the projecting curve kept clear of walkways. Each body is finished by hand, so expect slight variation in shape, patina and texture from one lamp to the next.Details Dimensions: W 95 × H 182 cm (37.4 × 71.7 in) Material: Hand-finished resin with a matte black surface (not stone or metal) Weight: Approximately 12 to 18 kg Bulb: 1 × E26/E27 Light: Directed downward, 2700K warm white by default Use: Dry indoor locations only
Ribbed panels of natural alabaster are stacked within an iron frame, forming a compact sconce with real depth. Unlit, the fins read as carved stone. Lit, warm light slips through the gaps between them and casts a striped vertical glow across the wall.Because every fin is cut from natural stone, the veining and translucency shift along the stack and differ from one sconce to the next. The shallow footprint works well in a hallway, beside a bed, or as a pair flanking a vanity mirror, where the ribbed surface offers more texture than a flat shade.Details Materials: Natural alabaster panels, iron frame Dimensions: 25 cm (9.8") wide, 22 cm (8.7") high, 18 cm (7.1") deep Weight: Approximately 3 to 4.5 kg (7 to 10 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount
This floor lamp reads as glass sculpture first. Blown glass rods are flame-worked into an open mesh, then sealed in a clear polymer skin that both protects the structure and softens the light as it passes through. Because each rod is shaped and set by hand, the pattern of the mesh varies from piece to piece, and so do the shadows it casts.This is the single-column version. It wants open floor space where it can be seen from several sides.Details Dimensions: 72 in (182.9 cm) high, 31 in (78.7 cm) wide, 17 in (43.2 cm) deep Materials: Flame-worked blown glass rods with a clear polymer skin Weight: Approximately 10 kg (22 lb) Light source: Integrated LED, warm white 2700K Dimming: Adjustable brightness Mounting: Freestanding or ceiling suspended; ceiling hardware not included Use: Dry indoor locations only
Four plaster blades, each shaped and finished by hand, are gathered along a slender brass stem to form a sculptural chandelier with real presence. With four blades rather than three, the form feels closed and full, so it looks complete from any angle in the room. Because every blade is worked individually, expect gentle variation in curve, surface and tone from one piece to the next.This is the larger configuration, well suited to a dining table of roughly 160 to 200 cm (63 to 79"), a living room, or an entry with generous ceiling height. A more compact three-blade version suits round tables and kitchen islands.Details Materials: Hand-formed plaster blades on a brass stem Dimensions: 75 cm (29.5") W x 50 cm (19.7") D x 55 cm (21.7") H Suspension: 30 cm (11.8") rod as standard; custom rod lengths available at order Weight: Approximately 8 to 12 kg (18 to 26 lb) Lamping: E27 sockets (E26 for North America), warm white 2700K
A carved alabaster egg sits against a broad brass backplate in this wall sconce. When lit, the metal throws light back across the wall behind the stone, giving the glow a layered, dimensional quality instead of a flat wash.Because the alabaster is natural stone, each egg carries its own veining, color and degree of translucency. The sconce is generously scaled and reads well on its own, on a bedroom wall, in an entry, in a dining room or next to a bathroom mirror. For comfortable placement, set the center roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: natural carved alabaster, brass backplate Height and width: 37 cm (14.6") Projection from wall: 15 to 17 cm (6 to 6.7") Weight: approximately 3 to 4.2 kg (7 to 9 lb) Light source: integrated LED, 2700K warm white Output: approximately 300 to 450 lumens Voltage: 110 to 240V Installation: hardwired, wall mounted Note: stone veining and color vary from one piece to the next
This wall light is built around a solid copper body, finished with turned wood details and a soft cloth shade. Because the copper is real rather than plated, it will deepen and darken over time, and the wood and cloth settle into their own patina alongside it. The result is a fixture that grows warmer in character the longer it hangs.A single sconce sits comfortably beside a bed, over a reading chair or along a corridor, with a choice of emerald or grey shade. The three-part version spreads light across a broader stretch of living room wall, while the five-part composition has the presence to carry a stair wall or long hallway by itself.Details Materials: Solid copper body, turned wood details, cloth shade Configurations: Single with emerald shade, single with grey shade, three-part, five-part Light: Warm white, 2700K, approximately 800 lumens Voltage: 110 to 240V, matched to the destination Weight: Approximately 3 kg (6.6 lb) Installation: Wall mounted, hardwired
This tiered chandelier gathers carved alabaster teardrops into concentric rings suspended from a solid brass frame. The longest drops circle the outer edge, and each ring below steps inward and shortens, finishing with the smallest drops at the center. Unlit, it has the presence of sculpted stone. Lit, each drop glows through its own thickness and the layers resemble water caught mid-fall.Because the lamps sit among the teardrops, light filters through several layers of stone before reaching the room. The result is soft and diffused, closer to candlelight than to a focused downlight, so plan separate task lighting over a kitchen island or desk. Warm white matters here: at 2700K the alabaster turns honey and cream with amber and gray veining, while cooler light flattens it to a dull gray-white.Details Sizes: Ø55cm x H43cm (21.7" x 16.9"), 4 tiers, 6 lights; Ø80cm x H55cm (31.5" x 21.7"), 6 tiers, 14 lights; Ø100cm x H62cm (39.4" x 24.4"), 7 tiers, 20 lights Shade material: Spanish alabaster teardrops, selected for softer veining; softer, stronger or random veining may be specified Frame: Solid brass frame, chain and hardware; chrome or black stainless steel available as alternatives Overall drop with standard chain: about 73 cm (29") for the 55 cm, 85 cm (33") for the 80 cm, 92 cm (36") for the 100 cm, suiting dining ceilings of roughly 2.3 to 2.6 m (7.5 to 8.5 ft) Bulbs: 6, 14 or 20 E12 or E14 candelabra lamps depending on size; 2700K warm white LED recommended; bulbs not included Weight: about 10 kg (22 lb), 20 kg (44 lb) and 35 kg (77 lb) respectively Installation: Hardwired; the two larger sizes should be secured by an electrician to a joist or reinforced blocking instead of a standard ceiling box Table sizing: 55 cm for round tables about 90 to 120 cm (35 to 47"), bedrooms, dressing rooms or powder rooms; 80 cm for tables about 130 to 170 cm (51 to 67") or an entry; 100 cm for tables about 170 to 220 cm (67 to 87") seating ten or more, or a large entry Hanging height: Keep the lowest point 75 to 90 cm (30 to 35") above the tabletop CareTurn the fixture off and allow the bulbs to cool before cleaning. Alabaster is soft and absorbent, so clean it only with a dry soft cloth or feather duster and never apply liquids or cleaning products. The brass needs nothing more than a gentle dry wipe; avoid polishes.
Two rings of hand-cut Spanish alabaster float one above the other, the larger on top and the smaller set roughly 40 cm (15.7") below. Each ring carries an LED inside it, so the stone itself becomes the light. As with any natural stone, the two rings will differ slightly.The light is integrated warm white at 2700K, which brings out honey and cream tones in the alabaster and lets the veining read as soft amber and gray. The glow spreads outward and downward with no visible lamps, giving even ambient light over a dining table, kitchen island, bedroom, living room or entry. For close work at an island or desk, pair it with task lighting.Details Small: rings of 80 cm (31.5") and 50 cm (19.7"), about 2,200 lumens, about 12 kg (26 lb) Large: rings of 100 cm (39.4") and 60 cm (23.6"), about 3,000 lumens, about 18 kg (40 lb) Ring height: 7 cm (2.8") each Material: solid Spanish alabaster, cut by hand Finishes: Gold, with a solid brass canopy, or Black, with a black-finished stainless steel canopy Suspension: fine stainless steel cables from a single canopy Light source: integrated LED, 2700K warm white, replaceable LED strips Installation: hardwired. Have an electrician secure it to a joist or reinforced blocking, not a standard ceiling box. Sizing guide: Small suits a table of about 150 to 200 cm (59 to 79") or a room near 4 × 5 m (13 × 16 ft). Large suits a table of about 220 to 300 cm (87 to 118") seating ten to twelve, or a double-height living room or entry. Hanging height: over a table, set the lower ring 75 to 90 cm (30 to 35") above the surface. At the full drop, this fits ceilings of about 3.1 to 3.3 m (10 to 11 ft). CareTurn the fixture off and let it cool before cleaning. Alabaster is soft and porous, so dust it only with a soft dry cloth or feather duster, and keep water, sprays and cleaners away from it. Wipe the metal with a dry cloth and do not use polish.
Two hand-carved alabaster domes sit at either end of a U-shaped arm of solid brass, one facing up the wall and one facing down. The result is an even, softly balanced light that washes the surface in both directions instead of throwing a beam one way.Because each dome is cut from natural stone, the veining is unique to every piece, and the two domes on a single fixture will differ from one another. The arm can be ordered extending to the left or the right, which lets you mirror a pair on either side of a bed, a doorway or a mirror.Details Materials: Solid brass arm with natural carved alabaster domes Dimensions: 31 cm (12.2") wide by 37.8 cm (14.9") high Orientation: Left or right arm Light source: Two E14 lamps (E12 for North America), warm white 2700K recommended Installation: Hardwired; suitable for straight or sloped walls Suggested mounting: Center about 150 to 160 cm (59 to 63") from the floor when placed beside a bed Alternate finish: Also available in black stainless steel
Two crystal shades sit side by side on a solid brass frame, giving this sconce a low, wide profile that casts light outward across the wall instead of pooling it above or below. That lateral glow is especially flattering over a mirror, where it lights the face evenly.Hang it above a bathroom mirror or set a pair at eye level on either side. It also suits bedroom and hallway walls where a broad, compact fixture fits the proportions better than a tall one.Details Materials: Crystal shades, solid brass frame Width: 32 cm (12.6") Height: 19.2 cm (7.6") Weight: Approximately 2.4 to 3 kg (5 to 7 lb) Light source: Two E14 bulbs (E12 for North America) Recommended color temperature: 2700K warm white Installation: Hardwired; intended for a dry, sheltered spot, including beside a vanity
Two carved alabaster domes sit on a U-shaped arm of black stainless steel, one casting light upward along the wall and the other washing it downward. The result is a balanced, symmetrical glow rather than a single directed beam, with the dark metal framing the pale stone in a way that suits Art Deco and Hollywood Regency rooms alike.Because each dome is natural stone, its veining, color and translucency are unique, and the two shades on a single fixture will differ slightly from one another. The arm is offered in left and right versions, so two sconces can mirror each other on opposite sides of a bed, vanity or doorway. Beside a bed, a center height of roughly 150 to 160 cm (59 to 63") from the floor works well.Details Materials: Natural alabaster domes, black stainless steel arm Width: 31 cm (12.2") Height: 37.8 cm (14.9") Weight: Approximately 3.5 to 4.8 kg (8 to 11 lb) Orientation: Left or right Light source: Two E14 bulbs (E12 in North America), warm white 2700K Installation: Hardwired; can be fitted to straight or sloped walls
Two alabaster globes sit side by side on a slender brass arm, each one lit from within so the stone takes on a soft, moonlike glow and casts its own pool of light across the wall. The globes are turned from natural stone, which means the cream and honey veining shifts from one globe to the other and no two fixtures look quite alike.With a shallow projection of just under six inches, it stays comfortably clear of passing shoulders in a hallway or entry. The pair of globes offers more light and a fuller presence than a single shade, and it sits well beside a vanity mirror when mounted at face height.Details Materials: genuine alabaster globes with brass arm and backplate; veining varies naturally Dimensions: 20 cm (7.9 in) H x 15 cm (5.9 in) D Globes: two, each 10 cm (3.9 in) in diameter Backplate: 12 cm (4.7 in) Light source: two G9 bulbs, approximately 1,000 lumens total at 2700K warm white Installation: hardwired to a wall junction box by an electrician; a plug-in version may be requested where the design allows Bathroom use: suitable beside a vanity away from direct water; follow local bathroom electrical-zone rules. Not intended for outdoor use Weight: approximately 2 kg
A soft white half-dome shade sits atop a slender brass stem, which rises from a solid cylindrical marble base. The shade is set off-center, and the weight of the stone holds the lamp steady beneath it.Because the dome faces sideways and down, the light falls across the tabletop instead of washing up toward the ceiling. That makes it well suited to a nightstand, an entry console or a side table in the living room. The marble is natural stone, so the veining on each base is unique.Details Shade: White half-dome Stem: Brass Base: Cylindrical natural marble, with veining that varies from piece to piece Dimensions: 30 cm (11.8 in) wide x 45 cm (17.7 in) high Light: Warm white, 2700K
A carved dome of natural alabaster sits within a stainless steel mount, sending a soft wash of light down the wall while the stone itself glows along its edge. The warm 2700K light brings out the veining and depth of the alabaster.Because the stone is natural, each dome has its own pattern of veins and its own degree of translucency. At 35 cm across, this sconce reads best as a single fixture on a wall. It suits a living room, a bedroom, a stair landing or an entry, and it does not need a matching partner beside it.Details Dimensions: 38.5 cm (15.2 in) H × 35 cm (13.8 in) W × 18 cm (7.1 in) D Projection from wall: 18 cm (7.1 in) Materials: Genuine alabaster with stainless steel; veining and translucency vary by piece Light source: G4 bulb, 2700K warm white Dimming: Not dimmable Weight: Approximately 3 to 4.5 kg Installation: Hardwired to a wall junction box; installation by a licensed electrician is recommended Placement: Mount with the center roughly 152 to 168 cm (60 to 66 in) above the floor, leaving open wall below for the downlight Use: Indoor use only
A single globe of natural alabaster hangs from a slim dark stainless steel stem on this wall sconce. A rectangular backplate and narrow rods give the frame a crisp, tailored outline, while the stone below brings a soft, diffused glow.Because each globe is turned from real stone, the veining is unique to every piece and becomes most visible once the light is on. The tall, narrow profile sits comfortably beside a vanity mirror, along a hallway or next to a bed, and the black finish reads clearly against lighter walls.Details Materials: Natural alabaster globe, stainless steel frame Finish: Black Dimensions: 36 cm (14.2") high x 15 cm (5.9") wide Color temperature: Warm white, 2700K Installation: Hardwired wall mount
A wide, shallow dome of brass suspended on slim rods, this pendant relies on its outline and the warm gold of the metal rather than any added ornament. The surface is left plain and the rim finished cleanly, so the fixture reads as a single calm disc above the table.The lamps sit tucked inside the saucer and point downward. The brass conceals them from view, sending an even pool of light onto the surface below while a gentle glow gathers at the edge. Its low profile keeps views open across a dining room, kitchen or entry. In a large open-plan space, it works best alongside softer ambient lighting elsewhere.Details Material: Brass with a plain, warm gold surface Diameter options: 45 cm (17.7"), 60 cm (23.6"), 75 cm (29.5") Saucer depth: 15 cm (5.9") Overall drop: About 80 cm (31.5") from the ceiling Suspension: Rods supplied in 15, 30 and 45 cm (6, 12 and 18") lengths so the drop can be adjusted during installation; longer or shorter rods available to order Ceiling height: Over a table or island, suits ceilings of roughly 2.4 to 2.6 m (8 to 8.5 ft) Sizing guide: 45 cm for tables of about 90 to 120 cm (35 to 47") or as a pair over an island; 60 cm for tables of about 120 to 160 cm (47 to 63"); 75 cm for tables of 160 cm (63") and longer, or an entrance hall Hanging height: Position the bottom 75 to 90 cm (30 to 35") above the tabletop Light source: E26 or E27 sockets depending on region; warm white 2700K LED recommended; bulbs not included Weight: About 4 kg (8.8 lb) for 45 cm, 7 kg (15.4 lb) for 60 cm, 9 kg (19.8 lb) for 75 cm Installation: Hardwired by an electrician; secure the larger sizes to a joist or reinforced blocking Use: Indoor CareTurn the fixture off and allow the lamps to cool before cleaning. Wipe with a soft, dry cloth. Avoid metal polish and abrasive cleaners, which can dull the finish and mark the brass.
A single block of travertine curls forward at the top like an unrolled scroll resting against the wall. Light slips out from both the curved crown and the underside, casting a soft wash upward and downward while the face of the stone stays quiet and even.The travertine is genuine quarried stone, chosen free of holes and blemishes. Its natural pores pick up the light along the curve, and every piece carries its own tone and texture. At just 9.5 cm deep, it sits close to the wall, which makes it a good fit for hallways, staircases and bedsides. Installed in a row, the paired beams set up a steady rhythm along the wall.Details Material: Genuine travertine; tone, pores and veining vary naturally Dimensions: 19 cm (7.5 in) W x 16 cm (6.3 in) H x 9.5 cm (3.74 in) D Weight: Approx. 1.8 to 2.6 kg Light source: 2 x G9 bulbs, warm white 2700K Light direction: Up and down wall wash Dimming: Dimmable with compatible G9 bulbs and an external dimmer; the fixture is too shallow for a 13 cm integrated dimmer module Use: Dry indoor locations Installation: Hardwired to a wall junction box; installation by a licensed electrician recommended Placement: Center at roughly 152 to 168 cm (60 to 66 in) from the floor, with even spacing when mounted in a run
A single ring of faceted crystal modules, each shaped to resemble a cut gemstone, sits within a stainless steel frame. Because the facets are irregular, light breaks through them at varied angles, giving the ring a sense of depth instead of a flat, uniform glitter.Three diameters make it easy to scale to the room. The 60 cm ring works over a round table seating four to six, in an entry or in a bedroom. The 80 cm size fits a dining table for six to eight, and the 100 cm ring suits a large dining room, an open living area or a tall foyer. Over a table, plan to hang it 75 to 90 cm (30 to 35") above the surface.Details Materials: Faceted crystal modules on a stainless steel frame 60 cm (23.6"): six lights, approx. 8 to 12 kg (18 to 26 lb) 80 cm (31.4"): eight lights, approx. 12 to 16 kg (26 to 35 lb) 100 cm (39.4"): ten lights, approx. 18 to 24 kg (40 to 53 lb) Light source: Integrated LED, warm white 2700K Installation: Ceiling mounted; the weight calls for a secure fixing point
Twelve lights glow behind a dense fall of fine glass rods in this brass chandelier. The rods hang shoulder to shoulder like a sheet of falling water, bending and scattering light so the surface shifts and glints as you walk past. Inside, matte opal globes conceal each lamp and read as soft white orbs, while the warm brass frame shows through the gaps and tints the surrounding glass.The effect depends on warm light. With 2700K lamps the globes turn a creamy white and the rods take on a golden sparkle; cooler lamps push the glass toward a chilly blue. Expect gentle ambient light with scattered points of shimmer rather than focused downlight, so pair it with task lighting over an island or desk. Because the glass is finished by hand, slight variations from piece to piece are normal.Details Materials: glass rods, matte opal glass globes, brass frame Sizes: 66 cm (26") wide x 36 cm (14.2") high; 80 cm (31.5") wide x 104 cm (40.9") high; 100 cm (39.4") wide x 104 cm (40.9") high Weight: about 18 kg (40 lb) for the 66 cm; up to about 38 kg (84 lb) for the 100 cm Light source: 12 lamps, warm white LED at 2700K recommended; bulbs not included Suspension: rod, cut to suit your ceiling height, longer for stairwells and double-height rooms or shorter for lower ceilings Installation: hardwired; must be secured to a joist or reinforced blocking, not a standard ceiling box, by an electrician Sizing guide: the compact 66 cm works with standard ceilings and tables around 120 to 150 cm (47 to 59"); the two larger sizes need generous height, such as an entry, stairwell, double-height living room or tall dining room with a table of 160 cm (63") or more Hanging height over a table: leave 75 to 90 cm (30 to 35") between the tabletop and the lowest point of the fixture CareTurn the fixture off and give the lamps time to cool before cleaning. For routine upkeep, go over the rods and globes lightly with a feather duster or soft dry cloth. When the glass needs more attention, put a small amount of gentle glass cleaner on a slightly damp microfiber cloth and wipe; do not spray anything directly on the chandelier. Clean the brass with a dry soft cloth only and skip metal polishes.
Slender amber crystal rods hang in close, even rows around a stainless steel drum, catching warm light and scattering it in soft, honeyed tones. Mounted semi-flush, the fixture keeps a tidy profile against the ceiling while still reading as a true chandelier.At 80 cm across, it sits comfortably over a dining table seating six to eight, in an entry hall, or in a boutique setting with standard or higher ceilings. When placed above a table, aim for 75 to 90 cm (30 to 35") between the tabletop and the base of the fixture. Warm white bulbs at 2700K bring out the amber color of the crystal best.Details Materials: Amber-toned crystal rods on a stainless steel drum frame Dimensions: 80 cm (31.5") diameter x 50 cm (19.7") height Mounting: Semi-flush ceiling mount Bulb type: E14 sockets (E12 for North America) Recommended light: Warm white, 2700K Weight: Approximately 10 to 16 kg (22 to 35 lb) Installation: Have a licensed electrician confirm the ceiling box is rated to carry the fixture's weight
A column of thick black textured glass wraps a stainless steel core in this tall wall sconce. Because the glass is cast, its surface scatters the light softly while still letting it through, and each column carries its own variation in texture and glow. By day the dark glass reads as a calm, sculptural form on the wall.At 50 cm tall, it sits comfortably in a hallway, beside a bed, in a living room or flanking a doorway, and it looks especially good installed as a pair. For balanced placement, mount the center roughly 150 to 160 cm (59 to 63 in) above the floor.Details Materials: Cast textured glass in black, stainless steel core Dimensions: 50 cm (19.7 in) H x 18 cm (7.1 in) W Lamping: E14 sockets (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Note: Cast glass means texture and light quality vary slightly from piece to piece
This shallow, round chandelier layers olive glass tiles over a frosted glass diffuser, framed with brass details and hung from a vintage-style chain. The green is deep and muted, a shade that sits comfortably next to walnut, oak, leather, brass and warm neutral walls. Together the glass and metal give it a slightly retro, collected feel.Because the bulbs sit behind the frosted layer, their light is softened before it reaches the colored glass, producing a gentle ambient glow instead of a focused downlight. Warm white bulbs at 2700K bring out a rich green; cooler bulbs tend to flatten the color toward gray. Its low profile keeps views open across a dining room or entrance hall. Over a kitchen island or desk, plan on separate task lighting.Details Materials: olive glass tiles, frosted glass diffuser, brass details, vintage-style chain Sizes: 65 cm (25.6") or 80 cm (31.5") diameter Height (65 cm version): 16 cm (6.3") Chain: 50 cm (19.7") standard; the 65 cm version then drops about 66 cm (26") from the ceiling Bulbs: E14 sockets; warm white LED at 2700K recommended; bulbs not included Weight (65 cm version): about 6 to 9 kg (13 to 20 lb) Installation: hardwired; should be secured by an electrician to a joist or reinforced blocking, not a standard ceiling box Sizing guide: 65 cm for tables of roughly 110 to 150 cm (43 to 59") or rooms near 3.5 × 4 m (12 × 13 ft); 80 cm for tables of 150 cm (59") or more, larger living rooms or entrance halls Hanging height: over a table, aim for the bottom edge 75 to 90 cm (30 to 35") above the surface; with the standard chain, the 65 cm version fits dining ceilings of about 2.2 to 2.3 m (7.2 to 7.5 ft) CareTurn the fixture off and allow the bulbs to cool first. Routine dusting needs only a soft dry cloth or feather duster. For the glass, dampen a microfiber cloth, add a small amount of mild glass cleaner to the cloth itself and wipe gently, avoiding spraying the fixture directly. Keep the brass to a dry soft cloth, without polishes or abrasives.
This sconce is a slim, tapered brass rod finished with a lit crystal tip. Light gathers at the crystal and travels along the metal in both directions, so on the wall it reads as a fine vertical line of glow rather than a conventional fixture.The brass surface is worked to catch shadow down its full length, while the cut crystal disperses light right where it touches the rod. It sits well in a hallway, entry, stairwell or recessed niche. Mounted as a pair on either side of a doorway, the vertical gesture becomes even stronger.Details Dimensions: 50 × 11 × 11 cm (19.7 × 4.3 × 4.3 in) Materials: Brass and crystal Light source: G9 bulb, warm white 2700K Dimming: A dimmable version uses a compatible G9 bulb with an external dimmer. The 11 cm deep body has no room for a built-in dimmer. Installation: Hardwired, wall mounted Ingress rating: IP20, intended for dry indoor areas Weight: Approx. 1.8 to 2.5 kg Other versions: Also offered at 92 cm tall and in stainless steel