Wall Sconces
Made to order in your size, material and finish. Delivered across Panama and the United States.
Panes of antiqued mirrored glass in varying sizes are set around an iron and brass frame, giving this wall sconce a faceted silhouette with a Moroccan influence. The glass has a soft, aged reflection that catches the light and scatters it gently across the wall.The frame is finished in Antique Copper with a measured sheen, so the piece reads warm rather than flashy. It suits a hallway, a bedside wall or a powder room where you want a quiet glow with some texture.Details Materials: Iron and brass frame with antiqued mirrored-glass panes Finish: Antique Copper Dimensions: 10.25" W x 5.5" D x 21.25" H Diameter: 5.5" Weight: 5.17 lbs Sockets: 1 Bulb type: E26, 40 watts; energy-saving LED bulbs recommended Installation: Hardwired; professional installation recommended Mounting hardware: Included Use: Indoors, away from excess moisture and water
A compact wall sconce in a brass frame, holding clear crystal glass that catches and scatters the light from its integrated LED source. The glass is Murano crystal, so the fixture reads as bright and faceted even at modest sizes, which suits a bedside wall or a quiet hallway.Two sizes are available: a taller, slimmer profile and a wider, lower one, so you can match the sconce to the proportions of the wall or the furniture beside it.Details Frame finish: Brass Glass: Clear crystal glass Materials: Murano crystal glass, metal Sizes: 5" W x 11" H, or 9.25" W x 6.7" H Light source: Built-in LED Voltage: 110V Installation: Hardwired; installation by a licensed electrician is required
Faceted crystal is set around a sculpted resin body in this compact wall sconce. As the light passes through, the crystal scatters it into fine points of sparkle, while the resin gives the fixture a solid, grounded shape.At 6 inches wide and 12 inches high, it brings the glint of crystal to places where a larger fixture would overwhelm, such as beside a bed, along a hallway, on a dining room wall or in a powder room. It looks especially good mounted in pairs.Details Materials: Faceted crystal and sculpted resin Dimensions: 15.2 cm (6") W x 30.5 cm (12") H Light source: Integrated LED, warm white 2700K Weight: Approximately 1.5 to 2.5 kg (3 to 6 lb) Installation: Hardwired; mounts to a standard wall box Placement: Can be used beside a vanity in a dry, protected spot away from direct water
This wall sconce pairs a slender metal frame with clear crystal, giving a bedroom or hallway a soft, faceted glow. Three candelabra lights sit within the crystal, so the light scatters gently across the wall rather than landing in a single hard pool.The frame comes in brass or matte black. Brass reads warm and classic, while matte black gives the crystal a crisper outline against lighter walls.Details Materials: Metal frame with clear crystal Frame finishes: Brass or matte black Size: 12" W x 20" H Light source: 3 candelabra base (E12) bulbs, 60W max each, bulbs not included Compatible bulbs: LED, halogen, compact fluorescent and other energy-efficient E12 bulbs Voltage: 110V Installation: Requires installation by a licensed electrician
This wall sconce pairs faceted crystal shades with a clean, pared-back brass frame. The polygonal cuts catch and scatter light along their edges, while the slim round backplate keeps the fixture visually quiet on the wall.Two vertical versions hold a single shade at different heights, and two horizontal versions stretch wider across the wall. The tall formats sit well beside a bed or flanking a mirror, and the wide formats read nicely over a vanity or along a hallway.Details Materials: Brass with K9 crystal shades Finishes: Lacquered Burnished Brass, Matte Black, Polished Nickel 14 1/4" H: 5" W x 5" D x 14 1/4" H overall; shade 3 1/4" diam. x 8 1/2" H; backplate 4 1/2" diam. x 1/2" D; 6 lbs. 19 1/4" H: 5" W x 5" D x 19 1/4" H overall; shade 3 1/4" diam. x 13 1/2" H; backplate 4 1/2" diam. x 1/2" D; 7 lbs. 19 1/2" W: 19 1/2" W x 5" D x 5 1/4" H overall; backplate 5 1/4" diam. x 1/2" D; 9 lbs. 31" W: 31" W x 5" D x 5 1/4" H overall; backplate 5 1/4" diam. x 1/2" D; 12 lbs. Light sources: 1 or 2, depending on size Installation: Hardwired; installation by a licensed electrician is required
A faceted crystal shade hangs from a slim solid brass arm on an adjustable line, so the glass seems to float just off the wall. As the light passes through the cut facets, it scatters soft sparkle across nearby surfaces, giving a bedside, hallway or entry a quiet glow.Choose clear crystal for a bright, classic look, or smoke crystal for a deeper, moodier tone. The brass hardware comes in lacquered brass or matte black.Details Materials: Solid brass, K9 crystal Crystal options: Clear, smoke Finish options: Lacquered brass, matte black Lamp body: 2.75" D x 15" H Line length: 23.6", adjustable Back plate: 4" diameter, 1" deep Weight: 16 lbs Light source: 1 E26 bulb, included Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended Suggested rooms: Bedroom, living room, dining room, foyer, hallway
This two-light wall sconce pairs a gold metal frame with clear crystal spheres, each one faceted, ground and polished by hand so it catches the light and scatters it softly across the wall. The look draws on the pared-back confidence of 1960s design, with clean geometry and a gleaming finish that feels at home in a bedroom, a dining room or a hotel corridor.Lit, the crystal throws gentle points of brightness around the room. Unlit, the faceted forms still read as a sculptural accent against the wall.Details Overall size: 7.5" H x 14" W x 14" D Shade: 14" W x 14" D Canopy: 1" H x 12.5" W x 12.5" D Weight: 12 lb Materials: Metal and clear crystal Finish: Gold Light sources: 2 Bulbs: E12, 20W max each, included Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended
This torch-style wall sconce centers on a solid brass form suspended from a slender black cord, giving the fixture a lean, vertical presence on the wall. A faceted glass shade catches and scatters the glow from a recessed LED set at its top, producing a warm, softly broken light.Offered in three finishes, it suits bedrooms, living and dining rooms, foyers and hotel corridors, and works well flanking a bed or mirror.Details Materials: Brass, glass Finishes: Lacquered Burnished Brass, Polished Nickel, Matte Black Overall dimensions: 4.5" W x 4" D x 24.5" H Backplate: 4.5" diameter, 1.5" D Weight: 7 lbs Light source: One integrated 3W LED module, dimmable Color temperature: Warm white, 2700K Voltage: 110V to 220V available Mounting: Wall mount; not suitable for vaulted ceilings Installation: Requires a licensed electrician
Two faceted glass spheres sit along a slim metal frame in this wall sconce, a design rooted in the clean, pared-back lines of the 1960s. Each sphere is hand ground and polished so its facets catch the light and scatter it softly across the wall.The compact depth keeps it close to the wall, which suits hallways, bedsides and dining rooms, as well as hotel and restaurant interiors.Details Overall size: 17.25" H x 9" W x 4.75" D Canopy: 8" H x 5" W Weight: 4.4 lb Materials: Metal and faceted glass Finish: Gold (listing also references grey) Light sources: 2 Bulbs: G9, 20W max each, included Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended
This short wall sconce gathers dozens of faceted glass polyhedra, each hand-blown and hung from its own hook along a stepped steel frame. When lit from within, the facets catch and scatter the glow, casting shifting light across the wall around it.The glass comes in clear or smoke, and the frame comes in brass or bronze, so the sconce can read bright and crisp or softer and moodier. It suits living and dining rooms, bedrooms, foyers and hotel corridors.Details Size options: 19" and 30" Listed overall dimensions: 12" W x 7 1/2" D x 18" H Backplate: 4 3/4" W x 8 1/2" H Weight: 15 lbs Materials: Steel frame with hand-blown glass Glass: Clear or smoke Frame color: Brass or bronze Finishes also listed: Lacquered burnished brass, matte black, satin nickel Color temperature: Warm white, 2700K Dimmable: Yes Voltage: 110V to 220V available Installation: Requires a licensed electrician. Not suitable for mounting on a vaulted ceiling.
This wall sconce draws on the geometry of 1920s Paris Art Deco design. Hundreds of faceted glass prisms hang in dense rows from a welded iron frame, catching and breaking up the light so the wall around it glows with movement. The pairing of crisp angular glass with a sturdy iron structure gives it a refined but slightly industrial character.Three candelabra bulbs sit within the fringe of prisms, producing a warm, scattered light suited to bedrooms, living and dining rooms, hallways and entryways.Details Materials: Iron frame, faceted glass prisms Finishes: Lacquered Burnished Brass, Matte Black, Polished Nickel Overall dimensions: 13" W x 6.5" D x 15.25" H Backplate: 4.75" W x 0.75" D x 4.75" H Weight: 17 lbs Light source: 3 x E12 candelabra bulbs, max 15W each Color temperature: Warm white, 2700K Dimmable: Yes Voltage: 110V to 220V available Installation: Requires a licensed electrician; not suitable for vaulted ceilings
Two faceted glass spheres sit against a slim metal frame in this wall sconce, each one hand ground and polished so its cut surfaces catch the light and scatter it softly across the wall. The look draws on the pared-back sculptural lighting of the 1960s, with the crystal doing most of the decorative work.A tall canopy anchors the fixture and gives it a clean vertical line. It suits a dining room, bedroom or living room, and it works well in hotel and restaurant interiors too.Details Materials: Metal and glass Finish: Metal Overall size: 19.75" H x 8.75" W x 4.75" D Canopy: 13.25" H x 5.25" W Weight: 10 lb Light sources: 2 Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended
Two faceted glass spheres sit on a slim bronze-finished metal frame, each one hand ground and polished so its cut surfaces catch and scatter the light. The look draws on the pared-back design of the 1960s, with a sculptural profile that reads clearly on the wall even when the lamps are off.At just over 17 inches tall and under 5 inches deep, it works well flanking a bed, lining a dining room wall or lighting a hotel or restaurant corridor.Details Materials: Metal and glass Finish: Bronze Overall size: 17.25" H x 9" W x 4.75" D Canopy: 8" H x 5" W Weight: 4.4 lb Light sources: 2 Bulbs: G9, 20W maximum each, included Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended
Two faceted glass spheres sit along a slim metal frame finished in grey, catching light across their cut surfaces and scattering it softly onto the wall. Each sphere is ground and polished by hand, so the glass glints rather than glows flat. The look draws on the clean, pared-back lines of 1960s design.Its compact depth suits hallways, bedsides and dining rooms, and it works equally well in hotel and restaurant settings where a quiet sparkle is wanted.Details Materials: Metal and glass Finish: Grey Overall size: 17.25" H x 9" W x 4.75" D Canopy: 8" H x 5" W Weight: 4.4 lb Light sources: 2 Bulbs: G9, 20W max each, included Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended
Six faceted panels of hand-cut crystal wrap this wall sconce, catching the light from every angle and scattering soft color across the wall. Because each crystal side is cut by hand, no two pieces look exactly alike.The crystal is held in a stainless steel frame, giving the sconce a clean, polished base that lets the glass do the talking. It suits a bedside wall, a dining room or a hotel corridor where a little sparkle is welcome.Details Dimensions: 12" wide x 9.5" high Materials: Stainless steel and hand-cut crystal Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended Suggested settings: Bedrooms, living rooms, dining rooms, restaurants and hotels
This two-light wall sconce takes its cue from industrial gears, with spokes and open space alternating around a central form. Here the spokes become faceted hexagonal crystal glass pieces with softly rounded interiors, set along a clean, solid metal frame. Lit, the glass catches and scatters a warm glow.Its compact footprint suits a bedside wall, a hallway run or either side of a mirror. It comes in three finishes, so it can sit easily alongside warm brass, crisp nickel or darker, graphic interiors.Details Materials: Metal frame with crystal glass Finishes: Lacquered burnished brass, matte black, polished nickel Overall: 4 1/2" W x 5" D x 13" H Shade: 3 1/2" diameter, 6" H Backplate: 4 1/2" diameter, 1/2" D Weight: 8 lbs Light source: 2 x E12 base bulbs, 5W max each, dimmable Color temperature: Warm white, 2700K Voltage: 110V to 220V available Suggested rooms: Living room, dining room, bedroom, hallway, entryway Installation: Hardwired; requires a licensed electrician. Not suitable for mounting on a vaulted ceiling.
A compact wall light with a frame that pairs two metals, set around curved crystal that has been polished and cut into smooth oval facets. The facets catch the bulb and scatter it into soft, shifting light, while the clarity of the glass keeps the form looking open rather than heavy.Its small square backplate and modest depth suit hallways, beside a bed or flanking a mirror, and it comes in brass, bronze or polished nickel to sit comfortably with existing hardware.Details Finishes: Brass, Bronze, Polished Nickel Materials: Solid brass with crystal (listed as K9 cast crystal and as blown glass) Overall: 4 1/2" W x 6 1/2" D x 8" H Backplate: 4 1/2" square, 1/2" H Weight: 10 lbs Color temperature: Warm white 3000K standard, daylight 4000K available Dimmable: Yes Voltage: 110V to 240V Installation: Hardwired, assembly required, professional installation recommended
This wall sconce gathers faceted pieces of pink glass into a sculpted, many-sided form inspired by Venetian poliedri design. When lit, the angled panes catch and scatter the glow, softening it into a rosy wash across the wall with gentle reflections along each edge.A brass frame holds the glass and gives the piece a warm metallic accent. Mounted on either side of a bed or along a hallway, it adds color and a vintage sensibility without taking up much space. It is offered singly or as a matched set of two.Details Materials: Brass and glass Finish: Brass Glass color: Pink Size: 9.8 in (25 cm) diameter x 15.7 in (40 cm) high Options: Single sconce or set of 2 (two sconces packaged together) Voltage: Available in 110V to 240V Installation: Hardwired; professional installation recommended Suggested rooms: Bedroom, living room, dining room, foyer, hallway
A solid block of natural jade forms the body of this wall sconce. When lit, the stone takes on a soft inner glow, while light slips out along its upper and lower edges to brighten the wall above and below. The effect makes the block seem to hover just off the surface.Because each block is cut from real jade, no two are alike. Color, clouding and translucency shift from one piece to the next, so yours will have its own character and may differ from the photos. It suits hallways, bedsides, fireplace walls and hotel corridors, anywhere a quiet, low glow is wanted more than strong task light.Details Material: Genuine natural jade, with tone and translucency varying by piece Dimensions: 25 cm (9.8 in) H × 15 cm (5.9 in) W × 12 cm (4.7 in) D Projection from wall: 12 cm (4.7 in) Light source: Integrated LED module, approximately 6 to 7W Output: Approximately 550 to 600 lumens, warm white at 2700K Dimming: Not dimmable Weight: Approximately 4 kg Installation: Hardwired to a wall junction box; a licensed electrician is recommended. Choose anchors and screws suited to your wall type and the weight of the stone. Suggested height: Fixture center at roughly 60 to 66 in (152 to 168 cm) above the floor in hallways or beside a bed; it can also sit lower as an accent on a fireplace wall Use: Dry indoor locations
A slim oval of natural marble sits just forward of a brass backplate, held in place by two small pins so the stone appears to hover off the wall. The marble is cut thin enough for the integrated LED to glow through it, and the veining becomes the pattern once the light is on.Because the stone is natural, the cream and sand veins fall differently on every piece, and the thinner sections brighten first. At only 8 cm deep it sits close to the wall in a narrow hallway, and its height gives it enough presence beside a bed or a mirror. Mounted as a pair on either side of a vanity mirror at face height, it casts even, flattering light.Details Dimensions: 30 cm (11.8 in) H x 18 cm (7.1 in) W x 8 cm (3.1 in) D Materials: Genuine marble with a brass backplate; veining and tone vary naturally Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by an electrician Use: Indoor, dry locations only; beside a vanity, keep it outside wet zones Weight: Approximately 2.5 to 3.5 kg
This two-light sconce takes its shape from a flowering branch.The frame is solid iron, hand-finished in brass paired with amber crystal or bronze paired with smoke crystal. It sits comfortably beside a bed or flanking a bathroom mirror, where its warm glow and delicate silhouette can be appreciated up close.Details Finish options: Brass with amber, bronze with smoke Materials: Solid iron with hand-applied finish, crystal florals and drops Dimensions: 14" W x 8" D x 14" H Weight: 6 lbs Backplate: 4.25" diameter x 0.75" high Light source: Two E12 candelabra sockets, 40 watts max each; bulbs not included Cord: 8" black and white PVC cord Installation: Hardwired; professional installation recommended CareWipe gently with a soft, dry cloth. Avoid polishes and cleaning products, which can damage the finish.
A slender fluted column of alabaster rises from a brass mount in this wall lamp, giving the wall a quiet vertical accent. When lit, the stone glows from within and casts a soft, warm light suited to bedrooms, living rooms and hallways.Alabaster is a natural stone, so the veining and patterning on each shade is unique. The piece you receive will differ from the one pictured.Details Size: Diameter 7 cm x Height 38 cm (2.8 in x 15 in) Depth from wall: 15 cm (5.9 in) Materials: Brass body with alabaster shade Finish: Brass and white Quantity options: 1 piece or 2 pieces Color temperature: 3000K to 6000K Voltage: 110V to 220V available Installation: Hardwired; installation by a licensed electrician is required
The Borealis Flute sconce pairs a solid brass arm and backplate with a fluted crystal glass shade that catches and softens light along its carved ribs. Each shade begins as a single block of crystal, cast in a mold, slowly cooled, then lathe-engraved and polished by hand over as many as 25 days for a clear, bright finish.A single warm white bulb glows through the glass with a gentle, even light, and the fixture is dimmable for evening use beside a bed or along a hallway. Choose brass, bronze or nickel to suit the surrounding hardware.Details Materials: Solid brass and crystal glass Finishes: Brass, bronze, nickel Overall: 5 3/4" W x 7 1/4" D x 18" H Glass shade: 5 3/4" diameter, 9" H Backplate: 4" W x 1" D x 6 1/2" H Weight: 15 lbs Light source: 1 x E12 bulb, included Color temperature: Warm white 3000K Dimmable: Yes Voltage: 110V to 220V available Installation: Hardwired, assembly required; professional installation recommended Sloped ceiling compatible: Yes
A slim steel frame holds a molded glass dome shaped like a flute, giving this wall sconce a quiet, sculptural presence. Each glass dome is flame-polished by hand, and the steel is hand-finished in your choice of brass or bronze.Choose clear glass for a crisp, bright glow or amber glass for a warmer, softer light. The compact backplate keeps the profile tidy beside a bed, along a hallway or flanking a mirror.Details Frame: Hand-finished solid steel Finish options: Brass, Bronze Shade: Molded glass dome, flame-polished by hand Glass options: Clear, Amber Overall: 5 3/4" W x 7" D x 12 1/2" H Backplate: 4 1/2" diameter, 1/2" H Weight: 8 lbs Voltage: 110-120V Installation: Hardwired; requires installation by a licensed electrician CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.