Glass Lighting
Blown, cast and pressed glass lighting in clear, amber, opal and textured finishes.
A long, slender frame carries stepped rows of clear prismatic glass, each faceted to break light into sparkle and depth as you move around the room. The silhouette borrows the layered geometry of Art Deco and resolves it into something clean and current, sized to run the length of a dining table or kitchen island.The glass reads best under warm light. With 2700K lamps the facets glow a soft gold, while cooler light makes them look icy, so warm white is part of the intended effect. The light it gives is bright and lively along the table; over an island, plan on separate task lighting for food prep.Details Lengths: 80 cm (31.5 in), 100 cm (39.4 in), 120 cm (47.2 in), 150 cm (59.1 in) Height: 42 cm (16.5 in) for all sizes Finishes: gold or silver in brass; black in stainless steel with a black finish. Frame, canopy and chain match. Glass: clear faceted prismatic glass in stepped tiers Lamps: G9, warm white LED at 2700K, about 4 to 5 W each recommended Installation: hardwired; should be fixed by an electrician to a joist or reinforced blocking Sizing guide: 80 cm for tables about 140 to 160 cm (55 to 63 in) or a small island; 100 cm for tables about 160 to 180 cm (63 to 71 in); 120 cm for tables about 180 to 220 cm (71 to 87 in) or a standard island; 150 cm for tables about 220 to 260 cm (87 to 102 in) or a full-length island Hanging height: bottom of fixture 75 to 90 cm (30 to 35 in) above the surface; in walkways allow about 240 to 260 cm (7.9 to 8.5 ft) from floor to fixture CareTurn the fixture off and let the lamps cool first. Dust the glass with a soft dry cloth or feather duster. For a deeper clean, put a little mild glass cleaner on a damp microfiber cloth and wipe; never spray the fixture directly. Dust the frame with a soft dry cloth and skip polish.
This shallow, round chandelier layers olive glass tiles over a frosted glass diffuser, framed with brass details and hung from a vintage-style chain. The green is deep and muted, a shade that sits comfortably next to walnut, oak, leather, brass and warm neutral walls. Together the glass and metal give it a slightly retro, collected feel.Because the bulbs sit behind the frosted layer, their light is softened before it reaches the colored glass, producing a gentle ambient glow instead of a focused downlight. Warm white bulbs at 2700K bring out a rich green; cooler bulbs tend to flatten the color toward gray. Its low profile keeps views open across a dining room or entrance hall. Over a kitchen island or desk, plan on separate task lighting.Details Materials: olive glass tiles, frosted glass diffuser, brass details, vintage-style chain Sizes: 65 cm (25.6") or 80 cm (31.5") diameter Height (65 cm version): 16 cm (6.3") Chain: 50 cm (19.7") standard; the 65 cm version then drops about 66 cm (26") from the ceiling Bulbs: E14 sockets; warm white LED at 2700K recommended; bulbs not included Weight (65 cm version): about 6 to 9 kg (13 to 20 lb) Installation: hardwired; should be secured by an electrician to a joist or reinforced blocking, not a standard ceiling box Sizing guide: 65 cm for tables of roughly 110 to 150 cm (43 to 59") or rooms near 3.5 × 4 m (12 × 13 ft); 80 cm for tables of 150 cm (59") or more, larger living rooms or entrance halls Hanging height: over a table, aim for the bottom edge 75 to 90 cm (30 to 35") above the surface; with the standard chain, the 65 cm version fits dining ceilings of about 2.2 to 2.3 m (7.2 to 7.5 ft) CareTurn the fixture off and allow the bulbs to cool first. Routine dusting needs only a soft dry cloth or feather duster. For the glass, dampen a microfiber cloth, add a small amount of mild glass cleaner to the cloth itself and wipe gently, avoiding spraying the fixture directly. Keep the brass to a dry soft cloth, without polishes or abrasives.
A clear crackle-glass dome sits atop a slender aged-brass column on this tall floor lamp. Inside the dome, a compact brass fitting holds the bulbs, which stay in view through the fractured texture of the glass. When lit, the irregular surface breaks up reflections so the shade seems to shimmer with depth.The narrow stem and broad round base give the lamp a clean, architectural profile with a small footprint, easy to place beside a sofa, lounge chair or console, or in a hotel suite or reception area. The warm brass pairs naturally with walnut, dark wood, marble, travertine and leather, sitting comfortably in Art Deco and mid-century rooms.Details Dimensions: H 130 x W 35 x D 35 cm (H 51.2 x W 13.8 x D 13.8 in) Materials: Glass and brass Shade: Clear crackle-glass dome with an irregular fractured texture Finish: Aged brass on the body, stem, shade rim and base Bulbs: 2 x E27, configured as E26 for North America Format: Freestanding floor lamp for ambient and decorative light Use: Dry indoor locations only Style: Art Deco / mid-century modern
A curved arm in solid brass reaches out from the wall and holds a clear glass shade at its tip. Because the shade sits well forward of the backplate, the light lands on the page, the mirror or the path ahead instead of washing the wall behind it.That reach makes it a genuinely useful fixture beside a bed, next to a reading chair, along a hallway or flanking a vanity. Mounted in pairs on either side of a headboard, it looks especially settled. Since the bulb is visible through the clear glass, a warm filament lamp is a worthwhile choice.Details Finish: Brass or black (black version in stainless steel) Materials: Solid brass arm, clear glass shade Dimensions: W 18 cm (7.1") x H 41 cm (16.1") x D 22 cm (8.7") Weight: Approximately 2.5 kg (5.5 lb) Lamp: E27 socket (E26 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Installation: Hardwired, for indoor use
Brushed copper and amber-tinted glass come together in this wall sconce, the metal cool and matte against the honeyed warmth of the shade. When lit, the glass softens the bulb into a gentle, golden ambient glow that sits comfortably in a bedroom, living room or hallway.The copper is left to age naturally, so it will slowly deepen and develop a patina over the years. It suits contemporary, mid-century and industrial interiors alike.Details Materials: brushed copper, amber glass shade Dimensions: H 32 cm × W 27 cm × projection 29 cm Light source: E27 or E14 socket; warm LED bulb recommended (not included) Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Weight: approx. 2 kg Use: indoor only Finish note: copper will naturally patina over time
Each arm is bent into a soft, organic curve, polished by hand, and capped with a clear hand-blown glass shade. Because every shade is blown individually, its curve and wall thickness differ slightly from its neighbors, and the warm brass remains visible through the glass.The lamps sit inside their shades, so the light spreads gently across the full width of the fixture and falls as an even, ambient glow over a table. At just 38 cm (15") tall, it grows wide rather than deep, which makes it a good fit for rooms with modest ceiling heights. Warm white lamps at 2700K bring out the gold in the brass and the glow in the glass; cooler light can make the metal look greenish and the glass feel cold, so we recommend staying warm.Details Materials: solid brass arms, hand polished; clear hand-blown glass shades 6 lights: 56 cm (22") diameter x 38 cm (15") high, about 7 kg (15 lb); suits a round or square table of roughly 90 to 120 cm (35 to 47") 8 lights: 75 cm (29.5") diameter x 38 cm (15") high; suits a table of roughly 120 to 150 cm (47 to 59") 10 lights: 93 cm (36.6") diameter x 38 cm (15") high; suits a table of roughly 150 to 190 cm (59 to 75") or a living room 14 lights: 131 cm (51.6") diameter x 38 cm (15") high, up to about 18 kg (40 lb); suits a table of 200 cm (79") or longer, or a large open room Light source: G9 LED lamps, one per arm; 2700K warm white recommended Suspension: 50 cm (19.7") rod as standard, for an overall drop of about 88 cm (35"); suited to ceilings of about 2.4 to 2.6 m (8 to 8.5 ft) over a dining table Custom rod length: available to suit your ceiling height Placement: hang the bottom 75 to 90 cm (30 to 35") above a table surface; over a kitchen island, pair with task lighting Installation: hardwired; larger sizes should be secured by an electrician to a ceiling joist or reinforced blocking CareTurn the fixture off and let the lamps cool first. Dust the brass with a soft, dry cloth and avoid metal polish. Clean the shades with a damp microfiber cloth, applying a small amount of mild glass cleaner to the cloth rather than spraying the fixture.
This floor lamp pairs an open metal cage with a generous fabric shade, giving it an industrial character that still reads as soft and welcoming. Inside the cage sit three light points, and the wide shade above gathers their output into a warm, diffused glow.The frame carries a rich bronze finish with copper accents, with glass in the composition. At 150 cm tall, the 60 cm shade gives the lamp more visual width at the top than the slimmer cage below, so it sits comfortably beside a sofa, reading chair or desk where ambient light is wanted rather than a focused beam.Details Dimensions: H 150 cm (59 in), base diameter 28 cm (11 in), shade diameter 60 cm (23.6 in) Materials: bronze-finish metal with copper accents, glass, fabric shade Light source: 3 × E27 sockets (E26 for North America) Bulbs: warm LED recommended, 2700K warm white by default; bulbs not included Voltage: 110 to 240V, configured for your region Installation: plug-in with in-line switch Weight: approximately 6 to 8 kg Use: indoor only
A bubbled glass shade sits within a slim brass frame, and the air pockets trapped in the glass scatter the light as it passes through. The result is a softly mottled glow across the wall rather than a flat wash.Every shade is hand blown with the bubbles worked in, so no two carry quite the same pattern or density. It reads best where the glass can be seen up close, such as a hallway, dining room, bar or bedroom.Details Materials: Brass frame with hand-blown bubbled glass shade Dimensions: 50 cm (19.7") high, 18 cm (7.1") wide, 10 cm (3.9") deep Light: Warm white, 2700K Installation: Hardwired wall mount
The shades form a ring just below the ceiling. This keeps the fixture compact enough for rooms where a hanging chandelier would crowd the space.The fluting scatters the light from each lamp, so the glass glows evenly with very little glare. The result is soft ambient light that moves sideways and downward into the room. The glass is hand textured, so each shade differs slightly from the next. Warm white lamps at 2700K bring out a gold tone in the glass and the brass. Cooler light tends to make the glass look grey and the metal pale. For desks or kitchen counters, pair it with dedicated task lighting.Details Materials: solid brass arms, clear hand-textured fluted glass shades 3 heads: 61 cm (24") diameter x 32 cm (12.6") high, about 6 kg (13 lb). Suits a room of roughly 3 x 3 m (10 x 10 ft) 6 heads: 70 cm (27.6") diameter x 32 cm (12.6") high. Suits a room of roughly 3.5 x 4 m (12 x 13 ft) 8 heads: 87 cm (34.3") diameter x 32 cm (12.6") high. Suits a room of roughly 4 x 5 m (13 x 16 ft) 10 heads: 100 cm (39.4") diameter x 32 cm (12.6") high, up to about 14 kg (31 lb). Suits spaces of 5 x 5 m (16 x 16 ft) and larger Light source: one lamp per shade (3, 6, 8 or 10 depending on size). Warm white LED at 2700K recommended. Bulbs not included Mounting: hardwired semi-flush ceiling mount, well suited to ceilings of about 2.4 to 2.7 m (8 to 9 ft). Larger sizes should be secured to a joist or reinforced blocking Placement: over a dining table, center the fixture on the table CareTurn the light off and let the lamps cool before cleaning. Dust with a soft dry cloth while supporting each shade with your other hand. For a deeper clean, put a small amount of mild glass cleaner on a damp microfiber cloth and wipe the glass. Never spray cleaner directly onto the fixture. Clean the brass with a soft dry cloth only, and avoid metal polish and abrasive cleaners.
An amber glass shade sits against a solid brass body in this wall sconce, and the tinted glass gives the light a honeyed cast instead of a cool white. At 29 cm (11.4") of projection, it carries its glow well out into the room, so it works best where mood matters more than task lighting: a bedroom, a living room or a long hallway.For a sharper contrast, the same form is offered in black stainless steel.Details Materials: Solid brass body (black option in black stainless steel), amber-tinted glass shade Finish options: Brass, Black Height: 32 cm (12.6") Width: 27 cm (10.6") Projection from wall: 29 cm (11.4") Weight: Approximately 2 kg (4.4 lb) Bulb base: E27 (E26 for North America) Recommended light: Warm white, 2700K Voltage: 110 to 240V, configured for the destination Installation: Hardwired wall mount, indoor use
Layers of clear glass petals gather into a rounded cluster on a gold-finished iron frame, giving this chandelier a full, sculptural shape with a clear Art Deco influence. Since it measures the same in height as in width, it hangs as a solid volume of glass instead of a flat ring, and it shows best in rooms with generous height above it.Each petal varies a little in curve, edge and surface ripple, and clear glass makes those differences most visible. Light moves through the overlapping layers and bounces between them, producing a soft ambient glow, while the petal rims trace thin bright lines around the form. Warm white lamps at 2700K give the glass a candlelike tone. Cooler light tends to look harsh along the edges. Bulbs can be seen through clear glass, so frosted or opal LEDs give a quieter appearance than exposed filaments.Details Materials: clear glass petals on an iron frame with gold finish Medium: 65 cm (25.6") wide x 65 cm (25.6") high, about 10 kg (22 lb), overall drop about 115 cm (45") on the standard rod Large: 80 cm (31.5") wide x 80 cm (31.5") high, up to about 18 kg (40 lb), overall drop about 130 cm (51") on the standard rod Suspension: 50 cm (19.7") rod with a plain canopy in matching finish Lamping: sixteen E14 sockets. Suggested: 2700K warm white LED, roughly 2 to 3 W each (175 to 275 lumens), totaling 2,800 to 4,400 lumens. Bulbs not included. Installation: hardwired. Because of the weight, an electrician should secure it to a joist or reinforced blocking, not to an ordinary ceiling box. Sizing guide: the Medium fits tables of about 110 to 150 cm (43 to 59") or rooms near 3.5 x 4 m (12 x 13 ft). The Large fits tables of 150 cm (59") or more, larger living rooms, entry halls and stairwells. Placement: above a table, leave 75 to 90 cm (30 to 35") between the surface and the bottom of the fixture. On the standard rod this works with ceilings of about 2.7 to 2.9 m (9 to 9.5 ft). The light is ambient, so pair it with task lighting over islands or desks. CareTurn off the fixture and wait until the bulbs have cooled. Remove dust with a dry soft cloth or feather duster, using your free hand to steady each petal. For a more thorough clean, put a small amount of mild glass cleaner onto a damp microfiber cloth and wipe the glass. Do not spray cleaner on the chandelier, and do not use abrasives on the gold finish. Dust collects more visibly on clear glass, so plan on dusting it a bit more often.
This chandelier gathers eighteen cherry glass spheres into a dense, sculptural cluster around a brass frame.The color is part of the glass itself, with milky and clear areas that soften and layer the light. Each globe varies slightly from its neighbors, and that variation is natural to blown glass. Under warm 2700K bulbs the cherry tone reads rosy and soft, while cooler bulbs wash it out, so warm white lamps are recommended. With eighteen lamps it can light a full dining or living room by itself, and a dimmer lets you bring it down for quieter evenings.Details Glass: Eighteen cherry glass globes with milky and translucent passages Frame: Brass Diameter: 90 cm (35.4") Body height: 80 cm (31.5") Sockets: 18, E14 or E12 depending on region (E12 for North America) Maximum wattage: 28W per lamp Bulbs: Not included; warm white 2700K recommended Dimming: Can be used with a dimmer Sloped ceilings: Can be fitted with a sloped ceiling adapter for pitched or vaulted ceilings Sizing and Placement Suits a dining table of about 135 to 180 cm (53 to 71") Allow 75 to 90 cm (30 to 35") between the tabletop and the lowest globe Over a table, works with ceilings from roughly 2.4 m (8 ft) Over a walkway, leave at least 2.1 m (7 ft) of headroom, which typically requires a ceiling near 3 m (10 ft) Taller spaces such as stairwells or double-height entries call for a longer rod InstallationThis is a heavy fixture. An electrician should check that the ceiling box can carry its weight, or add structural support if needed. Mount and wire the frame before attaching the glass globes individually.
A shallow drum of vertically fluted solid wood sits close to the ceiling, finished with a brass rim and a glass diffuser on the underside. Because the ribs are cut directly into the timber, the grain carries through each flute, and no two fixtures look quite alike.The brass edge gives the form a crisp outline, and the slim profile suits low ceilings in bedrooms, hallways, dressing rooms and entries. Warm 2700K lamping keeps the wood looking rich and honeyed rather than flat.Details Materials: Solid fluted wood, brass edge, glass diffuser Diameter: 30.5 cm (12 in) Depth: 11.4 cm (4.5 in) Light source: Two E12 bulbs (E14 outside North America) Recommended color temperature: 2700K warm white Installation: Hardwired, flush to the ceiling
This chandelier gathers nineteen hand-blown glass globes around a single central hub. Its wide, shallow shape makes it a good fit over a dining table or kitchen island, or in an entry with a standard 9 ft ceiling where a taller fixture would feel crowded.The glass is clear and heavily seeded, with small air bubbles trapped in each sphere as it is blown. Because it is not frosted, the socket cup and bulb inside every globe stay visible and become part of the design. Each globe is formed by hand, so the bubble pattern differs from one sphere to the next. This variation is expected. The frame, stem and canopy are matte black stainless steel, chosen over plated iron so the finish resists pitting around the sockets in humid rooms.Details Dimensions: 27" (68.5 cm) diameter x 18.5" (47 cm) height, not including stem Glass: 19 hand-blown clear seeded glass globes Frame: Matte black stainless steel with radial arms, central sphere, rigid stem and round canopy Bulbs: 19 x E12 candelabra base, not included Suggested bulbs: Small globe (G16.5 / G50) or torpedo LED at 2700K. Clear bulbs show the filament through the bubbles, frosted bulbs give a softer, even glow. Use the same bulb in every socket. Dimming: Standard version is not dimmable. A dimmable version can be made if requested at the time of order. Installation: Attach to a ceiling outlet box and bracket rated for the fixture's weight. Hang the frame first, then fit the globes. Two people are recommended. Sizing guide: Suits a dining table about 40" to 54" (100 to 137 cm) wide, with the lowest globe 30" to 36" (76 to 91 cm) above the tabletop. Works in a room of roughly 13 x 14 ft (4 x 4.3 m). In walkways, allow at least 7 ft (2.1 m) of clearance below the lowest globe. CareDust the globes with a dry microfiber cloth, holding each sphere at its base instead of twisting it. Wipe the black stainless steel with a barely damp cloth only. Avoid solvents, abrasive cleaners and ammonia-based glass sprays, which can mark the finish over time.
A thick, hand-formed glass shade sits within a slim stainless steel frame, giving this compact sconce a dense, sculptural presence on the wall. Because each shade is shaped by hand, its thickness and the small marks within the glass differ slightly from one piece to the next, so no two are quite alike.The modest footprint works well where a larger fixture would feel crowded: flanking a vanity mirror, beside a bed or along a corridor. Choose the black frame for a crisp, graphic look, or brass for a warmer contrast against the glass.Details Materials: Hand-formed thick glass shade, stainless steel frame Finish options: Black or brass Height: 24 cm (9.4 in) Width: 14 cm (5.5 in) Projection from wall: 15 to 17 cm (5.9 to 6.7 in) Light: Warm white, 2700K Installation: Hardwired wall mount Placement: Suitable beside a vanity in a dry, protected spot away from direct water Finish selection: Specified before production
A ring of glass rests against a brass backplate, lit from inside so that the halo glows and casts a gentle circle of light onto the wall around it. The effect is quiet and graphic, drawing on Art Deco geometry without feeling like a period copy.The round silhouette reads best against a plain wall. Consider it beside a bed, along a hallway, in a powder room, or mounted as a pair on each side of a framed artwork.Details Materials: Glass and brass Dimensions: 29.2 cm (11.5") high, 26 cm (10.2") wide, 15 cm (5.9") deep Weight: Approximately 1.8 to 2.2 kg (4 to 5 lb) Bulb: E14 base Color temperature: Warm white, 2700K Installation: Hardwired wall mount
A capsule of hand-worked glass sits against a softly rounded brass backplate shaped like a smooth pebble. The glass keeps its natural bubbles and ripples, so when the lamp is on, light moves through it the way it moves through still water.Because each capsule is formed by hand, no two are quite alike in thickness, surface or the pattern of bubbles. A pair of small brass fasteners holds the glass in place and stays in view as part of the design. The gentle curve of the backplate reads softer than a squared plate, which makes it an easy fit beside a bed, along a hallway or in a living room. Mount one on its own or hang two as a pair.Details Materials: Brass backplate and fasteners, hand-worked glass capsule Dimensions: 25 cm (9.8") wide, 32 cm (12.6") high, 10 cm (3.9") deep Lamp base: E14, or E12 for North America Color temperature: Warm white, 2700K Installation: Hardwired wall mount Note: Bubbles, thickness and surface texture vary from piece to piece
A tall bell of clear hand-blown glass surrounds a slender solid brass frame, so the warm glow of a filament bulb stays fully on view. The upright metal structure gives the sconce a crisp architectural line, while the clear glass keeps it light and open. At the base, a small suspended glass sphere adds a quiet sculptural detail.Mounted in pairs, it frames a mirror, doorway or piece of art with real presence. It sits comfortably in modern, contemporary, industrial, art deco and transitional interiors. Because the glass is blown by hand, each shade carries slight variations of its own.Details Finish options: Brass or black (black version in stainless steel) Materials: Hand-blown clear glass, solid brass structure Dimensions: H59 × W19 × D18 cm Light output: 900 or 1200 lumens Voltage: 110V or 240V, configured for your region Installation: Hardwired Approximate weight: 2.8 to 3.8 kg Use: Indoor only
Blue stained glass, set into a shallow frame that sits close to the ceiling, gives this flush mount a deep, jewel-like glow. The leaded panels hold color in the light rather than flattening it, and the low profile makes the fixture a good fit for rooms with standard or lower ceilings.Every panel is hand cut and leaded, so the pattern and the intensity of the blue will differ slightly from one fixture to the next. The 40 cm size sits well in a bedroom or entrance. The 50 cm has the presence for a dining room or a more generous hall.Details Shade: Hand-cut, leaded blue stained glass Sizes: 16 in (40 cm) or 20 in (50 cm) diameter Bulbs: 3 x E27 Recommended lamping: Warm white, 2700K, to keep the blue rich Installation: Hardwired, flush to the ceiling Use: Indoor
Two stacked glass spheres rise beneath a broad dome shade in this table lamp, with a mottled green and white pattern flowing through every curve. Brass-finished metal details frame the glass and add a warm counterpoint to its cool, painterly coloring.The glass is blown by hand in the Murano tradition, so the mottling, the thickness of the walls and the joint between the spheres vary from lamp to lamp. At 60 cm tall it carries real presence on a living room side table, an entry console or anywhere it can be admired from a distance.Details Material: Hand-blown glass with brass-finished metal detailing Form: Double-sphere body with wide dome diffuser Color: Mottled green and white Dimensions: 43 cm (16.9") wide, 60 cm (23.6") high Light: Warm white, 2700K
Stacked squares of natural marble frame an opal diffuser in this wall sconce. Each layer steps a little farther from the wall than the one behind it, so light slips out through the gaps between the stone rather than from one opening, drawing a soft stepped pattern on the surrounding surface.Because every layer is cut from real stone, the veining shifts from one square to the next and no two fixtures look quite alike. Choose red, black or brown marble. It reads best where the shadow detail can be seen up close, such as beside a bed, along a hallway or in a living room.Details Material: Natural marble layers with an opal diffuser Stone options: Red, black or brown Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining varies between layers and between pieces
Smoky black glass sits within a dark stainless steel frame, giving this wall sconce a graphic, slightly moody presence. When lit, the tinted shade softens the bulb into a warm, low glow that feels intimate rather than bright.Its clean lines work comfortably in contemporary, mid-century and industrial interiors. Mount one beside a bed, use a pair to flank a mirror, or run a series along a hallway.Details Dimensions: H 32 cm × W 27 cm, projects 29 cm from the wall Materials: stainless steel frame, black glass shade Light source: E27 or E14 socket, warm LED bulb recommended (bulb not included) Voltage: 110V or 240V, configured for your region Installation: hardwired wall mount Weight: approx. 2 kg Indoor use only
A tall bell of clear, hand-blown glass hangs from a slender metal frame, with a small glass sphere suspended inside it. Because the bell is fully transparent, the lamp becomes part of the design, and a warm filament bulb gives the best result.Each bell is shaped by hand, so expect variation in wall thickness, tiny bubbles and subtle differences in form from one piece to the next. At nearly two feet tall, the sconce sits well along a hallway or stair wall, beside a doorway, or flanking a mirror. It looks especially good installed in pairs.Details Dimensions: 59 cm (23.2") high, 19 cm (7.5") wide, 18 cm (7.1") deep Materials: Hand-blown clear glass bell and inner sphere, metal frame Finishes: Black stainless steel or bronze Bulb: E14 socket (E12 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Weight: Approximately 2.8 to 3.8 kg (6 to 8 lb) Installation: Hardwired wall mount, indoor use
Ribbons of textured green glass curve and overlap around a brass frame, giving this sconce the presence of a small sculpture on the wall. Because each glass ribbon is shaped by hand, the layering and the intensity of the green vary slightly from one sconce to the next.With the lights off, it reads as a piece of colored glass. Switched on, the overlapping layers diffuse the two bulbs into a soft, jewel-toned glow. It suits a bedroom, a dressing room or a hallway, and a pair works well flanking a mirror where you want color instead of a neutral fixture.Details Materials: Textured green glass over a brass frame Width: 12 in (30.5 cm) Light source: Two E12 bulbs (E14 outside North America) Recommended bulbs: Warm white, 2700K, which keeps the green tones warm Installation: Hardwired wall mount Coordinating pieces: Also offered as a chandelier and a candelabra