Bedroom Lighting

This semi-flush ceiling light is finished in antique brass and mounts close to the ceiling, bringing the warmth of aged metal to rooms where a hanging pendant would take up too much height. It is a natural fit for lower ceilings that still deserve a considered fixture.Two diameters are offered. The 45 cm size sits comfortably in a bedroom, hallway or entry, while the 75 cm size carries the proportions of a dining room, living room or generous bedroom.Details Finish: Antique brass, with the brass finish able to be specified before production Sizes: 45 cm (17.7") or 75 cm (29.5") diameter Lamping: E27 sockets (E26 for North America), designed for warm white 2700K lamps Approximate weight: 6 to 9 kg (13 to 20 lb) for the 45 cm; 10 to 14 kg (22 to 31 lb) for the 75 cm Installation: Have your electrician confirm the ceiling box is rated to carry the fixture's weight

A thick column of textured glass wraps a solid brass core in this wall sconce. The cast surface carries real depth, scattering the light while still letting it glow through, so the eye registers the glass and metal before it notices the fixture.Because each column is cast rather than pressed, the texture, thickness and play of light differ slightly from one piece to the next. Its proportions sit well in a hallway, on a bedroom or living room wall, or flanking a doorway. It looks especially good installed in pairs at even spacing.Details Materials: Cast textured glass around a solid brass core Also available: Black textured glass on stainless steel Dimensions: 50 cm (19.7") high, 18 cm (7.1") wide Weight: About 2.5 to 3.4 kg (5.5 to 7.5 lb) Bulb type: E14 (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Suggested mounting height: Center about 150 to 160 cm (59 to 63") from the floor

A clear glass cylinder sits inside a frame of textured brass, and because the glass is fully transparent, the hammered surface of the metal stays in view. The sconce carries visual interest whether it is lit or not. The brass is hand-worked, so the texture lands a little differently on each piece, and the finish will deepen gradually over the years.At 54 cm tall, it has a strong vertical presence that suits a hallway, a stair wall or a dining room. Hung in pairs on either side of a doorway, it frames the opening nicely. A typical center height is about 60 to 66 in (152 to 168 cm) from the floor.Details Materials: Textured brass and clear glass; the hand-worked texture varies slightly from piece to piece Dimensions: 54 cm (21.26 in) H x 15 cm (5.91 in) W x 11 cm (4.33 in) D Wall projection: 11 cm (4.33 in) Weight: Approximately 1.8 to 2.6 kg Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by a qualified electrician Use: Dry indoor locations only; not for outdoor use

This small ceiling light pairs a body of natural travertine, carved from a single block, with a canopy of solid walnut turned in a dark tone. The stone carries its own pitting and earthy veining, so each fixture looks a little different from the next. When the lamp is on, the hollow inside the travertine glows and the surface texture comes forward, while light falls in a soft pool below.Travertine responds closely to the color of its light. Under 2700K warm white it reads rich and earthy, and cooler light tends to make it look gray and flat, so a warm lamp is intended here. At just 12 cm across and 10 cm deep, the fixture works well on low ceilings and in repetition: a row along a corridor spaced about 1.5 to 2 m apart, a single one in a powder room, or two above a bar or niche. It is best treated as an accent light, with other ambient sources in larger rooms.Details Materials: natural travertine body carved from one block; solid walnut canopy in a dark tone Dimensions: 12 cm (4.7 in) diameter, 10 cm (3.9 in) high Profile: sits within 10 cm (3.9 in) of the ceiling Light source: one E27 lamp Recommended lamp: 3 to 5 W warm white LED, 2700K Light output: soft downward pool with a glowing stone body Mounting: walnut canopy fixes directly to the ceiling; hardwired Weight: approximately 1.5 to 2.5 kg (3.3 to 5.5 lb) Custom options: wood species and stone finish can be changed on volume orders CareTurn the fixture off and allow the lamp to cool before cleaning. Wipe the stone and walnut with a soft, dry cloth. Keep water and acidic or abrasive cleaners away from the travertine, since they can etch its surface.

A column of clear glass narrows as it rises from a broad brass base, standing 160 cm (63 in) tall. Inside, four bulbs are spaced along the column, so the glow travels up the full height of the glass instead of collecting at the top.The taper is shaped by hand, which means the glass wall is thicker in some places and thinner in others. Light catches those variations unevenly, giving the column a sense of depth when lit. Its slim vertical profile reads well from across a room, beside a sofa, in an entry or in a hotel suite.Details Materials: Hand-shaped clear glass column on a brass base Dimensions: 160 cm (63 in) H x 27 cm (11 in) W x 35 cm (14 in) D Base: 36 x 27 cm Weight: 26 kg (57 lb) Light source: Four E27 sockets (E26 for North America), 9W maximum per bulb Recommended bulbs: Globe-shaped, warm white 2700K; bulbs not included Assembly: Required on arrival; given the weight, place the lamp before final styling Use: Dry indoor locations only

A sculpted plaster form that sits close to the wall and lets light escape only from its open ends. The body itself stays matte and softly shadowed, so the fixture reads less like an added object and more like part of the architecture.Each sconce is finished by hand, which means tone and texture shift slightly from one piece to the next. The surface absorbs light the way a painted wall does instead of reflecting it, making it a natural fit for rooms finished in plaster, limewash or lime render. It works well along a hallway or stair wall, and equally well in a living room or bedroom.Details Material: Hand-finished plaster with a matte surface Dimensions: 47 cm (18.5") long, 23 cm (9.1") wide, 22 cm (8.7") high Light: Warm white, 2700K, directed from the open ends Installation: Hardwired wall mount Use: Indoor

A glass dome banded in color rests on a base of polished green marble, setting glossy glass against cool, heavy stone. The contrast gives the lamp a postmodern look that works as well on a bedside table as it does on a console or office desk.Because the marble is natural, each base carries its own veining and depth of color. Place it where the dome sits near eye level so the banding can be seen against the wall behind it, such as on a side table or a styled shelf.Details Base: Polished green marble Shade: Color-banded glass dome Dimensions: 40 cm (15.7") high, 34 cm (13.4") wide Cord: 180 cm (about 71") Bulb: E14 LED, included Light output: About 600 lumens, warm white at 2700K

A tapered parchment shade sits on a slim brushed stainless steel base, its edges joined with hand-sewn cross-stitching. Because every seam is worked by hand, the spacing and tension vary a little from one lamp to the next. When the lamp is on, the parchment takes on a warm glow and the stitching reads as a fine dark line tracing the shade's outline.The compact footprint makes it an easy fit on a nightstand, desk, console or sideboard, even one already holding books and objects. A brass knob on the base turns it on and off.Details Shade: Tapered parchment, hand cross-stitched along each edge Base: Brushed stainless steel with brass control knob Dimensions: 50 cm (19.7") high, 16 cm (6.3") wide Cord length: 180 cm Switch: Brass knob on the base

This lamp is a glowing column wrapped in layered fabric, its surface carrying a textured, fossil-like grain that catches the light from within. A dark, architectural base anchors the form and gives the soft body something firm to rest on.At just under 45 inches tall, it sits lower than a typical floor lamp and behaves more like a lit object than a reading light. The fabric diffuses the light into a calm, warm ambient glow, which suits a spot beside low seating or a quiet bedroom corner. Because the fabric surface is layered by hand, each lamp shows small differences in grain and tone.Details Dimensions: 16 in diameter × 44.75 in high (Ø40.6 × H113.7 cm) Materials: Stainless steel structure with a hand-layered fabric surface Finish: Surface grain and tone vary slightly from piece to piece Light: Diffused ambient glow, 2700K warm white by default Weight: Approximately 14.5 kg (about 32 lb) Use: Dry indoor locations only

A softly glowing dome of natural alabaster sits atop a ribbed stainless-steel column, pairing the warmth of stone with a crisp, architectural base. Switched on, the shade reveals the clouding and veining unique to its stone, casting a gentle ambient light across the room.At just under five feet tall with a compact footprint, it settles easily into a living room corner, beside a bed or in an entry where the lit dome can be appreciated. Because alabaster is a natural material, the veining, opacity and color of each shade will differ from the next.Details Dimensions: W 46 cm × H 146 cm (18.1 × 57.5 in) Materials: Natural alabaster shade, ribbed stainless-steel column Weight: Approximately 13 to 18 kg Bulbs: 2 × E26 (E27 configuration available for other regions) Color temperature: 2700K warm white by default Dimming: Standard version is not dimmable; a dimmable version can be requested Use: Dry indoor locations only Natural variation: Veining, opacity and color vary from piece to piece

Raw quartz plates are stacked vertically and lit from behind, so the light travels through the stone itself. Cloudy patches and natural inclusions show up as soft variations in brightness, giving the panel an uneven, living glow that reads as material rather than fixture.Each plate is hand selected, which means translucency, inclusions and the way the layers sit together change from one sconce to the next. It works best as a focal point in a hallway, along a stair wall, in a spa or in any room where natural stone sets the tone.Details Material: Hand-selected raw quartz plates, layered vertically Dimensions: 58 cm (22.8") high x 13 cm (5.1") wide Light source: Integrated LED backlighting Color temperature: Warm white, 2700K Weight: Approximately 5 to 8 kg (11 to 18 lb) Mounting: Fix into a stud or use reinforced anchors; professional installation recommended Variation: Every panel is unique due to natural stone

A slim, tapered rod of brushed stainless steel rises from the wall and ends in a lit crystal tip. The glow begins at the crystal and runs down the length of the metal, so the sconce reads on the wall as one clean vertical line.The brushed finish catches soft shadow along the rod instead of throwing back a flat shine, and the cut crystal scatters light where it meets the steel. At 50 cm it is slender but has real presence. It works well in a hallway, at an entry, along a staircase or in a niche. Mounted as a pair on either side of a doorway, it makes the most of that vertical form.Details Materials: Brushed stainless steel with a cut crystal tip Dimensions: 50 cm H x 11 cm W x 11 cm D (19.7 x 4.3 x 4.3 in) Weight: Approximately 1.8 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

A clear glass cylinder encloses a cast steel core, and the rough, forged surface of that core becomes the whole character of the sconce. Seen through the glass, the texture shifts as light moves across it, so no two pieces look quite alike.The glass is shaped by hand, which means slight variations in wall thickness are part of the piece. It gives soft, ambient light suited to hallways, bedrooms, dining rooms and studies, where mood matters more than task lighting.Details Materials: Cast steel core with forged texture, hand-formed clear glass cylinder Finishes: Antique copper or brushed chrome (listed as Copper and Silver). Other finishes may be specified at order Dimensions: 42 cm (16.5") high, 20 cm (7.9") wide, 12 to 14 cm (4.7 to 5.5") projection from the wall Weight: Approximately 3.2 to 4 kg (7 to 9 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount, indoor use

This floor lamp is composed of stacked forms in warm brass and bronze, rising into a calm, architectural column that casts a soft, even glow. At 170 cm tall, it holds its own in a living room corner or beside a reading chair in a study or bedroom.Give it some open floor and wall space so the layered silhouette can be appreciated from more than one side. Because the metal is finished by hand, tone and surface texture may vary slightly from piece to piece.Details Materials: Brass and bronze Estimated weight: Approximately 12 to 16 kg Light source: E27 socket for a warm LED bulb, 2700K recommended (bulb not included) Dimming: Works with dimmable bulbs Voltage: 110V to 240V, configured for your region Installation: Plug-in with in-line switch Use: Dry indoor locations only CareSet the lamp on a level surface before styling to keep it stable.

This flush mount is cut from a single block of Spanish alabaster, carved square and hollowed by hand until the walls are an even thickness. Because the stone is never joined, its veining wraps unbroken around all four sides and the corners have a carved, seamless finish. Each one is unique, and you can request heavier veining with strong mineral lines, a softer and milkier stone, or leave the selection to us.The lamps sit inside the hollowed block, so the whole piece glows and casts a soft ambient light. Warm 2700K light brings out honey and cream tones and draws the veining forward, while cooler light tends to make alabaster look grey. It sits close to the ceiling on a slim metal frame, which suits foyers, hallways, bedrooms, dressing rooms, powder rooms, and larger rooms where a chandelier would crowd the ceiling height. In kitchens or at a desk, pair it with task lighting.Details Material: Hand-carved Spanish alabaster, single block Frame finish: Gold (solid brass), black or silver; frame, ceiling plate and hardware carry the stone's weight Height: 12 cm (4.7 in) for all sizes 35 cm (13.8 in) square: 2 lamps, about 6 kg (13.2 lb), lights roughly 5 m² (50 sq ft); suited to closets, dressing rooms, powder rooms, bathrooms or a series along a hallway 45 cm (17.7 in) square: 3 lamps, about 10 kg (22 lb), lights roughly 9 m² (100 sq ft); suited to foyers, walk-in closets or main bathrooms with ceilings of 2.7 to 3 m (9 to 10 ft) 60 cm (23.6 in) square: 4 lamps, about 20 kg (44 lb), lights roughly 14 to 18 m² (150 to 200 sq ft); suited to great rooms, large bedrooms or open-plan spaces with ceilings of 2.4 to 2.7 m (8 to 9 ft) Light source: Warm white 2700K LED lamps recommended to keep heat in the stone low; bulbs not included Installation: Hardwired, mounts flush to the ceiling; fix to a joist or reinforced blocking, with reinforced blocking required for the 60 cm size. Have an electrician confirm the fixing. CareTurn the fixture off and allow the lamps to cool first. Dust the alabaster with a soft, dry cloth only and never apply water or cleaning products to the stone. Wipe the metal with a soft, dry cloth and skip any polish.

A broad square of natural travertine, 60 × 60 cm, that reads as much like a panel of stone as a light. The taupe, honeyed surface carries its own pattern of pores, so no two pieces look quite alike, and at this scale that natural variation becomes the main event. The stone is chosen free of holes and blemishes for a clean, even face.An integrated LED casts a warm 2700K glow with no bulb to change. It sits comfortably in a living room, bedroom, bathroom or hallway, and the waterproof option allows use outdoors in covered spots such as a porch, balcony or sheltered terrace, away from standing water.Details Material: Natural travertine, taupe tone Dimensions: 60 × 60 cm (23.6 × 23.6 in) Light source: Integrated LED, warm white 2700K, no replaceable bulb Options: Standard or waterproof version Installation: Hardwired; due to its size, secure into structural framing rather than plasterboard alone Placement: Indoors, or outdoors under cover with the waterproof option

Staggered panels of antiqued mirrored glass form a shimmering drum around the light source, held close to the ceiling by a solid brass frame in an antique finish. Each panel is antiqued by hand, so the clouding and depth of silvering vary across the fixture and from one piece to another. Because the panels are offset, reflections break into soft fragments, and the fixture keeps catching daylight long after the lamps are off.Light escapes between the panels and bounces around the room as gentle ambient glow, with a faint ripple across the ceiling. The mirror picks up the color of its light, so warm white at 2700K is recommended. At that temperature the silvering turns smoky and warm and the brass reads gold. At 20 inches across, it brings the presence of a chandelier to a bedroom, dressing room, dining room or wide hallway where the ceiling is too low for one.Details Materials: Hand-antiqued mirrored glass panels in a solid brass frame Finish: Antique brass, darker and softer than polished brass Dimensions: 20 in (50.8 cm) diameter, 12 in (30.5 cm) high Room size: Suited to rooms of roughly 10 x 10 ft to 13 x 13 ft, or a wide hallway Ceiling height: Best for ceilings of about 8 to 9 ft (2.4 to 2.7 m) Light: Lamps housed inside the mirrored drum; warm white 2700K recommended Installation: Hardwired, mounted flush to the ceiling CareSwitch off the fixture and let the lamps cool first. Dust the glass and frame with a soft dry cloth. Lift marks from the mirror with a microfiber cloth lightly dampened with water. Avoid polish on the brass.

A solid block of natural jade forms the body of this wall sconce. When lit, the stone takes on a soft inner glow, while light slips out along its upper and lower edges to brighten the wall above and below. The effect makes the block seem to hover just off the surface.Because each block is cut from real jade, no two are alike. Color, clouding and translucency shift from one piece to the next, so yours will have its own character and may differ from the photos. It suits hallways, bedsides, fireplace walls and hotel corridors, anywhere a quiet, low glow is wanted more than strong task light.Details Material: Genuine natural jade, with tone and translucency varying by piece Dimensions: 25 cm (9.8 in) H × 15 cm (5.9 in) W × 12 cm (4.7 in) D Projection from wall: 12 cm (4.7 in) Light source: Integrated LED module, approximately 6 to 7W Output: Approximately 550 to 600 lumens, warm white at 2700K Dimming: Not dimmable Weight: Approximately 4 kg Installation: Hardwired to a wall junction box; a licensed electrician is recommended. Choose anchors and screws suited to your wall type and the weight of the stone. Suggested height: Fixture center at roughly 60 to 66 in (152 to 168 cm) above the floor in hallways or beside a bed; it can also sit lower as an accent on a fireplace wall Use: Dry indoor locations

A solid wood stem leans out from a weighted iron base and carries a fabric shade well past the footprint of the lamp. With a 90 cm (35.4 in) reach, the light lands over the arm of a sofa, a reading chair or the edge of a bed, so you can read without a side table underneath.The stem comes in walnut or ash. Because it is solid wood, grain and tone vary from one lamp to the next, and the surface deepens slowly as it ages.Details Height: 180 cm (70.8 in) Reach: 90 cm (35.4 in) Stem: solid walnut or solid ash Base: weighted iron Shade: fabric, with fabric choice available Light source: one E27 socket (E26 for North America), bulb not included Suggested color temperature: warm white, 2700K Coverage: lights an area of roughly 15 m² Voltage: 110 to 240V, configured for your region Weight: approximately 8 to 12 kg Use: dry indoor spaces only

A solid wood column tapers gently from base to top and carries a soft linen shade, giving this floor lamp a calm, grounded presence. The proportions are restrained in the Japandi spirit, so the wood grain and the glow through the linen do most of the talking.Three heights let you match the lamp to the room. The shortest sits comfortably beside low seating or a bed, while the taller versions add more vertical reach in a generous living room. Because the column is real wood, grain, knots and tone differ from one lamp to the next, so each piece has its own character.Details Heights: 120 cm (47.2 in), 150 cm (59.1 in) or 170 cm (66.9 in) Materials: Solid wood column with linen shade Natural variation: Grain, knots and tone vary from piece to piece Weight: Approximately 6 to 10 kg, depending on height Bulb: 1 x E26 (configured as E27 where required) Color temperature: 2700K warm white by default Use: Dry indoor locations only

This floor lamp pairs a tall solid-wood base with a natural fabric shade, giving it a calm, sculptural outline and a warm sense of proportion. The shade diffuses the light into a soft ambient glow rather than a focused beam, so it settles easily into a room in the evening.At 30 cm wide, it takes up very little floor space. It fits neatly into a bedroom corner, next to a sofa or alongside a favorite reading chair. Because the base is wood and the shade is textile, each lamp shows its own slight variations in grain and weave.Details Dimensions: W30 × H162 cm (11.8 × 63.8 in) Materials: Solid wood base, fabric shade Weight: Approximately 5 to 8 kg Bulb: 1 x E26 (configured as E27 where required) Default color temperature: 2700K warm white Use: Dry indoor locations only Natural variation: Wood grain and textile texture differ slightly from piece to piece

This lamp is built around a single column of solid wood, turned smooth and left plain so the grain does the talking. A conical fabric shade sits above it and softens the light into a warm, even glow. Because each column comes from solid timber, no two grain patterns match, and the wood tone will deepen gradually over the years.It comes in two sizes. The floor version sits comfortably beside a sofa or armchair for reading, while the table version fits a console, nightstand or desk. Used together in one room, the two read as a matched pair.Details Floor lamp: 135 cm (53.1 in) high, 55 cm (21.6 in) wide, approximately 6 to 9 kg Table lamp: 50 cm (19.6 in) high, 39 cm (15.3 in) wide, approximately 3 to 4.5 kg Materials: turned solid wood body, fabric shade Light source: one E27 bulb (E26 for North America), bulb not included Recommended bulb: warm white, 2700K Voltage: 110 to 240V, configured for your region Use: dry indoor locations only

A slender column of faceted K9 crystal in a smoky amber shade, this sconce scatters light into fine glints across the wall. The tint adds warmth of its own, so the glow reads like honey when paired with warm white bulbs.The shorter 53 cm version sits comfortably beside a bed, in a powder room or as a pair flanking a mirror. The 90 cm version carries the eye upward along a stairwell, a long hallway or a tall entrance.Details Material: Hand-cut K9 crystal Color: Smoked amber Width: 20 cm (7.9") Heights: 53 cm (20.9") or 90 cm (35.4") Weight: About 3.5 kg (8 lb) at 53 cm, about 5.2 kg (11 lb) at 90 cm Bulb type: E14 sockets (E12 for North America) Recommended bulbs: Warm white, 2700K Installation: Hardwired Use: Indoor

This round wall light is cut entirely from natural marble, with both the body and the shade shaped in stone. An integrated LED sits behind the surface, so when it is switched on the light passes gently through the marble and brings its veining forward.At 28 cm across, the disk gives a focused, considered light that suits artwork, architectural details, hallways, stairs and bathrooms. Because every piece comes from its own block of stone, the pattern of veining on yours will be its own.Details Size: Ø28 cm Material: natural marble body with stone shade Light source: integrated LED, no bulb to replace Color temperature: warm, neutral or cool Control: wall switch, remote, compatible with voice control Voltage: 110V or 240V, configured for your region Weight: approximately 4 kg Use: indoor only, not waterproof Note: natural veining varies from piece to piece