Entryway and Staircase Lighting

This flush mount takes the shape of a four-lobed quatrefoil, framed in antique brass and ringed with clear fluted glass. Beneath the rim, an opal diffuser softens the light and sends it evenly downward, while the ribbed glass at the edges picks up a gentle glow. You see light, not bulbs.At just 5 inches deep, it sits close to the ceiling, which makes it a good choice for rooms with standard ceiling heights where a hanging fixture would crowd the space. The scalloped outline adds character to bedrooms, hallways, entries and dining rooms without dominating them.Details Finish: Antique brass Glass: Clear fluted glass perimeter with opal diffuser Width: 17.25 in (43.8 cm) Depth: 5 in (12.7 cm) Light source: 3 x E26 bulbs, warm white 2700K Installation: Hardwired, indoor use Other finishes: Also offered in plain brass and gunmetal

A four-lobed outline gives this flush mount its character, drawn in a continuous brass body that sits close to the ceiling like a single sculpted piece of metal. Beneath it, an opal glass diffuser spreads a soft, even glow and keeps the lamps out of sight.Because the light falls evenly downward, it works well in rooms where the ceiling fixture does most of the work, such as bedrooms, entryways and living rooms with standard ceiling heights. Installed in a series along a hallway, the repeated clover shape sets a pleasing rhythm.Details Materials: Brass body with opal glass diffuser Width: 43.8 cm (17.25 in) Depth: 12.7 cm (5 in) Light source: Three E26 bulbs, warm white 2700K Installation: Hardwired, for indoor use

This petite wall sconce hides its light source behind a slab of blonde terracotta, sending a soft glow outward onto the wall instead of into the room. With no visible bulb, there is no glare. Switched off, it hangs like a piece of fired clay; switched on, the wall around it takes on a warm wash.Every slab is fired by hand, so the color, surface texture and the way light catches the edges will differ slightly from one piece to the next. The brass is given an antique finish that sits comfortably alongside the clay. Mounted in pairs flanking a vanity mirror, the backlighting is gentle on faces. Spaced along a hallway or placed beside a bed, it offers quiet ambient light without shining directly at anyone.Details Shade: Hand-fired blonde terracotta slab Metal: Brass in an antique finish Lighting effect: Backlit halo onto the wall, no exposed bulb Color temperature: Warm white, 2700K Installation: Hardwired Note: Color and surface vary naturally between pieces

This low drum chandelier pairs a broad shade of finely pleated fabric with slim, ribbed bands of aged brass. The folds fan out from the center toward the rim, and when lit they scatter the light into a warm, even glow instead of a hard downward beam.The pleats are real folds of fabric, finished by hand rather than printed or embossed, so light moves through them with a gentle irregularity that glass does not give. At just 5 inches deep, the fixture sits close to the ceiling on an adjustable rod, which makes it a good fit for rooms with lower ceilings. It works well over a round dining table of roughly 35 to 47 inches, in a bedroom, or in a hotel lounge.Details Materials: Hand-finished pleated fabric shade with ribbed aged brass bands Dimensions: 20 in (50 cm) diameter, 5 in (12 cm) deep Mounting: Adjustable rod; drop height is set at installation Light source: Two E26 sockets (E27 outside North America), 9W maximum per bulb Recommended bulbs: Warm white 2700K LED, which flatters the fabric and keeps the shade cool

This ceiling lamp is shaped from real plaster and hand finished to a soft, matte surface that reads almost like carved stone. A metal rod holder is set inside the plaster to give the sculptural body its strength. Because each one is finished by hand, expect small variations in surface from piece to piece.The plaster diffuses the bulbs into a gentle ambient glow, well suited to a dining room, an entry, a bedroom or a living room. Both sizes are nearly as tall as they are wide, so they show best where the ceiling has height to spare. For a kitchen island or a desk, plan on task lighting alongside it.Details Material: hand-finished plaster with an internal metal rod holder Small: 50 cm (19.7") wide, 46 cm (18.1") high, three E27 bulbs, weighs about 4 to 6 kg (9 to 13 lb) Large: 75 cm (29.5") wide, 68 cm (26.8") high, five E27 bulbs, weighs about 7 to 10 kg (15 to 22 lb) Canopy: 18 cm (7") diameter Suggested bulbs: warm white LED at 2700K, not included Installation: hardwired; should be fixed by an electrician to a joist or reinforced blocking Sizing guide: the 50 cm suits a round table of about 90 to 120 cm (35 to 47"), a small entry or a bedroom; the 75 cm suits a dining table of about 140 to 180 cm (55 to 71"), a larger entry or a living room Hanging height: over a table, place the bottom of the lamp 75 to 90 cm (30 to 35") above the surface CareTurn the lamp off and let the bulbs cool first. Dust with a soft, dry brush or cloth. Plaster is porous and marks easily, so keep water and cleaning products away from it.

A broad, shallow bowl of real plaster forms this ceiling pendant. Each one is smoothed by hand with a trowel, so the matte surface carries soft, irregular marks that never repeat from one piece to the next. Hung overhead, it reads as much like sculpture as lighting, and it looks at home beside limewashed walls, oak, linen and stone.The plaster conceals the bulb and diffuses its glow, giving a calm ambient light rather than a focused beam. Warm white matters here: at 2700K the bowl takes on a warm chalky tone, while cooler light makes it look gray and flat. If the table below is used for reading or work, plan on task lighting nearby.Details Material: Cast plaster, hand-troweled matte finish Dimensions: 100 cm (39.4 in) long x 62 cm (24.4 in) wide Weight: Approximately 10 to 14 kg (22 to 31 lb) Light source: E27 base, warm white LED at 2700K recommended; bulb not included Installation: Hardwired; should be secured by an electrician to a joist or reinforced blocking Sizing: Suits a dining table of about 160 to 200 cm (63 to 79 in), or an entry or living room of around 4 x 4.5 m (13 x 15 ft) Placement over a table: Hang the bottom 75 to 90 cm (30 to 35 in) above the surface, with the long side running along the table Suitable ceilings: Works with sloped ceilings CareTurn the light off and let the bulb cool before cleaning. Dust with a soft dry brush or dry cloth. Plaster is porous and marks easily, so keep water and cleaning products away from it.

Deep vertical pleats run around the full circumference of this metal drum chandelier, catching light on one fold and falling into shadow on the next. The surface reads differently from every angle, so the fixture seems to shift as you walk through the room.The drum is pleated by hand, which means the spacing of the folds and the way light travels along them vary slightly from one piece to another. At 32 inches across, it sits well over a round or square dining table of roughly 47 to 63 inches, and it also has the presence for a living room or a generous entry. Over a table, plan to hang the base 30 to 35 inches above the surface.Details Finish: Silver or dark bronze Material: Hand-pleated metal Dimensions: 32 in (81.3 cm) diameter, 18 in (45.7 cm) high Bulbs: 3 x E26/E27 Light: Warm white, 2700K, directed from the open underside Installation: Hardwired, for indoor use

This flush mount pairs a cream opaline glass shade with an antique brass ceiling plate. The glass is shaped in folded panels that resemble layered petals, so the shade catches soft shadow along each crease while still reading as light and quiet overhead. When lit, the cream tone gives off a warm, even glow.The smaller size sits comfortably in a bedroom, hallway or dressing room. The larger one has the presence for an entry, a landing or a living room with a standard ceiling height, and both keep a low profile where headroom is limited.Details Shade: Folded cream opaline glass Ceiling plate: Antique brass Sizes: Small, 15.3 in (38.9 cm); Large, 23.25 in (59 cm) Light source: Two E12 bulbs (E14 outside North America) Recommended color temperature: Warm white, 2700K Installation: Hardwired, mounts flush to the ceiling

A narrow cylinder of alabaster capped in solid brass, this small pendant pairs pale natural stone with warm metal in a single upright form. Each column carries its own veining and cloudy passages, so no two look alike. With the light off it reads as quiet, softly marked stone. Switched on, the glow passes through the translucent body and brings the veining forward, while the brass adds a warm accent.The bulb sits within the column, so the stone lights from inside and casts a gentle, low glow. Treat it as mood and accent lighting. A single pendant works well beside a bed, in a compact entry or above a reading chair. For a kitchen island or dining table, a row of three or more spaced roughly 50 to 60 cm (20 to 24 in) apart gives better coverage, ideally alongside dedicated task lights. Over a counter or table, set the bottom of the pendant about 75 to 90 cm (30 to 35 in) above the surface. In stairwells and tall rooms, several can be hung at varied heights.Light color matters with alabaster, since the stone takes on the tone of the bulb inside it. A 2700K warm white LED draws out honey and cream tones, while cooler bulbs leave the stone looking gray and dull.Details Materials: alabaster with solid brass Dimensions: 10 cm (3.9 in) diameter, 26 cm (10.2 in) height Weight: approximately 2 to 3 kg (4.4 to 6.6 lb) Light source: one E14 bulb, not included Recommended bulb: warm white LED, 2700K Installation: hardwired CareTurn the pendant off and allow it to cool before cleaning. Alabaster is soft and porous, so use only a dry, soft cloth on the stone and never apply water or any cleaning product. The brass should also be wiped with a soft dry cloth, without metal polish.

This tall cylindrical pendant is formed from hundreds of slender fabric threads stretched tight between a pair of polished stainless steel rings. An integrated LED concealed in the bottom ring sends light up the length of the threads, so the whole column glows in its own color. Seen from a distance it reads as a solid form, and up close it becomes sheer enough to see the room behind it.The threads come in red, green or cream, and the warm 2700K light is central to how each one looks: cream turns soft and golden, red deepens, and green settles into a calm tone. It works as ambient light with real presence, so pair it with task lighting over a table or island. The smaller diameters sit well over a compact table or in a row above an island, the 55 cm size suits a table for four to six, and the largest sizes and tallest drops are scaled for entry halls, stairwells and double-height rooms, where several heights can be grouped together. Over a table, aim for the bottom edge to sit roughly 75 to 90 cm (30 to 35") above the surface.Details Materials: fabric threads, polished stainless steel rings, polycarbonate diffuser Colors: Red, Green, Cream Diameters: 37 cm (14.57"), 55 cm (21.65"), 83 cm (32.68"), 124 cm (48.82") Sizes: D37 x H73 cm, H113 cm or H193 cm; D55 x H71, H73, H112, H113, H192 or H193 cm; D83 x H110, H113, H191 or H193 cm; D124 x H107, H123, H190 or H193 cm Light source: integrated LED, warm white 2700K, no replaceable bulb Weight: about 6 to 16 kg (13.2 to 35.3 lb), depending on size Mounting: ceiling suspended; drop length can be adjusted to suit the room Installation: should be secured by an electrician to a joist or reinforced blocking, not a standard ceiling box Dimming: available as an option CareTurn the power off before cleaning. Remove dust from the threads with a soft dry brush, or use a hairdryer set to cool. Clean the steel rings using a dry, soft cloth, and never let the threads get wet.

A slim folded shape in textured iron, finished in champagne bronze. Instead of shining from a single opening, the light slips out through the cut-outs between each fold, casting a soft pattern across the wall.Small and very shallow, it suits a niche, a tight hallway or a bedside in a compact room. It also works well repeated along a long passage where a larger fixture would feel crowded.Details Size: 16 cm (6.3 in) H x 6 cm (2.4 in) W x 4 cm (1.6 in) D Material: Textured iron Light source: LED, warm white 2700K Weight: About 0.8 to 1.2 kg (2 to 3 lb) Installation: Hardwired to a standard wall junction box by an electrician. Use fixings suited to the fixture and your wall construction. Placement: For general wall use, center around 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only

A slim stem of hand-hammered copper rises from a broad, textured base and carries a generous fabric shade. Because the metal is worked by hand, the hammer marks land differently on each lamp, and the copper deepens to a darker tone over the years instead of staying bright.Standing 76 cm tall, this is a tall table lamp. It sits best on a lower surface such as a console, sideboard or living room end table, where the shade settles close to eye level for someone seated nearby.Details Material: Hand-hammered copper with a fabric shade Height: 76 cm (29.9") Width: 45 cm (17.7") Cord length: 180 cm Socket: E26 (E27 outside North America)

Cut from a single block of natural alabaster, this sconce takes the form of a stepped pyramid that sits close to the wall. With the light off, it reads as a carved stone relief. Switched on, each tier glows at its own depth and the stone's natural veining comes forward in warm, soft light.Because the alabaster is quarried and shaped by hand, the veining, color and translucency vary from one sconce to the next, so no two are alike. Its slim 3.9 inch projection makes it a good fit for hallways, entryways and bedside walls. Its consistent form also works well repeated along a hotel corridor.Details Material: Solid natural alabaster with stainless steel Dimensions: 9.8 in H x 9.8 in W x 3.9 in D (25 x 25 x 10 cm) Weight: Approximately 9 to 11 lb (4.2 to 5 kg) Light source: Integrated LED, warm white 2700K, diffused through the stone Voltage: 110 to 240V, configured for the destination Installation: Hardwired wall mount. Secure into a stud or use anchors rated for the weight.

A slim oval of natural marble sits just forward of a brass backplate, held in place by two small pins so the stone appears to hover off the wall. The marble is cut thin enough for the integrated LED to glow through it, and the veining becomes the pattern once the light is on.Because the stone is natural, the cream and sand veins fall differently on every piece, and the thinner sections brighten first. At only 8 cm deep it sits close to the wall in a narrow hallway, and its height gives it enough presence beside a bed or a mirror. Mounted as a pair on either side of a vanity mirror at face height, it casts even, flattering light.Details Dimensions: 30 cm (11.8 in) H x 18 cm (7.1 in) W x 8 cm (3.1 in) D Materials: Genuine marble with a brass backplate; veining and tone vary naturally Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by an electrician Use: Indoor, dry locations only; beside a vanity, keep it outside wet zones Weight: Approximately 2.5 to 3.5 kg

Two tiers of hand-blown olive glass discs circle a stainless steel ring frame, with a matching olive glass bowl set below to gather the light and direct it down toward the table or floor. The glass lends a warm green-gold tone to the room, at its richest with warm 2700K lamps. Because every disc is blown by hand, each one differs slightly in shade and surface texture.The smallest size sits comfortably over a round table for six, a kitchen island of roughly 59 to 71 inches, or in a bedroom. The middle size fits a table for eight or a living room, and the largest is scaled for a table seating ten to twelve, a great room or a double-height entry. Over a table, plan for the lowest glass to hang 30 to 35 inches above the surface.Details Materials: hand-blown olive glass discs and bowl, stainless steel ring frame 60 cm (23.6"): six lights, approx. 18 kg (40 lb) 80 cm (31.5"): nine lights, approx. 28 kg (62 lb) 95 cm (37.4"): twelve lights, approx. 42 kg (93 lb) Bulbs: E14 sockets (E12 for North America); warm white 2700K recommended Suspension: 50 cm (19.7") chain standard, longer lengths available at order for tall ceilings and stairwells Installation: all sizes require a structural ceiling fixing installed by an electrician

This large chandelier gathers eighteen hand-blown olive green glass globes around a brass frame.Because each sphere is blown by hand, the glass shifts from a golden tone where it is thin to a deeper green where it is thicker, and no two globes match exactly. These variations are natural to the process. The color responds to the bulbs inside, so warm white lamps around 2700K bring out the rich golden olive, while cooler light tends to look gray and flat. With eighteen lamps the fixture can light a full dining or living room by itself, and a dimmer lets you soften it in the evening.Details Glass: Eighteen hand-blown olive green globes, also offered in cherry glass Diameter: 90 cm (35.4 in) Body height: 80 cm (31.5 in) Sockets: 18, E14 or E12 depending on region (E12 for North America) Maximum wattage: 28W per lamp Bulbs: Not included. Warm white around 2700K is recommended. Dimming: Can be installed on a dimmer Sizing and Placement Suits a dining table of about 135 to 180 cm (53 to 71 in) Hang the lowest globe 75 to 90 cm (30 to 35 in) above the tabletop Over a table, works with ceilings from about 2.4 m (8 ft) Over a walkway, leave at least 2.1 m (7 ft) of clearance below, which usually requires a ceiling of about 3 m (10 ft) For double-height entries or stairwells, request a longer rod InstallationThis is a heavy fixture. Ask your electrician to confirm the ceiling box is rated for the weight or to add structural support. Hang and wire the frame first, then attach the glass globes one at a time.

This tall floor lamp pairs an olive green crackle-glass dome with a slender aged-brass frame. The glass is translucent, so the brass multi-light fitting shows through, while the fractured surface scatters reflections and gives the shade a lively depth once the lamps are on.The green is muted enough to sit comfortably alongside walnut, dark wood, travertine, marble, leather and warm neutrals. A narrow column and round base keep the footprint small, so it tucks easily beside a sofa or lounge chair, and it suits hotel suites, reception areas and restaurant lounges that call for decorative ambient light. It reads well in Art Deco and mid-century rooms as well as contemporary interiors built around stone, timber and warm metals.Details Dimensions: H 130 x W 35 x D 35 cm (H 51.2 x W 13.8 x D 13.8 in) Shade: Olive green crackle glass dome with an irregular fractured texture Body: Aged brass stem, shade rim and circular base Light source: 2 x E27 sockets, configured as E26 for North America Use: Freestanding, for dry indoor locations only Style: Art Deco and mid-century modern

This tall chandelier stacks layers of smoky art glass against warm brass, creating a vertical silhouette with a clean, architectural line. The tinted glass lends the light a sense of depth and mood, glowing in soft amber-grey tones when lit.Because smoky glass absorbs some of the light passing through it, warm lamps around 2700K bring out its best color. Cooler light tends to flatten the glass and make it look dull. With its generous height, the fixture sits comfortably in dining rooms, entryways and stairwells where ceilings reach roughly 2.7 m (9 ft) or more.Details Materials: Smoky art glass and brass Width: 70 cm (27.6") Height: 90 cm (35.4") Suspension: 30 cm (11.8") rod as standard Recommended lamps: Warm white, 2700K Recommended ceiling height: From about 2.7 m (9 ft) Over a dining table: Suited to tables of 120 to 180 cm (47 to 71"), with the bottom of the glass set 75 to 90 cm (30 to 35") above the tabletop

Carved from natural travertine, this LED wall sconce carries the quiet, pitted texture and soft taupe coloring that make the stone so appealing. Because travertine forms over long periods in nature, the veining and surface character shift from piece to piece, so your sconce will have its own markings.The design draws on a Japandi sensibility, pairing restrained Japanese form with practical Scandinavian ease. When lit, the LED source washes the stone in a gentle glow that brings out its warm undertones, a calm choice for a living room, bedroom, hallway, entry or bath.Details Material: Natural travertine stone Color: Taupe, with natural variation in pattern and tone Size options: 35 cm or 60 cm Color temperature options: 3000K or 4000K Voltage: 90-260V AC Installation: Wall mounted

A solid bar of natural travertine, lit along its full length, this sconce turns a plain wall into a quiet line of glowing stone. It can be mounted vertically or horizontally, so it adapts to a narrow vanity wall as easily as a long corridor.Each bar is cut from quarried travertine chosen to be free of holes and marks. Tone, pores and veining vary from piece to piece, and the longer bars reveal more of that natural character. The shorter lengths sit well beside a bed, at a vanity or along a hallway. The 90 cm suits a living room or stair wall, and the 120 cm gives a feature wall or hospitality interior room for a long, uninterrupted line of light.Details Material: Natural travertine, selected without holes or marks Lengths: 35 cm (13.8"), 60 cm (23.6"), 90 cm (35.4"), 120 cm (47.2") Light source: Integrated LED Color temperature options: 3000K, 4000K or 6000K Orientation: Vertical or horizontal mounting Installation: Hardwired wall mount; longer lengths must be fixed into structure

Cut from natural yellow travertine, this wall light carries the stone's porous, organic surface and a warm honeyed color that softens any wall it sits on. Because the veining and tone shift from block to block, no two pieces look quite the same.An integrated warm white LED gives a gentle, settled glow that suits a bathroom vanity, a hallway or a stair landing, and the fixture is built to handle dust and water, so it can also be used outdoors under cover.Details Material: natural yellow travertine Dimensions: 190 mm diameter x 260 mm high (about 7.5 in x 10.2 in) Light source: 7W integrated LED, warm white; no bulb to replace Protection: dust-tight and resistant to water jets, suitable for bathrooms and covered outdoor areas Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Variation: natural stone veining and tone differ on every piece

A long rail of solid brass runs up the wall and ends in a small shade cut from natural onyx. Switched on, the stone lights from within, while the rail draws a clean vertical line that gives the sconce an architectural presence despite its slim profile.Because onyx is a natural mineral, each shade has its own color, banding and translucency, so every lamp glows a little differently. The tall, narrow form works well beside a bed where a table lamp would take up too much room, and it also suits a reading nook, an entry or a tight hallway. At the bedside, mount it so the shade falls just above shoulder height when you are sitting up.Details Materials: Solid brass rail, natural onyx shade Dimensions: 76 cm (29.9") H x 15.8 cm (6.2") W x 14 cm (5.5") D Weight: Approximately 5 to 7 kg (11 to 15 lb) Installation: Hardwired wall mount; secure to a stud or use appropriate wall anchors Recommended light: Warm white 2700K, which draws out the amber tones in the stone

A slender column of carved alabaster, this pendant hangs quietly when unlit, showing a pale, matte surface. Switch it on and the light passes through the stone walls, revealing the veining, cloudy passages and depth of color from within. Because each one is carved from natural stone, no two pendants share the same pattern.The stone takes on the color of the lamp inside it. A warm white LED at 2700K brings out honey and cream tones and softens the veins, while cool white gives a grayer, chalkier look. Both are offered, though warm light suits this piece best. The glow is soft and even, meant for ambient and accent lighting, so pair it with task lighting over a kitchen island.The shorter size works beside a bed in place of a table lamp, or in a narrow hallway. Hang it a little above shoulder height when seated. The taller size has more presence over a dining table or island, where two to five can run in a line or a loose cluster, with the bottom 30 to 35 in (75 to 90 cm) above the surface.Details Material: Carved natural alabaster Heights: 25 cm (9.8 in) or 35 cm (13.8 in) Width: 5 cm (2 in) on the 25 cm size Light temperature: Warm white (2700K) or cool white Bulb: One G9 or E27 LED, depending on destination country; bulb not included Weight: Approximately 1.5 to 2.5 kg (3.3 to 5.5 lb) CareTurn the light off and let it cool before cleaning. Dust with a soft, dry cloth only. Alabaster is porous and marks easily, so keep water and cleaning products away from the stone.

A thin sheet of natural jade wraps around the light source in this compact sconce, secured by a single polished brass stud. When lit, the stone reveals soft clouding in cream and pale peach, and its edges dissolve into a gentle glow across the wall.Because the jade is cut fine enough for light to pass through, every piece carries its own pattern, color and degree of translucency. The sconce is meant for mood rather than task lighting, and it sits comfortably beside a bed, along a hallway or over a vanity. On a longer wall, a pair gives a more balanced effect than one alone.Details Material: Natural jade with a polished brass stud Dimensions: 20.7 cm (8.1") high, 15.8 cm (6.2") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount