Entryway and Staircase Lighting

Three hand-carved alabaster orbs circle a solid brass mast, each set off-center on its own axis so the chandelier reads like a slowly turning model of the planets. Because every orb is shaped from a single block of Spanish alabaster, no two share the same veining, and when lit they glow softly and evenly from within.The light it gives is gentle and all-around, with no hard shadows, which makes it ideal ambient light for tall rooms such as a stairwell, a double-height entry or a high-ceilinged library. Seen from below and from the side on a staircase, it shows at its best. In a library, pair it with a desk or reading lamp for close work.Warm light is essential to the look. At 2700K the stone turns honey and cream, with amber and gray drifts running through it. Cooler lamps flatten it to a dull gray-white, so we recommend warm white only.Details Materials: Hand-carved Spanish alabaster orbs; heavy-walled solid brass mast and frame with reinforced joints Construction: Internally counterweighted frame so the asymmetric arrangement hangs level Dimensions: 74.5 cm (29.3 in) W x 75.5 cm (29.7 in) D x 138 cm (54.3 in) H overall Suspension: Length made longer or shorter to order to suit your ceiling height Lamping: Nine G9 LED lamps housed inside the orbs; warm white 2700K recommended Weight: About 16.5 kg (36 lb) Installation: Hardwired, indoor use; secure to a ceiling joist or reinforced blocking by a qualified electrician Placement over a table: For a round table of about 120 to 160 cm (47 to 63 in), hang the lowest orb 75 to 90 cm (30 to 35 in) above the surface, which calls for a ceiling of roughly 3 m (10 ft) or higher CareTurn the fixture off and allow the lamps to cool before cleaning. Alabaster is soft and porous, so dust the orbs only with a soft dry cloth or feather duster, never with water, sprays or cleaning products. Wipe the brass with a dry soft cloth and avoid metal polish.

A ring of brass holds a row of upright alabaster cylinders, each standing 16 cm (6.3") tall. Every cylinder is cut and polished on its own, so the clouding, veining and depth of translucency differ around the circle and from one chandelier to another. With the lamps off, the stone reads as calm and matte. Switched on, light moves through the walls of each cylinder and the veins come into view.The rod and chain are wrapped in brass, carrying the tone of the frame all the way to the ceiling. Because the glow passes through stone, the effect is soft ambient light with a gentle rhythm set by the cylinders. Over a kitchen island or a desk, pair it with focused task lighting. Warm 2700K lamps keep the alabaster a honeyed ivory; cooler light tends to make it look gray and flat.Details Materials: alabaster cylinders on a brass frame, with brass-wrapped rod and chain Diameters: 50 cm (19.7"), 60 cm (23.6"), 80 cm (31.5"), 100 cm (39.4") Cylinder height: 16 cm (6.3") Minimum overall height: 43 cm (16.9"), suited to lower ceilings Chain: 40 cm (15.7") included Light source: G4 LED lamps, warm white 2700K Approximate weight: 14 to 18 kg (31 to 40 lb) for 50 cm; 18 to 22 kg (40 to 49 lb) for 60 cm; 25 to 32 kg (55 to 71 lb) for 80 cm; 34 to 42 kg (75 to 93 lb) for 100 cm Installation: hardwired; an electrician should secure it to a ceiling joist or reinforced blocking Sizing guide: 50 cm for round tables of roughly 90 to 120 cm (35 to 47") or a compact room; 60 cm for tables of 110 to 140 cm (43 to 55") or a room near 3 × 3.5 m (10 × 11.5 ft); 80 cm for tables of 140 to 180 cm (55 to 71") or a room near 4 × 4.5 m (13 × 15 ft); 100 cm for tables 180 cm (71") and longer, a generous living room or an entry hall Hanging height: over a table, set the lowest point 75 to 90 cm (30 to 35") above the tabletop CareTurn the fixture off and wait for the lamps to cool before cleaning. Use only a soft, dry cloth on the stone. Alabaster is soft and absorbent, so never let water or any cleaning product touch it. The brass also needs nothing more than a dry cloth; skip metal polish.

A carved alabaster globe sits at the end of a slender brass arm, held well clear of the wall. That generous projection means the light spills forward into the room instead of washing the surface behind it, which makes this sconce a genuinely useful lamp beside a reading chair, next to a bed, along a hallway or flanking a mirror where you want soft light on your face.The globe is cut from natural stone, so each one carries its own pattern of veining and its own degree of translucency. When lit, the alabaster glows with a warm, even softness against the polished brass.Details Materials: Genuine alabaster and brass Dimensions: 28 cm (11 in) high, 32 cm (12.6 in) wide, 35 cm (13.8 in) projection from the wall Weight: Approx. 2.8 to 3.4 kg Bulb: E14 socket, 2700K warm white Dimming: Dimmable version available, using a compatible bulb and an external dimmer Installation: Hardwired wall mount; a plug-in version may be possible depending on the design Note: Natural stone means veining and translucency vary from piece to piece

Two thin panels of natural stone meet at an angle along a slim brass spine, forming a shallow fold on the wall. The light source sits behind the stone, so the glow washes back onto the surface around it while the panels themselves take on a soft, backlit warmth.The stone is onyx-veined, with beige and cream banding that varies from one lamp to the next. The pattern is most visible along the seam where the two panels join. Mounted against plaster, limewash or microcement, it gives a hallway, entry, living room or reading nook a gentle ambient light rather than a bright point of glare.Details Materials: Natural onyx-veined stone panels, brass spine Dimensions: 35 cm (13.8") high, 15 cm (5.9") wide, 10 cm (3.9") deep Light source: Integrated LED, warm white 2700K Light direction: Indirect, cast behind the stone panels toward the wall Installation: Hardwired wall mount Stone character: Veining and color vary naturally with each piece

Two hand-turned alabaster globes sit in brass rings along a slim horizontal bar, giving this sconce a wide, low profile that spreads soft, even light without glare. Because each globe is cut from natural stone, the veining and translucency differ between the pair and from one fixture to the next. With the lights off, the brass holds a warm tone against the pale alabaster.At just 6 inches tall, it fits above a vanity mirror or headboard where a taller fixture would crowd the wall. Center it on the mirror or bed rather than hanging it at typical side-sconce height. Mounted in pairs, it also works well along a hallway or on either side of a painting.Details Materials: Genuine alabaster and brass, with natural variation in veining Dimensions: 21.7 in W x 6 in H x 5.9 in D (55 x 15.2 x 15 cm) Weight: Approximately 4.4 to 5.7 lb (2 to 2.6 kg) Light source: Two G9 lamps, warm white 2700K, approximately 450 to 550 lumens Installation: Hardwired to a wall junction box; installation by a licensed electrician recommended Use: Indoor only

A carved alabaster shade sits on a brass mount, and the stone itself does the work of diffusing the light. What comes through is warm and soft, with no harsh edge where shade meets wall.Because alabaster is a natural stone, each shade carries its own veining and translucency, and the pattern shows most clearly once the lamp is on. Hung as a pair, the two stones will read slightly differently, which is much of the appeal. It sits comfortably beside a vanity mirror, along a hallway, or flanking a bed or sofa.Details Materials: Carved natural alabaster shade, brass mount Dimensions: 38 cm (15") high, 21 cm (8.3") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining and translucency vary from piece to piece

Stacked, softly rounded forms of alabaster climb upward into a slender glowing column, giving this floor lamp the calm, monumental feel of a carved stone marker. Switched on, the stone shows its inner life: clouds, veins and mineral traces warm into view, and no two lamps share the same pattern of light.At 170 cm tall and just 28 cm across, it takes up very little floor area. It fits neatly into a bedroom corner, beside a console or in an entryway where a broader lamp would crowd the room. The column rests on a black marble base.Details Dimensions: Ø28 × H170 cm (11 × 66.9 in) Materials: Natural alabaster with a black marble base Natural variation: Color, veining, translucency and mineral markings differ with each piece Weight: Approximately 55 to 65 kg Light source: Integrated LED Color temperature: 2700K warm white Dimming: Standard version is not dimmable Voltage: 110 to 240V, configured for the destination Use: Dry indoor settings only CareBecause of its considerable weight, settle the lamp in its final spot before you finish arranging the room, and avoid shifting it often.

Rounded globes of natural alabaster sit around a solid brass frame in this chandelier, each one carrying its own grey and honey veining so no two globes look quite alike. Switched off, the stone reads as a soft white. Switched on, light moves through it and every globe glows from the inside.The brushed brass arms are arranged symmetrically, giving the fixture a balanced look from any seat at the table. Because the light filters through stone, the effect is a gentle ambient glow rather than a focused downlight, so plan on separate task lighting over a kitchen island or desk. Warm 2700K lamps bring out cream and honey tones in the alabaster, while cooler light tends to make it look flat and grey.Details Materials: natural alabaster globes, solid brass frame in a brushed finish 6 lights: Dia 65cm x H 52cm (25.6" x 20.5"), about 8.5 kg (19 lb) 8 lights: Dia 80cm x H 52cm (31.5" x 20.5"), about 11.5 kg (25 lb) 10 lights: Dia 100cm x H 70cm (39.4" x 27.6") Lamping: G9 bulbs, one per globe (6, 8 or 10), warm white LED at 2700K Suspension: 40 cm (15.7") adjustable chain as standard; overall drop about 92 cm (36") for the 6 and 8-light, about 110 cm (43") for the 10-light Suggested ceilings over a dining table: roughly 2.4 to 2.6 m (8 to 8.5 ft) for the two smaller sizes, 2.6 to 2.8 m (8.5 to 9 ft) for the 10-light Table sizing: 6-light for tables around 120 to 150 cm (47 to 59"), 8-light for 160 to 200 cm (63 to 79"), 10-light for 200 cm (79") and longer or a tall entry hall Hanging height: leave 75 to 90 cm (30 to 35") between the table top and the base of the fixture Installation: hardwired; an electrician should secure it to a ceiling joist or reinforced blocking CareTurn the fixture off and give the bulbs time to cool before cleaning. Alabaster is soft and absorbent, so only a dry soft cloth or feather duster should touch it, never liquids or cleaning products. For the brass, a dry soft cloth is enough; skip metal polishes.

A broad fabric diffuser printed with a botanical pattern sits on a sculptural stainless steel base. By day the shade reads as a quiet, soft blue form. Once the lamp is switched on, the printed pattern comes forward and the shade becomes a glowing panel.Each diffuser is shaped by hand over its frame, so the pattern settles a little differently on every lamp. Its width suits a console, a sideboard or a generous bedside table, where there is room for the shade to be seen in full. Warm white light at 2700K keeps the print rich instead of flat.Details Colorway: Blue Base: Sculptural stainless steel Diffuser: Fabric with printed botanical pattern, hand-shaped over the frame Height: 62 cm (24.4 in) Width: 42 cm (16.5 in) Light: Warm white, 2700K

Two folded panels sit within a curved frame of brushed brass, and the metal traces the bend of each one so the pendant reads from the side as a single sculpted fold. The upper panel is a printed botanical textile in a white colorway. Below it, a plain white panel holds the light, diffusing it evenly and keeping the source out of sight.By day the pattern does the talking. After dark the lower panel glows warmly, and because the LED is concealed there is no glare when you look up from a dining chair or across the room. Sized at 75 cm wide, it works well over a dining table of roughly 150 to 200 cm (59 to 79"), above a reading corner or in an entry.Details Materials: brushed brass frame, printed botanical fabric upper panel, white diffusing lower panel Color: white (also offered in blue) Width: 75 cm (29.5") Shade: 45 cm (17.7") Overall height: 120 cm (47.2") standard; rod can be made shorter or longer to order Light source: integrated LED, 900 to 1,200 lumens, no bulbs required Canopy: round ceiling plate, 12 cm (4.7") diameter Weight: approximately 5 to 8 kg (11 to 18 lb) Installation: hardwired to a ceiling junction box; have an electrician confirm the ceiling can support the fixture Hanging guide: over a table, set the lower edge 75 to 90 cm (30 to 35") above the surface; the standard height suits ceilings of about 2.7 to 2.9 m (9 to 9.5 ft) Use: dry indoor rooms only CareDust the brass and fabric with a dry microfiber cloth or soft brush. Keep water and cleaning products away from the fabric panel.

Tiers of white glass ovals open around a central hub like petals, each one rippled with a wave texture that catches light whether the fixture is lit or dark. The layering gives the chandelier real depth and diffuses the lamps behind it, so the room receives a broad, even, glare-free glow rather than a focused downlight.The frame and canopy are polished solid brass, and a fabric-wrapped suspension softens the line to the ceiling. Lit at a warm 2700K, the glass reads as a soft warm white and the brass looks deep and rich. Cooler lamps would turn the glass bluish and flatten the metal, so warm white is intended as part of the design. It suits a large dining room, living room, foyer or hotel lobby.Details Small: 115 cm (45.3 in) diameter, 90 cm (35.4 in) high, approx. 28 to 34 kg (62 to 75 lb) Large: 130 cm (51.2 in) diameter, 90 cm (35.4 in) high, approx. 34 to 42 kg (75 to 93 lb) Materials: wave-textured white glass ovals; polished solid brass frame and canopy Suspension: fabric-wrapped, adjustable, and made to length for your ceiling height Light source: G9 LED lamps, about 3 to 5 W each, warm white 2700K Installation: hardwired; should be fixed to a joist or reinforced blocking by an electrician Sizing guide: Small for a table seating eight to ten (about 200 to 240 cm, 79 to 94 in) or a large living room; Large for tables of 240 cm (94 in) and longer or a double-height entry Hanging height: 75 to 90 cm (30 to 35 in) above a table; about 240 to 260 cm (7.9 to 8.5 ft) from floor to fixture bottom in open areas. Its 90 cm height calls for a generous ceiling. Gives ambient light; add task lighting over a table used for work CareTurn the fixture off and allow the lamps to cool first. Dust the glass with a soft dry cloth or feather duster, and for a deeper clean wipe it with a damp microfiber cloth, then dry. Dust the brass with a soft dry cloth and avoid polish.

This floor lamp takes an organic, branching shape and renders it in fiberglass with a dark, textured finish. It stands nearly six and a quarter feet tall, reading as sculpture first and lighting second, and its surface catches shadow in a way that gives it real weight in the room.Because of its height and spread, it wants open wall or ceiling space around it. A generous entry, a large living room or a studio interior will let the form breathe. Fiberglass keeps it far lighter than it looks, at roughly 9 kg, so repositioning it is manageable.Details Dimensions: 190 cm (74.8 in) high, 70 cm (27.6 in) diameter Material: fiberglass with a dark textured finish Weight: approximately 9 kg Light: warm ambient glow; the product data lists an integrated LED at around 1,200 lumens, though the exact light source is not fully confirmed Color temperature: warm white (source data cites both 2700K and 3000K) Voltage: 110V or 240V, configured for your region Dimming: dimmable with a suitable dimmer Use: dry indoor locations only

Three rings of translucent alabaster hang one beneath the other, each smaller than the last and set at its own height, so the circles appear to drift in the air on slender stainless-steel cables. An LED hidden inside every ring lights the stone from within. The rings themselves become the light, and the natural clouding and veining of the alabaster show all the way around each circle. Because this is real stone, no two rings look alike, and you can choose a heavier, lighter or random veining pattern.The warm 2700K light suits alabaster especially well, drawing out honey and cream tones with soft amber and gray drifts through the stone. The result is a gentle, layered ambient glow with no exposed lamps. Over a kitchen island or work surface, pair it with dedicated task lighting. It is scaled for generous dining rooms, double-height living spaces, entrance halls, stairwells and hospitality interiors.Details Material: Spanish alabaster rings on stainless-steel suspension cables Canopy: Gold (solid brass) or Black (stainless steel with black finish) Small: rings of 100 / 60 / 30 cm (39.4" / 23.6" / 11.8"), about 75 W, about 16 kg (35 lb) Medium: rings of 120 / 80 / 40 cm (47.2" / 31.5" / 15.7"), about 120 W, about 25 kg (55 lb) Large: rings of 150 / 100 / 50 cm (59" / 39.4" / 19.7"), about 180 W, about 40 kg (88 lb) Ring height: 7 cm (2.8") each Light source: integrated LED, 2700K warm white, replaceable LED strips Installation: hardwired; an electrician should secure it to a joist or reinforced blocking, not a standard ceiling box Sizing guidance Small suits a table of roughly 180 to 240 cm (71 to 94") or a large living room Medium suits a table of 240 cm (94") or longer, or a double-height living room Large is intended for entrance halls, stairwells and expansive open rooms Above a table, position the bottom ring 75 to 90 cm (30 to 35") over the surface; at the full drop this works with ceilings of about 3.4 to 3.6 m (11 to 12 ft) CareTurn the fixture off and give it time to cool before cleaning. Alabaster is soft and porous, so keep moisture and products away from it entirely and remove dust with a dry, soft cloth or feather duster. Treat the metal parts the same way, using only a dry cloth and no polish.

Three plaster blades, each shaped by hand to its own curve, gather around a slender brass stem in this sculptural pendant. The matte plaster softens the light instead of bouncing it, so the fixture casts a low, warm glow that settles across the table below.Because every blade is formed and finished by hand, no two pieces share exactly the same surface, tone or sweep. This three-blade version is the more compact of two sizes, well suited to a round dining table seating four to six, a kitchen island or an entry hall. A wider four-blade version suits larger tables and rooms with more height.Details Materials: Hand-formed matte plaster blades on a brass stem Dimensions: 60 cm (23.6") wide, 55 cm (21.7") high Suspension: 30 cm (11.8") rod as standard, available in any length when ordered Weight: Approximately 6 to 9 kg (13 to 20 lb) Bulb type: E27 sockets (E26 for North America) Recommended light: Warm white, 2700K

Carved alabaster domes sit at the ends of gently curved solid brass arms, rising in tiers of three, six or nine heads. The natural stone softens each lamp into a warm, even glow, and the veining in every dome is unique, while the arched metal frame gives the fixture a clean, structured outline.The smallest size suits a round table for four to six or an entry. The six-head version is scaled for a dining table seating six to eight, and the nine-head works in a large dining room or a double-height foyer. When hanging over a table, plan for the lowest dome to sit 75 to 90 cm (30 to 35") above the surface.Details Materials: Hand-carved alabaster shades, solid brass arms Frame finish: Brass or black stainless steel 3 heads: 61 cm (24") diameter x 62 cm (24.4") height, approx. 10 to 14 kg (22 to 31 lb) 6 heads: 81 cm (31.9") diameter x 103 cm (40.6") height, approx. 18 to 24 kg (40 to 53 lb) 9 heads: 102 cm (40.2") diameter x 132 cm (52") height, approx. 28 to 36 kg (62 to 79 lb) Bulbs: One per head; E14 sockets, or E12 for North America. Warm white 2700K recommended