Wall Sconces

A tall panel of natural alabaster set into a slender brass frame, this sconce sits just 7 cm from the wall and keeps its light source fully concealed. When it is on, the stone itself glows, giving a soft, even wash from top to bottom without a bright spot.Because alabaster is a natural material, each panel has its own veining and translucency, so no two pieces look quite alike. The shallow profile works well in a hallway, beside a bed in place of a table lamp, or flanking a vanity mirror. Mounted in a series along a corridor, the sconces read more like part of the wall than individual fixtures.Details Materials: Natural alabaster panel, metal body Finishes: Brushed brass or matte black Dimensions: 50 cm (19.7") high, 12 cm (4.7") wide, 7 cm (2.8") projection Weight: Approximately 2.8 kg (6 lb) Light source: Integrated LED, approximately 8W and 650 lumens Color temperature: Warm white, 2700K Installation: Hardwired

This wall sconce pairs a slender metal frame with a tall panel of natural alabaster. When lit, the stone glows softly from within, casting a warm, even light that suits a bedside wall or a quiet corner of a living room.Because alabaster is a natural stone, the veining and tone differ from one piece to the next, so your sconce will look slightly different from the photos.Details Sizes: Small 4.3"W x 23"H; Large 6"W x 31"H Materials: Metal and alabaster Light source: LED, included Color temperature: Warm white, 2700K or 3000K Voltage: 110V to 240V, selectable Installation: Hardwired; installation by a licensed electrician required Suggested rooms: Bedroom, living room, dining room, hotel and restaurant settings Custom options: Size, finish color, number of light sources, wire length

A tall column of alabaster set on a slim wall mount, this sconce glows along its entire length. Because the whole tube is lit, the natural veining reads as one continuous band of stone from top to bottom, with more of the pattern on show than a small shade could offer.Each tube is hand turned and finished from natural stone, so the veining, color and translucency vary from piece to piece. It sits well in a hallway, an entry or on a bedroom wall. Hung in pairs beside a bed or flanking a mirror, it casts a balanced column of light on each side.Details Material: Natural alabaster, hand turned and finished Dimensions: 54 cm (21.3") high, 15 cm (5.9") wide Weight: Approximately 1.6 to 2.2 kg (3.5 to 5 lb) Light: Warm white, 2700K Installation: Hardwired wall mount

A column of thick black textured glass wraps a stainless steel core in this tall wall sconce. Because the glass is cast, its surface scatters the light softly while still letting it through, and each column carries its own variation in texture and glow. By day the dark glass reads as a calm, sculptural form on the wall.At 50 cm tall, it sits comfortably in a hallway, beside a bed, in a living room or flanking a doorway, and it looks especially good installed as a pair. For balanced placement, mount the center roughly 150 to 160 cm (59 to 63 in) above the floor.Details Materials: Cast textured glass in black, stainless steel core Dimensions: 50 cm (19.7 in) H x 18 cm (7.1 in) W Lamping: E14 sockets (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Note: Cast glass means texture and light quality vary slightly from piece to piece

A tall column of carved crystal prisms rises from a slim solid brass frame, catching the light from a single G9 lamp and scattering it softly across the wall. At just over 27 inches high and under 5 inches wide, the sconce has a slender vertical presence that suits bedside walls, hallways and the space flanking a mirror or doorway.The brass is machined, hand polished and given a patina before a protective lacquer finish. Each crystal shade is hand carved and polished, so the facets read crisp and clear whether the light is on or off.Details Overall dimensions: 4.72" W x 6.1" D x 27.5" H Backplate: 4.5" diameter, 0.5" deep Materials: Solid brass, K9 crystal Finish: Lacquered brass Light count: 1 Bulb: G9 LED, 2W maximum, dimmable Color temperature: Warm white 3000K (standard) or daylight 4000K Installation: Hardwired; requires a licensed electrician

This slender wall sconce rises 27 inches in a column of solid faceted crystal, with the light source fully enclosed inside. Small solid brass connectors join the crystal sections, so the piece reads as a single glowing rod of cut glass. When lit, the facets break the light into soft points of sparkle across the wall.Its narrow two-inch profile suits tight spots such as either side of a bathroom mirror or a bed. It also works well in hallways, dining rooms and hotel interiors. The metal is offered in antique brass, matte black or polished nickel.Details Overall: 2" W x 2" D x 27.6" H Backplate: 3" W x 0.7" D x 5" H Weight: 8 lbs Materials: Metal and solid faceted crystal glass, with solid brass connectors Finishes: Antique Brass, Matte Black, Polished Nickel Light source: Integrated LED, 8 light points Output: 8 watt, 1582 lumens, 2700K warm white, CRI 90 Voltage: 120V LED; 110V to 240V configurations available Installation: Hardwired; installation by a licensed electrician required Mounting note: Not suitable for vaulted ceilings

A tall wall light built around molded glass domes, each one flame-polished by hand, held in a hand-finished solid steel frame. The cloche shapes give the glass a soft, rounded presence on the wall, and at just over 28 inches high the sconce has real vertical reach for hallways, stair landings and generous living rooms.Choose a brass or bronze finish for the frame, paired with clear glass for a crisp look or amber glass for a warmer glow.Details Frame: Hand-finished solid steel Shades: Molded glass domes, flame-polished by hand Finish options: Brass, Bronze Glass options: Clear, Amber Overall size: 9" W x 10" D x 28 1/4" H Backplate: 4 1/2" diameter, 1/2" H Weight: 40 lbs Voltage: 110-120V Location: Indoor use CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

This tall wall sconce pairs a shade carved by hand from a single block of solid alabaster with a brass frame. When the lamp is on, light passes through the stone and reveals its veining and soft shifts in tone. Because natural alabaster varies so widely in pattern and color, no two sconces look quite the same.The slim, vertical profile suits hallways, stair landings and either side of a mirror or bed. The frame comes in lacquered burnished brass, bronze or polished nickel.Details Overall dimensions: 6" W x 4" D x 18.5" H Backplate: 4.5" W x 18" H Weight: 22 lbs. Shade: hand-carved solid alabaster Frame: brass Finishes: lacquered burnished brass, bronze, polished nickel Bulb note: an LED bulb is strongly recommended, since heat from an incandescent bulb can damage the alabaster Dimmable: compatible with a dimmer switch Voltage: 110-120V Mounting: vertical orientation, hardwired Installation: requires a licensed electrician CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

A slender column of natural horsehair falls the length of this tall wall sconce, catching light much like a mane in motion. An iron frame and glass shade give the soft fall of hair a clean, structured counterpoint, so the piece reads as both tactile and architectural on the wall.At 30 inches tall and only 3.75 inches deep, it suits narrow walls beside a bed, along a hallway or flanking an entry. Choose from four metal finishes and three horsehair tones to tune it to warm or cool palettes.Details Dimensions: 30" H x 5.5" W x 3.75" D (78 x 14 x 9 cm) Materials: Iron, horsehair tassel, glass Metal finishes: Aged Brass, Oil-Rubbed Bronze, Blackened Brass, Tarnished Silver Horsehair colors: Palomino, Jet Black, Flaxen Light source: G9 base, LED or Edison-style bulb, 3000K Voltage: AC 110-240V Wiring: Hardwired, operated by a standard wall switch (switch not included) Use: Indoor only, not waterproof Installation: Requires a licensed electrician

The Marlo Linear Sconce pares a wall light down to two parts, a slim geometric body and a thick crystal lens. The lens has beveled edges and sits slightly apart from the metal frame, so it seems to hover in front of it. The result is quiet and precise, with a soft glow that catches light along every edge.At just over 25 inches tall, it has the proportions to frame a mirror, flank a bed or line a hallway. It also suits a foyer or dining room where you want vertical light with some presence.Details Overall dimensions: 6" W x 4 3/4" D x 25 1/4" H Backplate: 5" W x 8" H Weight: 12 lbs Materials: Brass with K9 crystal glass Finishes: Lacquered Burnished Brass, Matte Black or Polished Nickel Light source: 2 E26 base bulbs, 20W maximum each Light color: Warm white, 2700K Dimmable: Yes Voltage: Available in 110V to 220V Bulbs: Included Installation: Hardwired; requires installation by a licensed electrician

This wall light is built around a long, slender metal stem that carries a tapered quartz diffuser with a soft optical haze. Mounted vertically, it reads as a single luminous line, casting a gentle glow across the wall around it. It suits contemporary hallways, entries and feature walls where a tall, narrow fixture can draw the eye.The integrated LED is dimmable and lets you choose between three color temperatures, so the light can be tuned warmer or cooler to match the room. Two finishes and two lengths are offered.Details Finishes: Aged Brass, Antique Nickel Materials: Metal stem with crystal and optical haze quartz diffuser 32-inch size: 5.13" W x 32" H, 3.88" extension; backplate 8.88" W x 1" H; weight 4.2 lbs 70-inch size: 8" W x 70" H, 6.63" extension; backplate 13.88" W x 1" H; weight 21.3 lbs Light source, 32-inch: one 21W integrated LED module, 900 lumens, 90 CRI (included) Light source, 70-inch: one 28W integrated LED module, 1242 lumens, 90 CRI (included) Voltage: 120V to 277V Color temperature: selectable 3000K, 3500K or 4000K Dimming: ELV and Triac compatible Energy code: Title 24 compliant

This wall light pairs a slender metal frame with a panel of natural alabaster, a stone that glows softly when lit and shows its own veining from piece to piece. The look is clean and modern, and the light it casts is warm and even, suited to a kitchen island wall, a dining room or the space beside a bed.It comes in two heights and two finishes, so it can sit quietly in a compact room or hold its own on a taller wall.Details Materials: Metal and alabaster Finish: Brass or black Height: 23.6 in (60 cm) or 31.1 in (79 cm) Light source: LED bulbs, included Color temperature: Warm white, 2700K or 3000K Voltage: 110V to 240V available Suggested settings: Hotels, restaurants, dining rooms, bedrooms and living rooms Installation: Hardwired; installation by a licensed electrician is required

This tall wall sconce pairs a slim brass frame with a shade of either crystal or alabaster, giving two distinct moods from the same silhouette. Alabaster softens the light into a warm, even glow with natural veining, while crystal adds clarity and a little sparkle.At 22 inches tall on a compact rectangular backplate, it suits a bedside wall, a hallway or either side of a mirror. Two dimmable sources let you set the brightness to the hour.Details Dimensions: 7.5" W x 22" H Backplate: 4.5" x 12" rectangle Weight: 16 lbs Materials: Brass with crystal or alabaster shade Finish options: Brass or polished nickel Shade options: Crystal or alabaster Light sources: 2, LED, dimmable Sockets: 2 E26 keyless Bulbs: 2 T6, 40W each Installation: Hardwired; installation by a licensed electrician required

Three slabs of hand-cut calcite rise one above another in a solid brass frame, glowing in sequence up the wall. At nearly 80 cm tall, this sconce brings real vertical presence, so it holds its own on a wall where a single stone would feel like a small accent.Because every slab is cut by hand, the three stones on each fixture vary in veining and tone, and no two sconces are alike. The tall profile sits well in a hallway, along a stair, in a double-height entry or on a high bedroom wall, used on its own or as a mirrored pair.Details Materials: Hand-cut calcite, solid brass frame Finish: Gold Dimensions: 79.4 cm (31.3") H x 15.2 cm (6") W x 14 cm (5.5") D Light: Warm white, 2700K Installation: Hardwired wall mount

This sconce is a single long rod of tapered brass finished with a glowing crystal tip. Light gathers at the crystal and runs along the metal in both directions, so on the wall it reads as one clean vertical stroke. The brass is worked to catch shadow down its length instead of reflecting flatly, and the crystal is cut to scatter light where it meets the rod.At 92 cm tall with a projection of only 7 cm, it adds height to a wall while staying close to it. That makes it a natural fit for hallways, stair walls, entrances and niches. In a living room or bedroom, a pair works well framing a doorway, a mirror or a headboard.Details Materials: Brass and crystal Dimensions: 92 cm H x 11 cm W x 7 cm D (36.2 x 4.3 x 2.8 in) Weight: Approximately 2 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

A torch-style wall light with a ribbed glass hurricane that catches and scatters the glow of a single bulb. The tall, slender profile reads clean and architectural against the wall, and the solid metal body gives it a reassuring weight.Choose from four finishes. The bronze option is a living finish that deepens to a darker patina with age, most quickly where hands touch it, so each fixture develops its own character over time.Details Finishes: Brass (lacquered burnished brass), Bronze, Nickel (polished nickel), Weathered Zinc Materials: Brass, Bronze and Nickel finishes are made of brass; Weathered Zinc is made of aluminum Nickel finish: nickel plated Brass finish: lacquered to hold its color Bronze finish: live solid brass finish protected by a light coat of wax; darkens and patinas naturally over time Shade: ribbed borosilicate glass hurricane For brighter light, an LED bulb with higher lumen output is an option Compatible with dimmer switches Voltage: 110-120V Overall: 4.5" W x 6" D x 72" H Wall plate: 4.5" diameter Weight: 13 lbs Installation: hardwired; requires assembly and installation by a licensed electrician CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

Two faceted crystal spheres sit on a slim solid brass frame, each one ground and polished by hand so it catches the light and scatters it softly across the wall. Choose clear crystal for a bright, sparkling glow, or smoke crystal for a moodier, more subdued effect.The compact round backplate keeps the fixture visually light, while its 28-inch height gives it real presence beside a bed, flanking a vanity mirror, in a hallway or at an entry.Details Materials: Solid brass and crystal glass Finish options: Lacquered burnished brass, matte black, polished nickel Crystal options: Clear, smoke Overall dimensions: 12" W x 6 1/4" D x 28" H Backplate: 4 1/2" diameter, 1/2" deep Weight: 19 lbs Light source: 2 G9 bulbs, 5W max each, dimmable Color temperature: Warm white, 3000K Voltage: 110V to 220V available Installation: Hardwired; installation by a licensed electrician is required

This outdoor lantern takes its cues from glass and steel architecture. Clean, linear lines form a ventilated metal frame, and the glass panels inside appear to hover within it, giving a familiar lantern shape a lighter, more modern presence.At 28 inches tall on a slim full-height backplate, it holds its own beside an entry door or along an exterior wall. Choose lacquered burnished brass for warmth or matte black for a crisper, graphic outline.Details Overall dimensions: 12"W x 10.25"D x 28"H Backplate: 7"W x 0.5"D x 28"H Weight: 35 lbs Materials: Brass and glass Finishes: Lacquered Burnished Brass or Matte Black Light source: 2 E26-base bulbs, 40W max each Dimmable: Yes Mounting: Wall mount; not suitable for vaulted ceilings Installation: Requires a licensed electrician

Woven horsehair wraps a slender brass body in this tall wall sconce, giving the metal a soft, textured contrast. Etched glass completes the composition, and the long vertical profile suits narrow walls, bedside placements and hallways where a quiet, crafted detail is welcome.Choose the body finish and the horsehair shade to suit your palette, from pale flaxen to deep jet black.Details Dimensions: 32.25" H x 5" W x 3.75" D (82 cm H x 13 cm W x 10 cm D) Backplate: 5" diameter Materials: Woven horsehair wefts, brass, etched glass Body finishes: Aged Brass, Oil-Rubbed Bronze, Blackened Brass, Tarnished Silver Horsehair colors: Flaxen, Jet Black, Palomino Light source: 1 x 3W dimmable LED bulb Color temperature: Warm white 3000K or daylight 4000K Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended

A slim, tapered rod of brushed stainless steel rises from the wall and ends in a lit crystal tip. The glow begins at the crystal and runs down the length of the metal, so the sconce reads on the wall as one clean vertical line.The brushed finish catches soft shadow along the rod instead of throwing back a flat shine, and the cut crystal scatters light where it meets the steel. At 50 cm it is slender but has real presence. It works well in a hallway, at an entry, along a staircase or in a niche. Mounted as a pair on either side of a doorway, it makes the most of that vertical form.Details Materials: Brushed stainless steel with a cut crystal tip Dimensions: 50 cm H x 11 cm W x 11 cm D (19.7 x 4.3 x 4.3 in) Weight: Approximately 1.8 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

This conical wall sconce is built from clear K9 crystals arranged around a stainless steel frame, shaped into a tapered cone that throws light both up toward the ceiling and down toward the floor. The crystal catches and scatters the glow, giving a wall a soft, sparkling wash of light.At 16 inches tall, it suits a bedroom wall beside the bed, a living or dining room, a foyer, or a hotel corridor where a pair of fixtures can set a steady rhythm along the wall. Choose gold for warmth or chrome for a cooler, brighter look.Details Dimensions: 12" W x 16" H Materials: Stainless steel and K9 crystal Finish options: Gold, Chrome Light source: 1 G9 LED bulb, included Voltage: 110V to 240V available Installation: Hardwired, professional installation recommended Suggested rooms: Living room, dining room, bedroom, hallway, entryway

This two-light sconce pairs a slender, tapered torch form with shades of textured linen, drawing on mid-century lines without feeling dated. Wrapped detailing and small decorative flourishes at the joints give the steel frame a finished, considered look up close.Choose a bronze plated finish for a warmer, deeper tone or burnished brass for a softer glow. Its compact depth suits hallways, bathrooms, studies and lounges where a pair of shaded lights adds gentle, even illumination.Details Materials: Steel frame with tapered linen shades Finish options: Bronze plated or burnished brass Dimensions: 13" W x 6" D x 17.3" H; shades 6" diameter Backplate: 5.25" diameter x 0.75" deep Weight: 2.09 lbs Light source: Two E12 bulbs, 60 watts max each (bulbs not included) Wiring: 6" black and white PVC and copper cord Installation: Hardwired; professional installation recommended Mounting hardware included CareWipe gently with a soft, dry cloth. Avoid polishes and cleaners, which can damage the finish.

This wall sconce pairs thick, clear crystal with an iron frame, so light passes through the glass and scatters softly across the wall. The crystal brings sparkle while the metal keeps the outline clean and composed.It works well flanking a mirror, along a hallway or beside a bed. The iron comes in a bronze or brass finish to suit warmer or deeper palettes.Details Materials: Thick clear crystal and iron Finish options: Bronze or brass Dimensions: 6.25" W x 4.75" D x 10.5" H Diameter: 4.75" Backplate: 4.75" W x 10.25" H x 0.75" D Weight: 5.7 lbs Light source: One E12 socket, 60 watts max (bulb not included) Cord: Clear PVC with copper wire, 11.75" long Installation: Hardwired, professional installation recommended; mounting hardware included CareWipe gently with a soft, dry cloth. Avoid polishes and cleaners, which can damage the finish.

A thick dome of solid crystal sits at the heart of this wall sconce, its form drawn from the glass vessels once used by nineteenth-century botanists. The shade is cast from a single block, then turned on a lathe, ground with wet stone and polished by hand until the glass reads clear and luminous. At a full one and a half inches thick, it has real weight and presence, catching and softening the light from within.The frame and round backplate are solid brass, offered in three finishes so the sconce can sit comfortably beside warm or cool metals elsewhere in a room.Details Overall: 7" W x 8 3/4" D x 12" H Glass shade: 7" diameter, 5" H, 1 1/2" thick crystal Backplate: 5" diameter, 1" D Weight: 13 lbs Materials: Hand-finished cast crystal shade; solid brass frame and backplate Finishes: Lacquered Burnished Brass, Bronze, Satin Nickel Light source: One E12 candelabra bulb, LED 6.5W max or incandescent 40W max Bulb: Included Dimmable: Compatible with a dimmer switch Voltage: 110-120V Use: Indoor, dry locations