Lighting

Three tall ceramic shades hang in a row from a solid brass frame, each one hand-cast and left unglazed so the light passes through as a soft, creamy glow. Because every shade is cast by hand, expect slight variations in tone and texture from one to the next.Integrated LEDs sit out of sight inside the shades, giving even, warm light with no visible bulbs and no glare bouncing off a polished tabletop. At 73 cm wide, the fixture is well proportioned for a dining table of roughly 140 to 180 cm (55 to 71") or a kitchen island of a similar length.Details Materials: hand-cast unglazed ceramic shades, solid brass frame Overall width: 73 cm (28.7") Overall height: 85 cm (33.5") Shade size: 37 cm (14.6") high, 23 cm (9") wide Light source: nine integrated 5W LEDs, warm white 2700K Weight: about 11.5 kg (25 lb) Recommended hanging height: shades 75 to 90 cm (30 to 35") above the table or island Installation: have your electrician confirm the ceiling box is rated to carry the fixture's weight

This close-to-ceiling chandelier gathers cut crystal rods beneath a series of brass discs that step down in tiers. It brings the glitter of a hanging chandelier to rooms where a long drop would crowd the ceiling, such as a bedroom, a hallway or an entry.The lamps sit among the crystal, so their light is scattered by each faceted rod into a bright, sparkling ambient glow that dots the surrounding walls and ceiling. Warm white light at 2700K is intended here: it lets the clear crystal pick up a golden tone that complements the brass, where cooler light would read cold. For reading or kitchen work, pair it with dedicated task lighting.At 66 cm across, it suits rooms of roughly 4 x 4.5 m (13 x 15 ft) or larger, as well as generous entrance halls and hospitality entries. Its 36 cm height keeps headroom clear under ceilings of 2.4 to 2.7 m (8 to 9 ft).Details Materials: precision-cut K9 crystal rods on tiered brass discs in a warm gold finish Dimensions: 66 cm (26 in) diameter x 36 cm (14.2 in) high Recommended ceiling height: under about 2.7 m (9 ft) Light source: warm white LED, 2700K; bulbs not included Mounting: flush or semi-flush to the ceiling, no rod or chain Weight: approximately 10 to 14 kg (22 to 31 lb) Installation: hardwired; should be secured by an electrician to a joist or reinforced blocking CareTurn off the fixture and allow the lamps to cool first. Dust the crystal with a soft dry cloth or feather duster, steadying each rod with your free hand. For a more thorough clean, apply a small amount of glass cleaner to a lint-free cloth and wipe the rods; do not spray the fixture directly. Clean the brass with a soft dry cloth only, without polish.

A round lantern of rice paper stretched over a ribbed frame, this pendant gives off a soft, even glow with the bulb hidden from view. The ribs cause the paper to catch light a little differently across its surface, and the slight irregularities you see are a natural part of the material.Sizes run from a compact 30 cm to a generous 140 cm. Smaller lanterns look good clustered at staggered heights above a dining table or down a stairwell. Mid sizes hold their own alone in a bedroom or living room, and the largest diameters fill a room with light.Details Shade: Rice paper over a ribbed frame Diameters: 30 cm (11.8"), 40 cm (15.7"), 50 cm (19.7"), 60 cm (23.6"), 70 cm (27.5"), 80 cm (31.5"), 100 cm (39.4"), 120 cm (47.2"), 140 cm (55.1") Cable length: 150 cm (59") Bulb: E27 socket (E26 for North America), warm white 2700K recommended Installation: Hardwired, for indoor use

A shallow drum of vertically fluted solid wood sits close to the ceiling, finished with a brass rim and a glass diffuser on the underside. Because the ribs are cut directly into the timber, the grain carries through each flute, and no two fixtures look quite alike.The brass edge gives the form a crisp outline, and the slim profile suits low ceilings in bedrooms, hallways, dressing rooms and entries. Warm 2700K lamping keeps the wood looking rich and honeyed rather than flat.Details Materials: Solid fluted wood, brass edge, glass diffuser Diameter: 30.5 cm (12 in) Depth: 11.4 cm (4.5 in) Light source: Two E12 bulbs (E14 outside North America) Recommended color temperature: 2700K warm white Installation: Hardwired, flush to the ceiling

This brass candelabra chandelier is built around a small central sphere, with fine arms sweeping outward and upward to candle cups fitted with tall sleeves. A single stem rises from the center to a round canopy on a link chain. With no glass or shades, the bare candle bulbs become the light itself, giving the fixture the quiet character of a classic candelabra drawn in a lean, modern line.The finish is a pale, warm gold with a fine granular sheen and a gentle antiquing, so it looks more like aged gilding than bright polished metal. It pairs naturally with ivory, linen, travertine and oak, and keeps its warmth against a white ceiling even when unlit. Because the arms are slim and widely spread, the piece can span a long table or a generous room while staying visually light.Details Material: Brass in a softly antiqued pale gold finish 6-light: Ø 124 cm (49"), 52 cm (20.5") high, approx. 6 to 8 kg (13 to 18 lb) 8-light: Ø 156 cm (61.5"), 52 cm (20.5") high, approx. 8 to 11 kg (18 to 24 lb) Overall drop: Adjustable from about 55 cm to 257 cm (21.5 to 101.25") Suspension: Link chain with round canopy, suitable for flat or vaulted ceilings Bulbs: Six or eight E12 candelabra bulbs (E14 outside North America), up to 40W each, not included Recommended bulbs: Clear or lightly frosted candle-shaped LED, warm white 2700K Installation: Hardwired by a qualified electrician Use: Indoors only Sizing and Placement The 6-light suits a dining table of roughly 200 to 240 cm (79 to 94"), a living room or an entry hall. The 8-light suits tables of 240 cm (94") or more, a great room or a double-height foyer. Above a table, set the candle cups 75 to 90 cm (30 to 35") over the surface. Where people walk beneath, allow at least 2.1 m (7 ft) of clearance. CareTurn the fixture off and give the bulbs time to cool before cleaning. Wipe the arms and sleeves gently with a soft, dry cloth. Avoid metal polishes and anything abrasive, as they can wear away the gold finish.

A slab of natural calcite sits upright in a solid brass frame, and when the lamp is on, light travels through the stone itself. What you see is the mineral's own banding, glowing from within.Every slab is cut by hand, so no two are alike. Clarity, banding and the way each piece holds light will vary, which gives each sconce its own character. The slim, vertical profile fits comfortably on a narrow wall, beside a bathroom mirror, next to a bed or along a hallway, and it looks especially good mounted as a pair.Details Materials: hand-cut natural calcite, solid brass frame Dimensions: 26 cm (10.2") high, 15.2 cm (6") wide, 14 cm (5.5") deep Light: warm white, 2700K Installation: hardwired wall mount Bathroom use: suitable beside a vanity in a dry, protected position

A slender column of solid wood wrapped in burl veneer rises to a broad fabric shade. Burl comes from the knotted, irregular growth on a tree trunk, so instead of straight lines the grain curls and eddies across the surface, and no two lamps carry the same pattern.Because burl only forms in small, unpredictable sections, it is used here as a veneer laid by hand over a stable solid wood core. The column keeps a compact square footprint, while the wide shade throws enough light to serve a sofa and chairs rather than a single corner. Set it in a living room, bedroom, study or guest room where the figure can be appreciated up close.Details Materials: hand-laid burl veneer over a solid wood core, fabric shade Dimensions: 160 cm (63 in) high, 35 cm (14 in) square Size option: also available at 140 cm high Weight: approximately 22 kg (48.5 lb) Light source: E27 socket, configured as E26 for North America Recommended bulb: warm white 2700K, which brings out the veneer figure Use: dry indoor locations only

This table lamp is built around a faceted wooden body dressed in burl veneer, topped with an angular shade that repeats the same crisp geometry. Each flat plane catches the swirling grain at a slightly different angle, so the figure reads as a continuous pattern wrapping around the base.Burl comes from the irregular, figured growth on a tree trunk. Here it is cut into veneer and applied by hand over a solid core, which means the markings on your lamp will be its own and cannot be duplicated on another. It sits comfortably on a console, beside the bed or on a study desk, and suits Japandi and mid-century interiors where a surface invites a closer look.Details Dimensions: 38 cm (15 in) wide, 56 cm (22 in) high Body: Faceted solid core with hand-laid burl wood veneer Shade: Angular, faceted to match the base Socket: E26 for North America, E27 elsewhere Recommended bulb: Warm white, 2700K, to bring out the grain Also available: Floor lamp version

A faceted column of solid wood, wrapped in burl veneer, rises to an angular shade in this floor lamp. Each flat face catches the swirling figure of the burl at a slightly different angle, so the pattern reads as one continuous surface as you move around it.Burl forms as a small, irregular growth on a tree trunk, which is why it is sliced into veneer and laid by hand over a solid core. No two columns share the same figure, and the grain on yours will be its own. The shade sends a warm pool of light downward while still giving a soft glow to the room, and the slim footprint sits easily beside a sofa or bed where an arc lamp would need more reach.Details Dimensions: 140 cm (55.1 in) high, 38 cm (15 in) wide Materials: solid wood core faced with hand-laid burl veneer Shade: angular, directing light downward with ambient spill Bulb: E27 socket (E26 for North America), 2700K warm white by default Weight: approximately 7 to 10 kg Use: dry indoor locations only Note: burl figure and grain direction vary naturally from lamp to lamp

A column of veined natural marble rises beneath a cone shade in blackened steel, pairing the soft movement of stone with a crisp, dark silhouette. Because every column is cut and polished from a different piece of marble, the veining on each lamp is its own.The cone directs light downward onto the tabletop instead of scattering it across the room, so the lamp works well for reading or writing. Its slim base needs very little surface area, which helps on a busy desk, console, library table or nightstand.Details Materials: natural veined marble column, blackened steel shade Height: 38.4 cm (15.1 in) Shade diameter: 32 cm (12.6 in) Base diameter: 7.5 cm (3 in) Bulb type: E14 (E12 for North America) Recommended light: warm white, 2700K Note: marble is a natural material, so veining varies from piece to piece

This chandelier gathers nineteen hand-blown glass globes around a single central hub. Its wide, shallow shape makes it a good fit over a dining table or kitchen island, or in an entry with a standard 9 ft ceiling where a taller fixture would feel crowded.The glass is clear and heavily seeded, with small air bubbles trapped in each sphere as it is blown. Because it is not frosted, the socket cup and bulb inside every globe stay visible and become part of the design. Each globe is formed by hand, so the bubble pattern differs from one sphere to the next. This variation is expected. The frame, stem and canopy are matte black stainless steel, chosen over plated iron so the finish resists pitting around the sockets in humid rooms.Details Dimensions: 27" (68.5 cm) diameter x 18.5" (47 cm) height, not including stem Glass: 19 hand-blown clear seeded glass globes Frame: Matte black stainless steel with radial arms, central sphere, rigid stem and round canopy Bulbs: 19 x E12 candelabra base, not included Suggested bulbs: Small globe (G16.5 / G50) or torpedo LED at 2700K. Clear bulbs show the filament through the bubbles, frosted bulbs give a softer, even glow. Use the same bulb in every socket. Dimming: Standard version is not dimmable. A dimmable version can be made if requested at the time of order. Installation: Attach to a ceiling outlet box and bracket rated for the fixture's weight. Hang the frame first, then fit the globes. Two people are recommended. Sizing guide: Suits a dining table about 40" to 54" (100 to 137 cm) wide, with the lowest globe 30" to 36" (76 to 91 cm) above the tabletop. Works in a room of roughly 13 x 14 ft (4 x 4.3 m). In walkways, allow at least 7 ft (2.1 m) of clearance below the lowest globe. CareDust the globes with a dry microfiber cloth, holding each sphere at its base instead of twisting it. Wipe the black stainless steel with a barely damp cloth only. Avoid solvents, abrasive cleaners and ammonia-based glass sprays, which can mark the finish over time.

This pendant takes a quiet, rounded shape and lets color carry it. The resin shade comes in an earthy brown or a soft grey, set on an iron fitting, and it casts a gentle, diffused glow that sits comfortably over a small dining table, beside a bed or above a study desk.Warm white light at 2700K is central to how it looks. Under that light the brown takes on the character of fired clay and the grey reads like smooth stone. For a longer table or a kitchen island, two or three hung in a row work well. Where you need focused light for cooking or reading, pair it with dedicated task lighting.Details Shade: Resin, in Brown or Grey Fitting: Iron Dimensions: 30 cm (11.8 in) wide, 46 cm (18.1 in) high Weight: About 3.5 kg (7.7 lb) Light: Warm white, 2700K, diffused Suspension: Cord, length adjusted to order to suit your ceiling Placement tip: Over a table, hang the bottom of the shade 75 to 90 cm (30 to 35 in) above the surface CareTurn the light off and allow it to cool first. Dust with a soft, dry cloth. For marks, wipe with a cloth lightly dampened with water and dry right away. Do not use solvents or abrasive cleaners on the resin.

A softly rounded shade of hand-textured resin in a warm earth brown, carried on an iron frame. The uneven, ridged surface picks up light along its contours, giving the pendant a quiet, organic character that pairs naturally with oak, linen, clay and lime-washed plaster.Light spills downward through the open base in a gentle pool while the shade itself stays dark and calm. It suits a bedside or reading corner on its own, or works in a cluster above a dining table. Over a kitchen island or desk, plan for additional task lighting.Details Materials: Textured resin shade, iron frame Color: Earth brown Sizes: 13.8" (35 cm) diameter or 17.7" (45 cm) diameter, both 10.2" (26 cm) high Sizing guide: The 13.8" fits a bedside, reading chair or small hallway, or works as a pair over a kitchen island. The 17.7" suits a round table of about 35 to 47" (90 to 120 cm), or a group of three over a longer table. Hanging height: Over a table, place the bottom of the shade 30 to 35" (75 to 90 cm) above the surface Suspension: 19.7" (50 cm) cable, adjustable on site; longer or shorter lengths available to order Mounting: Ceiling or wall Light source: One E26 socket (E27 outside North America); warm white 2700K LED recommended; bulb not included Weight: About 5.5 to 7.7 lb (2.5 to 3.5 kg) Installation: Hardwired; installation by a licensed electrician CareTurn off the light and allow it to cool before cleaning. Dust with a soft dry cloth or brush, reaching into the texture. The exterior can be wiped with a lightly damp cloth. Avoid solvents and abrasive cleaners on the resin.

A long, shallow oval of solid brass, this pendant is drawn out to follow the length of a kitchen island or dining table. Two slender brass rods suspend it from a rectangular brass canopy, and its low 15 cm (5.9 in) profile leaves the view across the surface open.The exterior of the shade is finished with a fine striated texture that picks up light along its length. The interior is kept smooth and bright, so the lamps tucked inside cast a focused, even light downward while the brass glows a warm gold. Warm white at 2700K is intended here: cooler light makes brass look flat and slightly green. In a large open-plan room, pair it with gentler ambient lighting elsewhere.Details Material: Solid brass shade, rods and canopy; textured exterior, smooth bright interior 4-light version: 120 cm (47.2 in) long; canopy 60 × 10 × 2.5 cm (23.6 × 3.9 × 1 in); approx. 7 to 10 kg (15 to 22 lb); suits tables or islands of about 180 to 220 cm (71 to 87 in) 6-light version: 153 cm (60.2 in) long; canopy 90 × 10 × 2.5 cm (35.4 × 3.9 × 1 in); approx. 9 to 13 kg (20 to 29 lb); suits tables or islands of about 220 to 280 cm (87 to 110 in) Shade height: 15 cm (5.9 in) Overall drop: 80 cm (31.5 in) with standard rods, suited to ceilings of about 2.4 to 2.6 m (8 to 8.5 ft); custom rod lengths available for other ceiling heights Recommended hanging height: Rim 75 to 90 cm (30 to 35 in) above the surface Light: Downward-facing sources concealed within the shade; warm white 2700K Installation: Hardwired; canopy should be secured by an electrician to a joist or reinforced blocking CareTurn the fixture off and allow the lamps to cool. Dust with a soft, dry cloth, moving in the direction of the texture. Avoid metal polish and abrasive cleaners, which can dull the finish and mark the brass.

A thick, hand-formed glass shade sits within a slim stainless steel frame, giving this compact sconce a dense, sculptural presence on the wall. Because each shade is shaped by hand, its thickness and the small marks within the glass differ slightly from one piece to the next, so no two are quite alike.The modest footprint works well where a larger fixture would feel crowded: flanking a vanity mirror, beside a bed or along a corridor. Choose the black frame for a crisp, graphic look, or brass for a warmer contrast against the glass.Details Materials: Hand-formed thick glass shade, stainless steel frame Finish options: Black or brass Height: 24 cm (9.4 in) Width: 14 cm (5.5 in) Projection from wall: 15 to 17 cm (5.9 to 6.7 in) Light: Warm white, 2700K Installation: Hardwired wall mount Placement: Suitable beside a vanity in a dry, protected spot away from direct water Finish selection: Specified before production

A ring of glass rests against a brass backplate, lit from inside so that the halo glows and casts a gentle circle of light onto the wall around it. The effect is quiet and graphic, drawing on Art Deco geometry without feeling like a period copy.The round silhouette reads best against a plain wall. Consider it beside a bed, along a hallway, in a powder room, or mounted as a pair on each side of a framed artwork.Details Materials: Glass and brass Dimensions: 29.2 cm (11.5") high, 26 cm (10.2") wide, 15 cm (5.9") deep Weight: Approximately 1.8 to 2.2 kg (4 to 5 lb) Bulb: E14 base Color temperature: Warm white, 2700K Installation: Hardwired wall mount

A capsule of hand-worked glass sits against a softly rounded brass backplate shaped like a smooth pebble. The glass keeps its natural bubbles and ripples, so when the lamp is on, light moves through it the way it moves through still water.Because each capsule is formed by hand, no two are quite alike in thickness, surface or the pattern of bubbles. A pair of small brass fasteners holds the glass in place and stays in view as part of the design. The gentle curve of the backplate reads softer than a squared plate, which makes it an easy fit beside a bed, along a hallway or in a living room. Mount one on its own or hang two as a pair.Details Materials: Brass backplate and fasteners, hand-worked glass capsule Dimensions: 25 cm (9.8") wide, 32 cm (12.6") high, 10 cm (3.9") deep Lamp base: E14, or E12 for North America Color temperature: Warm white, 2700K Installation: Hardwired wall mount Note: Bubbles, thickness and surface texture vary from piece to piece

A slab of natural crystal sits upright in a solid brass frame, and the lamp behind it shines straight through the stone. What you see when it is lit is the interior of the mineral itself: its banding, its clarity and the soft way it carries warm light.Every slab is cut by hand, so no two sconces look quite alike. The compact, vertical profile fits a narrow stretch of wall, a vanity mirror, a bedside or a hallway, and it looks its best mounted as a pair.Details Materials: natural hand-cut crystal and brass; each slab varies in clarity, banding and translucency Finish options: brass, black stainless steel or silver Dimensions: 10.2 in H x 6 in W x 5.5 in D (26 x 15.2 x 14 cm) Weight: approximately 2.8 to 3.5 kg Bulb: E12 base in North America, E14 in other markets; 2700K warm white recommended Installation: hardwired to a wall junction box; installation by an electrician Placement: for a vanity, mount one on each side of the mirror at roughly 60 to 65 in (152 to 165 cm), in a dry, protected position away from direct water and outside wet zones. Not waterproof. Also available: the same design in a triple configuration

A tall bell of clear hand-blown glass surrounds a slender solid brass frame, so the warm glow of a filament bulb stays fully on view. The upright metal structure gives the sconce a crisp architectural line, while the clear glass keeps it light and open. At the base, a small suspended glass sphere adds a quiet sculptural detail.Mounted in pairs, it frames a mirror, doorway or piece of art with real presence. It sits comfortably in modern, contemporary, industrial, art deco and transitional interiors. Because the glass is blown by hand, each shade carries slight variations of its own.Details Finish options: Brass or black (black version in stainless steel) Materials: Hand-blown clear glass, solid brass structure Dimensions: H59 × W19 × D18 cm Light output: 900 or 1200 lumens Voltage: 110V or 240V, configured for your region Installation: Hardwired Approximate weight: 2.8 to 3.8 kg Use: Indoor only

A carved half-dome of genuine alabaster sits within a slender brass frame, sending a soft wash of light both up the wall and down toward the surface below. As the light passes through the stone, its natural veining comes forward, giving each sconce a quiet, glowing character.Because alabaster is a natural material, the tone, veining and translucency vary from one shade to the next. The compact proportions suit a bedside, a hallway or either side of a vanity mirror, and a pair shows off the subtle differences between two stones especially well.Details Materials: Genuine alabaster shade, brass frame Alternate finish: Also available in black stainless steel Dimensions: 34 cm high x 10 cm wide x 11.5 cm deep (13.4 x 3.9 x 4.5 in) Weight: Approx. 2 kg Light source: E14 socket (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount Bathroom use: Standard version is intended for dry interiors; a bathroom version can be requested for vanity placements

Two concentric rings of alabaster panels form a round drum that hangs from slender braided stainless-steel cables beneath a solid brass canopy. When lit, the light travels through the stone on every side, so the whole drum glows with a soft, even warmth that spreads across the room and down onto the table.Alabaster is a translucent, gently clouded stone, and each panel carries its own veining. The panels are deliberately left unmatched, and you may choose heavier, lighter or random veining. Solid brass studs along the upper rim secure the panels and remain on view as a detail of the design. Against the ceiling the fine cables almost vanish, leaving the drum to appear suspended in the air.The stone reflects the color of the light inside it. With 2700K warm white lamps it reads as honey and cream, with the veining showing in amber and gray. Cooler light makes it look flat and grayish, so warm white is recommended.Details Materials: Spanish alabaster panels, solid brass canopy, hardware and studs, braided stainless-steel cables Diameters: 45 cm (17.7″), 60 cm (23.6″), 80 cm (31.5″), 100 cm (39.4″) Height: 22 cm (8.7″) for all sizes Cables: 120 cm (47.2″), adjustable; at full length the drum drops about 142 cm (56″) from the ceiling Bulbs: E14; 10 on the 45 cm, 12 on the 60 cm, 18 on the 80 cm, 24 on the 100 cm; bulbs not included Recommended lamps: warm white LED, 2700K Weight: about 10 kg (22 lb), 15 kg (33 lb), 25 kg (55 lb) and 37 kg (82 lb) respectively Installation: hardwired; the 80 cm and 100 cm sizes should be secured by an electrician to a ceiling joist or reinforced blocking instead of a standard junction box Sizing guide: 45 cm for round tables of roughly 80 to 100 cm (31 to 39″), bedrooms or hallways; 60 cm for tables of 100 to 130 cm (39 to 51″); 80 cm for tables of 130 to 170 cm (51 to 67″) or entry halls; 100 cm for tables of 170 to 220 cm (67 to 87″) or large living rooms Hanging height: over a table, place the bottom of the drum 75 to 90 cm (30 to 35″) above the surface Light: ambient; pair with dedicated task lighting over islands or desks CareTurn the fixture off and wait for the lamps to cool before cleaning. Because alabaster is soft and absorbent, clean it only with a dry, soft cloth or a feather duster, and keep liquids, sprays and cleaning products away from it. The brass also needs nothing more than a dry cloth; avoid metal polishes.

A hand-carved alabaster dome rests on a polished brass column in this table lamp. When lit, the stone filters light through its natural veining, giving a soft, warm glow with the gentle irregularity that only real stone produces.Because alabaster is a natural material, each dome has its own veining, color and translucency. Placed as a pair on either side of a bed, two lamps offer balance while each keeps its own character. It also sits comfortably on a console or a living room side table.Details Shade: Carved natural alabaster dome Base: Polished brass column Dimensions: 30 cm (11.8 in) diameter, 50 cm (19.6 in) height Light: Warm white, 2700K Note: Veining, color and translucency vary from piece to piece

Blue stained glass, set into a shallow frame that sits close to the ceiling, gives this flush mount a deep, jewel-like glow. The leaded panels hold color in the light rather than flattening it, and the low profile makes the fixture a good fit for rooms with standard or lower ceilings.Every panel is hand cut and leaded, so the pattern and the intensity of the blue will differ slightly from one fixture to the next. The 40 cm size sits well in a bedroom or entrance. The 50 cm has the presence for a dining room or a more generous hall.Details Shade: Hand-cut, leaded blue stained glass Sizes: 16 in (40 cm) or 20 in (50 cm) diameter Bulbs: 3 x E27 Recommended lamping: Warm white, 2700K, to keep the blue rich Installation: Hardwired, flush to the ceiling Use: Indoor

Two folded fabric panels sit inside a curved frame of brushed brass. The brass traces the bend of each panel, so in profile the pendant looks like a single sculpted fold instead of a shade hung from a stem. The upper panel carries a printed botanical textile in blue. Below it, a plain white panel holds the light.During the day the pattern does the work. After dark the white panel glows and softens the light, keeping the source out of sight so there is no glare from a seat or across the table. The LED is integrated, which means there are no bulbs to buy or change.Details Color: Blue printed botanical fabric with white lower panel Frame: Brushed brass Width: 75 cm (29.5") Shade: 45 cm (17.7") Overall height: 120 cm (47.2") standard; rod can be made shorter or longer to order Light source: Integrated LED, 900 to 1,200 lumens Ceiling plate: Round, 12 cm (4.7") diameter Installation: Hardwired to a ceiling junction box; have an electrician confirm the ceiling fixing can carry the weight Weight: Approximately 5 to 8 kg (11 to 18 lb) Sizing: Suits a dining table of roughly 150 to 200 cm (59 to 79"); hang the lower edge 75 to 90 cm (30 to 35") above the tabletop. At standard height it sits comfortably under ceilings of about 2.7 to 2.9 m (9 to 9.5 ft) Also available: White Use: Dry indoor rooms only CareDust the brass and fabric with a dry microfiber cloth or soft brush. Keep water and cleaning products away from the fabric panel.