Alabaster Lighting

This ceiling light is little more than a clean circle: a slender rim of polished brass framing a frosted acrylic face. At just 4 cm (1.6") deep, it hugs the ceiling closely, which makes it a natural choice for rooms where every inch of headroom counts, including the lower ceilings common in older homes and apartments.The integrated LED hides behind the diffuser, so when switched on the whole face fills with a soft, even glow and no visible hot spots. Set at a warm 2700K, it reads as a gentle creamy white rather than a cold panel, comfortable for bedrooms in the evening and quiet enough to sit well in modern or traditional interiors. It is meant as general room light, so pair it with focused task lighting over a desk or kitchen counter.Details Frame: Polished brass Diffuser: Frosted acrylic Diameters: 30 cm (11.8"), 40 cm (15.7"), 50 cm (19.7") Depth: 4 cm (1.6") Light source: Integrated LED, warm white 2700K Weight: about 1.5 kg (3.3 lb) for the 30 cm; about 2.5 kg (5.5 lb) for the 50 cm Mounting: Flush to the ceiling, nothing extends below the 4 cm profile Installation: Hardwired; installation by a licensed electrician is recommended Suggested ceiling height: from about 2.3 m (7.5 ft) Choosing a size 30 cm: hallways, landings, closets and compact bedrooms. For a long corridor, space two or three evenly along its length. 40 cm: a bedroom or study of roughly 3 × 3.5 m (10 × 11.5 ft) 50 cm: a larger bedroom or living room of roughly 4 × 4.5 m (13 × 15 ft) CareTurn the power off before cleaning. A soft, dry cloth is all the frame and diffuser need. Keep metal polishes and abrasive products away from the brass.

Carved natural alabaster meets solid brass in this up-down wall sconce, which sends light out through the top and bottom of the stone to wash the wall in both directions. Because the alabaster itself diffuses the glow, with no glass lens in between, the light comes through soft and warm.Each piece of stone has its own veining, color and translucency, so no two sconces look exactly alike. Choose a single head for a bedside, a hallway or a powder room, or two heads for a taller column of light beside a stair, in an entry or along a dining wall.Details Materials: hand-carved natural alabaster and solid brass Configurations: 1 head or 2 heads Height: 28 cm (11 in) Width: 10 cm (3.9 in) Depth: 14.5 cm (5.7 in) for 1 head; 12.5 cm (4.9 in) for 2 heads Weight: approx. 1.8 to 2.6 kg (4 to 6 lb) for 1 head; 2.4 to 3.4 kg (5 to 7 lb) for 2 heads Light direction: up and down Bulb type: E14 sockets (E12 for North America), warm white 2700K Installation: hardwired

A thin disc of carved alabaster sits on a slender brass mount, cut fine enough that light passes through the entire face. When lit, the stone's natural veining becomes the pattern you see, so the sconce reads as much as a lit object as a light source.At 60 cm tall, it has the presence to hold a wall by itself in a living room, entry, stair landing or bedroom. Because alabaster is a natural stone, each disc carries its own color, veining and translucency, and no two will match.Details Materials: Carved natural alabaster disc, brass mount Dimensions: 60 cm (23.6") high x 30 cm (11.8") wide Light: Warm white, 2700K Installation: Hardwired wall mount; secure into a stud or use reinforced anchors Variation: Color, veining and translucency vary from disc to disc

Two hand-carved wings of natural alabaster flank a brushed brass center plate in this oval wall sconce. The lamps sit behind the stone, so light spills around the wings, warming their edges and casting a soft halo onto the wall behind.Because each wing is cut from natural stone, the veining varies between the two wings and from one fixture to the next. The rounded, ovate profile reads as a sculptural wall object even when the light is off, which suits living rooms, bedrooms, hallways and powder rooms where it will be seen up close.Details Materials: natural carved alabaster wings, brushed brass center plate Dimensions: 25 cm (9.8") wide, 40 cm (15.7") high, 10 cm (3.9") deep Light source: G9 lamps, warm white 2700K Mounting: hardwired wall mount

Bands of curved iron overlap and layer around acrylic diffusers, forming a broad, low ceiling light that reads as sculpture even when switched off. Once lit, a soft glow escapes between the ribbons and casts gentle shadows across the ceiling, and the play of light on each band shifts as you walk beneath it.The gold finish draws out the movement of every curve, while the grey has a calmer, more architectural character. Both are designed around warm 2700K light, which gives the gold a rich glow and lends the grey a soft pewter tone. Because the profile stays low, the fixture keeps sightlines open over a dining table, kitchen island, entrance hall or reception area. It gives ambient light rather than a focused downlight, so pair it with task lighting over a working island.Details Materials: Iron ribbons with acrylic diffusers Finishes: Gold or grey Diameter: 60 cm (23.6") or 80 cm (31.5") Suspension: 50 cm (19.7") chain as standard, can be made longer or shorter to suit your ceiling height Light: Warm white, 2700K Installation: Hardwired, to be installed by a qualified electrician Sizing 60 cm: Suits a round or square table of roughly 90 to 120 cm (35 to 47"), a short island, or a room around 3 x 3.5 m (10 x 11.5 ft) 80 cm: Suits a table of roughly 120 to 160 cm (47 to 63") or a room around 4 x 4.5 m (13 x 15 ft) Over a table: Hang the bottom of the fixture 75 to 90 cm (30 to 35") above the surface CareTurn the light off and allow it to cool first. Dust the iron with a dry microfiber cloth, and wipe the acrylic diffusers with a lightly damp cloth. Avoid solvent-based cleaners.

A tall cylinder of translucent alabaster sits on a weighted base in a bronze finish, rising from a gently flared neck. Because the shade is natural stone, each one carries its own veining, and that pattern comes forward once the lamp is switched on, casting a warm glow rather than a cool white light.The slim, upright proportions make it a good fit for a nightstand, a console or a desk in a study, anywhere the surface is narrow but there is room overhead.Details Shade: Cylindrical, translucent natural alabaster Base: Weighted, bronze finish, flared neck Dimensions: 20 cm (7.9") wide, 48 cm (18.9") high Light: Warm white, 2700K Note: Veining varies from piece to piece as a natural feature of the stone

A tall panel of natural alabaster set into a slender brass frame, this sconce sits just 7 cm from the wall and keeps its light source fully concealed. When it is on, the stone itself glows, giving a soft, even wash from top to bottom without a bright spot.Because alabaster is a natural material, each panel has its own veining and translucency, so no two pieces look quite alike. The shallow profile works well in a hallway, beside a bed in place of a table lamp, or flanking a vanity mirror. Mounted in a series along a corridor, the sconces read more like part of the wall than individual fixtures.Details Materials: Natural alabaster panel, metal body Finishes: Brushed brass or matte black Dimensions: 50 cm (19.7") high, 12 cm (4.7") wide, 7 cm (2.8") projection Weight: Approximately 2.8 kg (6 lb) Light source: Integrated LED, approximately 8W and 650 lumens Color temperature: Warm white, 2700K Installation: Hardwired

This wall light is a broad, irregular panel of alabaster with a soft, cloud-shaped outline, supported on brass brackets. When lit from behind, the stone glows evenly and casts a gentle halo that follows its entire edge, so it reads more as luminous stone than as a conventional fixture.The panel is cut from a single large piece of alabaster, which lets the natural veining travel uninterrupted across the surface. No two are alike, and the generous size makes the pattern visible even from the far side of a room. It suits a wall where it can stand alone, such as a stair landing, a double-height living area, a spa or a hotel lobby.Details Material: single-piece natural alabaster panel on brass brackets Dimensions: approximately 90 cm (35.4") wide by 94 cm (37") high Weight: approximately 12 to 18 kg (26 to 40 lb) Light source: concealed integrated LED panel Color temperature: warm white, 2700K Dimming: available as an option Orientation: mounting is configured for the chosen hanging direction Installation: requires a reinforced wall fixing and installation by a professional Veining: unique to each stone, varies from piece to piece

A sphere of natural alabaster rests within a hand-forged iron ring, so the stone appears cradled by the metal rather than fixed to the wall. When lit, the alabaster glows softly and the ring casts its own outline across the surrounding surface, adding a quiet layer of shadow and depth.Because the globe is turned from real stone and the ring is shaped and textured by hand, each sconce carries its own veining and surface character. It sits comfortably beside a bed, along a hallway or stair, or in a powder room where the play of light on the wall can be appreciated up close.Details Materials: natural alabaster globe, hand-forged and hand-textured iron ring Dimensions: 23 cm (9.1") wide, 28 cm (11") high, 17 cm (6.7") deep Light: warm white, 2700K Installation: hardwired wall mount Natural variation: stone and ironwork differ slightly from piece to piece

A shade of carved alabaster hangs from a brass arm, with a column of stacked spheres stepping down from the wall plate to give the sconce its quiet architectural rhythm. Because the shade is natural stone, each one carries its own veining and translucency, and the light that passes through it reads warm and soft rather than bright white.It sits comfortably beside a bed, along a hallway, in an entry or flanking a vanity mirror. The sphere detail holds its own as a single fixture, though the design looks its best mounted in pairs.Details Materials: carved natural alabaster shade, brass arm and wall plate Height: 38.6 cm (15.2 in) Width: 15 cm (5.9 in) Depth: 16 to 18 cm (6.3 to 7.1 in) Light: warm white, 2700K Installation: hardwired wall mount Note: veining and translucency vary with each piece of stone

A carved alabaster bell hangs from a slender brass arm, and three stacked brass spheres step down from the wall plate to meet it. Those beads give the arm a sculptural, almost totemic rhythm, so the sconce holds its own even when switched off.The shade is natural stone, which means every piece has its own veining and degree of translucency. When lit, the alabaster gives off a soft, warm glow instead of a crisp white light. Mount one beside a bed or along a hallway, or set a pair on either side of a vanity mirror, where they read more like two carved objects than standard fixtures.Details Materials: Genuine alabaster shade with brass arm and spheres Dimensions: 38.6 cm (15.2 in) H × 15 cm (5.9 in) W × 16 to 18 cm (6.3 to 7.1 in) D Weight: 2.5 to 3.5 kg Bulb type: E12 base in North America, E14 base in other markets Color temperature: Warm white, 2700K Dimming: A dimmable version is available Installation: Hardwired to a wall junction box; installation by a qualified electrician is recommended Mounting: Choose anchors and fixings suited to both the fixture's weight and your wall type Bedside placement: Center the fixture roughly 140 to 152 cm (55 to 60 in) above the floor Vanity placement: Install one on each side of the mirror at about face height Use: Intended for dry interior spaces only; not for outdoor use

This oval chandelier gathers upright panels of Spanish alabaster into a racetrack shape, rounded at each end and straight along the sides. The panels descend in four staggered tiers from one solid brass canopy, and the whole fixture is sized to run the length of a long dining table or kitchen island.Each panel is a soft, translucent stone with its own natural clouding and veins, and the panels are deliberately left unmatched. You may choose more veining, less veining or a random mix. With the lamps housed inside the oval, light filters out through the stone, casting a gentle, even glow along the table instead of a sharp downward beam. Solid brass studs secure the panels along the upper edge and remain on view as a design detail, while slim braided stainless-steel cables nearly vanish overhead so the stone appears to hover.The alabaster reflects the color of the light within it. Warm white at 2700K brings out honey and cream tones with amber and gray drifts in the veining. Cooler light reads gray-white and flattens that depth, so warm lamps are strongly recommended.Details Sizes: 14-head model and 16-head model. Lengths of 100 cm (39.4″) and 120 cm (47.2″), both 35 cm (13.8″) wide and 35 cm (13.8″) high Materials: Spanish alabaster panels; solid brass canopy, hardware and studs; braided stainless-steel cables Veining: more, less or random, selected at order Light source: G9 lamps; the 120 cm takes sixteen. Warm white LED at 2700K recommended. Bulbs not included Weight: about 23 kg (51 lb) for the 100 cm; about 32 kg (71 lb) for the 120 cm Suspension: adjustable cables up to 100 cm (39.4″); at full length the fixture drops about 135 cm (53″), suiting ceilings of roughly 2.9 to 3 m (9.5 to 10 ft) over a table. Longer cables can be supplied, and cable length is set to your ceiling height Installation: hardwired. Requires an electrician, with the fixture secured to a joist or reinforced blocking instead of a standard ceiling box Sizing guide: 100 cm for tables of about 160 to 200 cm (63 to 79″); 120 cm for tables or islands of about 180 to 220 cm (71 to 87″) Hanging height: lowest point 75 to 90 cm (30 to 35″) above the surface Kitchen use: pair with dedicated task lighting over an island CareTurn the fixture off and allow the lamps to cool before cleaning. Alabaster is soft and porous, so dust it only with a dry soft cloth or feather duster, never with water, spray or any cleaning product. The brass also needs nothing more than a dry soft cloth; avoid metal polish.

A solid cylinder of burgundy alabaster forms the base of this table lamp, finished with stainless steel accents and topped by a tapered linen shade in a warm beige. The stone is chosen by hand, so the veining and the richness of the red shift from one lamp to the next, and no two are quite alike.Alabaster holds color in a way marble does not. Light travels a little way into the stone instead of bouncing off its face, which gives the base a quiet depth. Paired with warm white light at 2700K, the burgundy stays rich rather than turning gray, while the linen shade diffuses the glow for a bedside table, a console or a living room surface.Details Base: Natural burgundy alabaster, cylindrical, with stainless steel detailing Shade: Tapered linen in warm beige Dimensions: 30 cm (11.8") wide, 39 cm (15.4") high Recommended light: Warm white, 2700K Note: Veining and color depth vary naturally with each stone

A carved dome of solid alabaster sits within a band of blackened steel, its edge cut in a gear-tooth pattern that frames the pale stone with a crisp, graphic outline. The whole rests on a cast steel base, giving the lamp a grounded, weighty presence.Because alabaster is a natural stone, each dome carries its own veining and its own degree of translucency, so the glow will be particular to your piece. It sits well on a console, a nightstand or a living room table, especially in a Japandi or minimalist interior that calls for something substantial rather than slender.Details Shade: Hand-carved solid alabaster dome Trim: Blackened steel with gear-tooth motif Base: Cast steel Dimensions: 31 cm (12.2") diameter, 43 cm (16.9") high Light: Warm white, 2700K Note: Veining and translucency vary with each stone

A solid cylinder of alabaster sits within a brass housing, forming a slim sconce with real visual weight. The stone is thick enough to keep its color when illuminated, so the light it gives is soft and warm, held close to the surface rather than thrown across the room.Because alabaster is a natural stone, the veining is unique to each cylinder. The narrow profile works well flanking a vanity mirror, set in pairs along a corridor, beside a bed or on an accent wall. In a bathroom, place it in a dry or protected spot away from direct water.Details Materials: Natural alabaster cylinder with brass housing Dimensions: 13 cm (5.1 in) diameter, 43 cm (16.9 in) high Light: Warm white, 2700K Installation: Hardwired wall mount Bathroom use: Dry or protected positions away from direct water

A shallow dome of honed alabaster sits close to the ceiling on a slender brushed brass base, so the stone carries the whole look of the fixture. Each dome is carved from a single block, and once the lamp is on, the natural veining glows through the surface. No two are alike.The stone takes on the color of the light behind it. With a warm white 2700K lamp it reads as honey and cream with the veins drawn forward, while cooler light leaves it looking gray and flat, so warm white is recommended. The result is a soft, even ambient glow suited to hallways, entries, landings, powder rooms and smaller bedrooms or bathrooms. In a kitchen or at a desk, pair it with task lighting.Details Materials: solid alabaster dome, honed finish; solid brass base, brushed finish Small: 20 cm (7.9 in) wide, 10 cm (3.9 in) high, about 2.2 kg (4.9 lb). Suits hallways, closets, powder rooms, entryways or a row along a corridor Large: 24 cm (9.4 in) wide, 12 cm (4.7 in) high, about 3.4 kg (7.5 lb). Suits a small bedroom, a landing or a bathroom up to roughly 3 x 3 m (10 x 10 ft) Ceiling height: works on ceilings from about 2.3 m (7.5 ft) Lamp: one E26 or E27 base; warm white 2700K LED recommended; bulb not included Mounting: flush to the ceiling, with the dome held just below the base Installation: hardwired; installation by an electrician is required CareTurn the fixture off and allow the lamp to cool first. Dust the alabaster with a soft, dry cloth only, and never use water or cleaning products on the stone. Wipe the brass with a soft, dry cloth and skip any polish.

A single square of natural green marble, backlit by an acrylic diffuser, makes up this wall light. Switched off, the stone reads deep and solid. Switched on, light comes through the veining and the green takes on a glowing, translucent quality.Because each block is cut from natural stone, no two are alike in veining or depth of color. At 60 cm square it holds its own as a focal point on a living room or bedroom wall, in an entrance, or in a hospitality interior where it can be seen from across the room.Details Material: Natural green marble with acrylic diffuser Dimensions: 60 × 60 cm (23.6 × 23.6 in) Light source: Integrated LED, no bulb to replace Color temperature: Warm white, 2700K Versions: Standard or waterproof for bathroom use Installation: Hardwired wall mount. Secure into structure, not plasterboard alone.

Fourteen alabaster spheres gather along a single solid brass rod, placed with intentional irregularity so the fixture never feels rigid. Seen from beneath, the spheres seem to tumble downward. Seen from a distance, the whole piece settles into a slender vertical line.A lamp sits inside every sphere, letting the stone light up from its core with a soft, even warmth. Because alabaster is a natural material, each sphere carries its own veining, color and degree of translucency. The fixture suits tall rooms: a stairwell spanning two floors, a double-height foyer or living area, or a long dining table beneath a ceiling of 3.7 m (12 ft) or higher. When hanging it in a stairwell, aim for the bottom sphere to land near the middle of the stairs.Details Materials: Spanish alabaster spheres on a solid brass rod Height: 160 cm (63") Width: 50 cm (19.7") Light source: 14 G9 bulbs, warm white 2700K Weight: approximately 14 to 20 kg (31 to 44 lb) Recommended ceiling height: 3.7 m (12 ft) or more Installation: an electrician should verify that the ceiling structure can support the fixture's weight

Three slabs of hand-cut calcite rise one above another in a solid brass frame, glowing in sequence up the wall. At nearly 80 cm tall, this sconce brings real vertical presence, so it holds its own on a wall where a single stone would feel like a small accent.Because every slab is cut by hand, the three stones on each fixture vary in veining and tone, and no two sconces are alike. The tall profile sits well in a hallway, along a stair, in a double-height entry or on a high bedroom wall, used on its own or as a mirrored pair.Details Materials: Hand-cut calcite, solid brass frame Finish: Gold Dimensions: 79.4 cm (31.3") H x 15.2 cm (6") W x 14 cm (5.5") D Light: Warm white, 2700K Installation: Hardwired wall mount

Ribbed panels of natural alabaster are stacked within an iron frame, forming a compact sconce with real depth. Unlit, the fins read as carved stone. Lit, warm light slips through the gaps between them and casts a striped vertical glow across the wall.Because every fin is cut from natural stone, the veining and translucency shift along the stack and differ from one sconce to the next. The shallow footprint works well in a hallway, beside a bed, or as a pair flanking a vanity mirror, where the ribbed surface offers more texture than a flat shade.Details Materials: Natural alabaster panels, iron frame Dimensions: 25 cm (9.8") wide, 22 cm (8.7") high, 18 cm (7.1") deep Weight: Approximately 3 to 4.5 kg (7 to 10 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount

A carved alabaster egg sits against a broad brass backplate in this wall sconce. When lit, the metal throws light back across the wall behind the stone, giving the glow a layered, dimensional quality instead of a flat wash.Because the alabaster is natural stone, each egg carries its own veining, color and degree of translucency. The sconce is generously scaled and reads well on its own, on a bedroom wall, in an entry, in a dining room or next to a bathroom mirror. For comfortable placement, set the center roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: natural carved alabaster, brass backplate Height and width: 37 cm (14.6") Projection from wall: 15 to 17 cm (6 to 6.7") Weight: approximately 3 to 4.2 kg (7 to 9 lb) Light source: integrated LED, 2700K warm white Output: approximately 300 to 450 lumens Voltage: 110 to 240V Installation: hardwired, wall mounted Note: stone veining and color vary from one piece to the next

This tiered chandelier gathers carved alabaster teardrops into concentric rings suspended from a solid brass frame. The longest drops circle the outer edge, and each ring below steps inward and shortens, finishing with the smallest drops at the center. Unlit, it has the presence of sculpted stone. Lit, each drop glows through its own thickness and the layers resemble water caught mid-fall.Because the lamps sit among the teardrops, light filters through several layers of stone before reaching the room. The result is soft and diffused, closer to candlelight than to a focused downlight, so plan separate task lighting over a kitchen island or desk. Warm white matters here: at 2700K the alabaster turns honey and cream with amber and gray veining, while cooler light flattens it to a dull gray-white.Details Sizes: Ø55cm x H43cm (21.7" x 16.9"), 4 tiers, 6 lights; Ø80cm x H55cm (31.5" x 21.7"), 6 tiers, 14 lights; Ø100cm x H62cm (39.4" x 24.4"), 7 tiers, 20 lights Shade material: Spanish alabaster teardrops, selected for softer veining; softer, stronger or random veining may be specified Frame: Solid brass frame, chain and hardware; chrome or black stainless steel available as alternatives Overall drop with standard chain: about 73 cm (29") for the 55 cm, 85 cm (33") for the 80 cm, 92 cm (36") for the 100 cm, suiting dining ceilings of roughly 2.3 to 2.6 m (7.5 to 8.5 ft) Bulbs: 6, 14 or 20 E12 or E14 candelabra lamps depending on size; 2700K warm white LED recommended; bulbs not included Weight: about 10 kg (22 lb), 20 kg (44 lb) and 35 kg (77 lb) respectively Installation: Hardwired; the two larger sizes should be secured by an electrician to a joist or reinforced blocking instead of a standard ceiling box Table sizing: 55 cm for round tables about 90 to 120 cm (35 to 47"), bedrooms, dressing rooms or powder rooms; 80 cm for tables about 130 to 170 cm (51 to 67") or an entry; 100 cm for tables about 170 to 220 cm (67 to 87") seating ten or more, or a large entry Hanging height: Keep the lowest point 75 to 90 cm (30 to 35") above the tabletop CareTurn the fixture off and allow the bulbs to cool before cleaning. Alabaster is soft and absorbent, so clean it only with a dry soft cloth or feather duster and never apply liquids or cleaning products. The brass needs nothing more than a gentle dry wipe; avoid polishes.

Two rings of hand-cut Spanish alabaster float one above the other, the larger on top and the smaller set roughly 40 cm (15.7") below. Each ring carries an LED inside it, so the stone itself becomes the light. As with any natural stone, the two rings will differ slightly.The light is integrated warm white at 2700K, which brings out honey and cream tones in the alabaster and lets the veining read as soft amber and gray. The glow spreads outward and downward with no visible lamps, giving even ambient light over a dining table, kitchen island, bedroom, living room or entry. For close work at an island or desk, pair it with task lighting.Details Small: rings of 80 cm (31.5") and 50 cm (19.7"), about 2,200 lumens, about 12 kg (26 lb) Large: rings of 100 cm (39.4") and 60 cm (23.6"), about 3,000 lumens, about 18 kg (40 lb) Ring height: 7 cm (2.8") each Material: solid Spanish alabaster, cut by hand Finishes: Gold, with a solid brass canopy, or Black, with a black-finished stainless steel canopy Suspension: fine stainless steel cables from a single canopy Light source: integrated LED, 2700K warm white, replaceable LED strips Installation: hardwired. Have an electrician secure it to a joist or reinforced blocking, not a standard ceiling box. Sizing guide: Small suits a table of about 150 to 200 cm (59 to 79") or a room near 4 × 5 m (13 × 16 ft). Large suits a table of about 220 to 300 cm (87 to 118") seating ten to twelve, or a double-height living room or entry. Hanging height: over a table, set the lower ring 75 to 90 cm (30 to 35") above the surface. At the full drop, this fits ceilings of about 3.1 to 3.3 m (10 to 11 ft). CareTurn the fixture off and let it cool before cleaning. Alabaster is soft and porous, so dust it only with a soft dry cloth or feather duster, and keep water, sprays and cleaners away from it. Wipe the metal with a dry cloth and do not use polish.

Two hand-carved alabaster domes sit at either end of a U-shaped arm of solid brass, one facing up the wall and one facing down. The result is an even, softly balanced light that washes the surface in both directions instead of throwing a beam one way.Because each dome is cut from natural stone, the veining is unique to every piece, and the two domes on a single fixture will differ from one another. The arm can be ordered extending to the left or the right, which lets you mirror a pair on either side of a bed, a doorway or a mirror.Details Materials: Solid brass arm with natural carved alabaster domes Dimensions: 31 cm (12.2") wide by 37.8 cm (14.9") high Orientation: Left or right arm Light source: Two E14 lamps (E12 for North America), warm white 2700K recommended Installation: Hardwired; suitable for straight or sloped walls Suggested mounting: Center about 150 to 160 cm (59 to 63") from the floor when placed beside a bed Alternate finish: Also available in black stainless steel