En stock - Listo para entregar

Carved natural alabaster meets solid brass in this up-down wall sconce, which sends light out through the top and bottom of the stone to wash the wall in both directions. Because the alabaster itself diffuses the glow, with no glass lens in between, the light comes through soft and warm.Each piece of stone has its own veining, color and translucency, so no two sconces look exactly alike. Choose a single head for a bedside, a hallway or a powder room, or two heads for a taller column of light beside a stair, in an entry or along a dining wall.Details Materials: hand-carved natural alabaster and solid brass Configurations: 1 head or 2 heads Height: 28 cm (11 in) Width: 10 cm (3.9 in) Depth: 14.5 cm (5.7 in) for 1 head; 12.5 cm (4.9 in) for 2 heads Weight: approx. 1.8 to 2.6 kg (4 to 6 lb) for 1 head; 2.4 to 3.4 kg (5 to 7 lb) for 2 heads Light direction: up and down Bulb type: E14 sockets (E12 for North America), warm white 2700K Installation: hardwired

This wall sconce lets natural alabaster do the talking. Its enclosed shade is carved from a single slab of stone, so the veining and soft tonal shifts run uninterrupted from top to bottom. When lit, the alabaster softens the light into a warm, even glow that suits a bedside wall or a quiet hallway.Iron accents in a brass finish frame the stone and give it a crisp, tailored edge. Because alabaster is a natural material, the color and pattern of each sconce will differ, and no two will look exactly alike.Details Materials: natural alabaster with iron metal accents Finish: brass Sizes: 12" and 18" heights 12" size: 5" W x 4" D x 12" H, 4" diameter, 7.7 lbs 18" size: 5" W x 4" D x 18" H, 4" diameter, 9.5 lbs Backplate: 4" W x 11" H on the 12" size, 4" W x 17" H on the 18" size Light source, 12" size: one 4-watt LED E26 bulb, not included Light source, 18" size: two 4-watt LED E26 bulbs, not included Cord: clear plastic, 5" long Installation: hardwired, professional installation recommended Mounting hardware included Color and veining vary from piece to piece

A carved dome of natural alabaster sits within a stainless steel mount, sending a soft wash of light down the wall while the stone itself glows along its edge. The warm 2700K light brings out the veining and depth of the alabaster.Because the stone is natural, each dome has its own pattern of veins and its own degree of translucency. At 35 cm across, this sconce reads best as a single fixture on a wall. It suits a living room, a bedroom, a stair landing or an entry, and it does not need a matching partner beside it.Details Dimensions: 38.5 cm (15.2 in) H × 35 cm (13.8 in) W × 18 cm (7.1 in) D Projection from wall: 18 cm (7.1 in) Materials: Genuine alabaster with stainless steel; veining and translucency vary by piece Light source: G4 bulb, 2700K warm white Dimming: Not dimmable Weight: Approximately 3 to 4.5 kg Installation: Hardwired to a wall junction box; installation by a licensed electrician is recommended Placement: Mount with the center roughly 152 to 168 cm (60 to 66 in) above the floor, leaving open wall below for the downlight Use: Indoor use only

A carved alabaster egg sits against a broad brass backplate in this wall sconce. When lit, the metal throws light back across the wall behind the stone, giving the glow a layered, dimensional quality instead of a flat wash.Because the alabaster is natural stone, each egg carries its own veining, color and degree of translucency. The sconce is generously scaled and reads well on its own, on a bedroom wall, in an entry, in a dining room or next to a bathroom mirror. For comfortable placement, set the center roughly 150 to 160 cm (59 to 63") above the floor.Details Materials: natural carved alabaster, brass backplate Height and width: 37 cm (14.6") Projection from wall: 15 to 17 cm (6 to 6.7") Weight: approximately 3 to 4.2 kg (7 to 9 lb) Light source: integrated LED, 2700K warm white Output: approximately 300 to 450 lumens Voltage: 110 to 240V Installation: hardwired, wall mounted Note: stone veining and color vary from one piece to the next

A single block of natural alabaster is shaped into an open fan, wide and low, so it reads as a horizontal band of light on the wall. The stone is carved thin toward the outer edge, where it glows softly, and left heavier at the base, so the brightest light collects at the point where the fan spreads open.Because alabaster is quarried, every sconce carries its own veining, color and degree of translucency, and the broad fan profile shows off a generous stretch of that pattern. Mount one above a console or a run of them down a hallway, or hang a pair to frame a bed or mirror.Details Material: Natural alabaster, carved from one piece Dimensions: 35 cm (13.8") wide x 22 cm (8.7") high Weight: Approximately 3 to 4 kg (7 to 9 lb) Lamping: E14 sockets (E12 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Installation: Hardwired wall mount Note: Veining, color and translucency vary from piece to piece

A shade of carved alabaster hangs from a brass arm, with a column of stacked spheres stepping down from the wall plate to give the sconce its quiet architectural rhythm. Because the shade is natural stone, each one carries its own veining and translucency, and the light that passes through it reads warm and soft rather than bright white.It sits comfortably beside a bed, along a hallway, in an entry or flanking a vanity mirror. The sphere detail holds its own as a single fixture, though the design looks its best mounted in pairs.Details Materials: carved natural alabaster shade, brass arm and wall plate Height: 38.6 cm (15.2 in) Width: 15 cm (5.9 in) Depth: 16 to 18 cm (6.3 to 7.1 in) Light: warm white, 2700K Installation: hardwired wall mount Note: veining and translucency vary with each piece of stone

A carved alabaster shade sits on a brass mount, and the stone itself does the work of diffusing the light. What comes through is warm and soft, with no harsh edge where shade meets wall.Because alabaster is a natural stone, each shade carries its own veining and translucency, and the pattern shows most clearly once the lamp is on. Hung as a pair, the two stones will read slightly differently, which is much of the appeal. It sits comfortably beside a vanity mirror, along a hallway, or flanking a bed or sofa.Details Materials: Carved natural alabaster shade, brass mount Dimensions: 38 cm (15") high, 21 cm (8.3") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount Note: Veining and translucency vary from piece to piece

A carved alabaster tulip rises from a compact brass backplate, its open cup directing light upward so the wall above takes on a soft, warm wash. Because each shade is cut from natural stone, the veining and the way light pools near the rim vary from one sconce to the next.The slim profile sits comfortably in a hallway, powder room or beside the bed. It also works well in a series, with several spaced along a wall to create a steady rhythm of light.Details Shade: Carved natural alabaster, tulip form Backplate: Brass Width: 13 cm (5.1") Height: 31 cm (12.2") Backplate size: 10 cm (3.9") Light direction: Uplight Color temperature: Warm white, 2700K Installation: Hardwired wall mount

A carved body of natural marble supports a frosted glass globe in this compact wall sconce. The frosting diffuses the lamp fully, so the light stays gentle even when you are standing close, and the stone remains the feature that draws the eye.Because every body is cut from real stone, the veining, tone and mineral markings vary from one sconce to the next. White marble is light and quiet, beige brings a warm, sandy cast, and grey leans darker toward charcoal. The small footprint works well beside a bed, in an entry or along a hallway, and mounting one on each side of a vanity mirror casts balanced light across the face.Details Materials: natural marble body, frosted glass globe Stone options: White Marble, Beige Marble, Grey Marble Light color: warm white, 2700K Installation: hardwired, wall mounted Vanity use: suited to a dry, sheltered spot beside the mirror, kept clear of direct water Dimming: available as an option

Carved from natural travertine, this LED wall sconce carries the quiet, pitted texture and soft taupe coloring that make the stone so appealing. Because travertine forms over long periods in nature, the veining and surface character shift from piece to piece, so your sconce will have its own markings.The design draws on a Japandi sensibility, pairing restrained Japanese form with practical Scandinavian ease. When lit, the LED source washes the stone in a gentle glow that brings out its warm undertones, a calm choice for a living room, bedroom, hallway, entry or bath.Details Material: Natural travertine stone Color: Taupe, with natural variation in pattern and tone Size options: 35 cm or 60 cm Color temperature options: 3000K or 4000K Voltage: 90-260V AC Installation: Wall mounted

Strands of crystal beads hang at staggered lengths from a circular metal frame, catching the light and scattering it softly across the wall. The varied drops give the sconce a loose, cascading outline that feels lighter than its size suggests.Two candelabra sockets sit within the beaded strands, so the glow seems to come from inside the crystal itself. It suits a hallway, a powder room or either side of a bed where you want sparkle without harsh brightness.Details Dimensions: 8" W x 6" D x 22" H Weight: 6.4 lbs Materials: Crystal bead strands on a circular metal frame Finish options: Silver or Brass Light source: Two E12 candelabra sockets, 40W maximum each Voltage: 110-120V Installation: Hardwired; includes a 6-foot chain for height adjustment and a mounting canopy CareWipe gently with a soft, dry cloth. Do not use cleaners or abrasives of any kind.

A thick column of textured glass wraps a solid brass core in this wall sconce. The cast surface carries real depth, scattering the light while still letting it glow through, so the eye registers the glass and metal before it notices the fixture.Because each column is cast rather than pressed, the texture, thickness and play of light differ slightly from one piece to the next. Its proportions sit well in a hallway, on a bedroom or living room wall, or flanking a doorway. It looks especially good installed in pairs at even spacing.Details Materials: Cast textured glass around a solid brass core Also available: Black textured glass on stainless steel Dimensions: 50 cm (19.7") high, 18 cm (7.1") wide Weight: About 2.5 to 3.4 kg (5.5 to 7.5 lb) Bulb type: E14 (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Suggested mounting height: Center about 150 to 160 cm (59 to 63") from the floor

A tall bell of clear, hand-blown glass hangs from a slender metal frame, with a small glass sphere suspended inside it. Because the bell is fully transparent, the lamp becomes part of the design, and a warm filament bulb gives the best result.Each bell is shaped by hand, so expect variation in wall thickness, tiny bubbles and subtle differences in form from one piece to the next. At nearly two feet tall, the sconce sits well along a hallway or stair wall, beside a doorway, or flanking a mirror. It looks especially good installed in pairs.Details Dimensions: 59 cm (23.2") high, 19 cm (7.5") wide, 18 cm (7.1") deep Materials: Hand-blown clear glass bell and inner sphere, metal frame Finishes: Black stainless steel or bronze Bulb: E14 socket (E12 for North America), warm white 2700K recommended Voltage: 110 to 240V, configured for the destination Weight: Approximately 2.8 to 3.8 kg (6 to 8 lb) Installation: Hardwired wall mount, indoor use

A tall bell of clear hand-blown glass surrounds a slender solid brass frame, so the warm glow of a filament bulb stays fully on view. The upright metal structure gives the sconce a crisp architectural line, while the clear glass keeps it light and open. At the base, a small suspended glass sphere adds a quiet sculptural detail.Mounted in pairs, it frames a mirror, doorway or piece of art with real presence. It sits comfortably in modern, contemporary, industrial, art deco and transitional interiors. Because the glass is blown by hand, each shade carries slight variations of its own.Details Finish options: Brass or black (black version in stainless steel) Materials: Hand-blown clear glass, solid brass structure Dimensions: H59 × W19 × D18 cm Light output: 900 or 1200 lumens Voltage: 110V or 240V, configured for your region Installation: Hardwired Approximate weight: 2.8 to 3.8 kg Use: Indoor only

A clear glass cylinder encloses a cast steel core, and the rough, forged surface of that core becomes the whole character of the sconce. Seen through the glass, the texture shifts as light moves across it, so no two pieces look quite alike.The glass is shaped by hand, which means slight variations in wall thickness are part of the piece. It gives soft, ambient light suited to hallways, bedrooms, dining rooms and studies, where mood matters more than task lighting.Details Materials: Cast steel core with forged texture, hand-formed clear glass cylinder Finishes: Antique copper or brushed chrome (listed as Copper and Silver). Other finishes may be specified at order Dimensions: 42 cm (16.5") high, 20 cm (7.9") wide, 12 to 14 cm (4.7 to 5.5") projection from the wall Weight: Approximately 3.2 to 4 kg (7 to 9 lb) Light source: G9 lamps, warm white 2700K Installation: Hardwired wall mount, indoor use

This wall light is a broad, irregular panel of alabaster with a soft, cloud-shaped outline, supported on brass brackets. When lit from behind, the stone glows evenly and casts a gentle halo that follows its entire edge, so it reads more as luminous stone than as a conventional fixture.The panel is cut from a single large piece of alabaster, which lets the natural veining travel uninterrupted across the surface. No two are alike, and the generous size makes the pattern visible even from the far side of a room. It suits a wall where it can stand alone, such as a stair landing, a double-height living area, a spa or a hotel lobby.Details Material: single-piece natural alabaster panel on brass brackets Dimensions: approximately 90 cm (35.4") wide by 94 cm (37") high Weight: approximately 12 to 18 kg (26 to 40 lb) Light source: concealed integrated LED panel Color temperature: warm white, 2700K Dimming: available as an option Orientation: mounting is configured for the chosen hanging direction Installation: requires a reinforced wall fixing and installation by a professional Veining: unique to each stone, varies from piece to piece

A compact wall sconce in antique brass, built around a hinged front panel that flips open. The small footprint suits tight spots beside a bed, along a hallway or flanking a mirror, where a larger fixture would crowd the wall.Two candelabra bulbs sit behind the front, giving a warm glow that works well for reading lights in the bedroom or soft accent lighting in a dining room, living room, foyer or stairway. LED bulbs can be used, and the fixture is dimmable.Details Dimensions: 6 1/4" W x 4 1/2" D x 4 7/8" H Material: Metal Finish: Antique brass Lamping: 2 candelabra bulbs, 60 watts max per bulb LED: Compatible, dimmable Voltage: 110-240V Installation: Hardwired; installation by a licensed electrician is required CareWipe with a soft, damp cloth. Avoid all cleaners and abrasives, which will damage the finish.

This compact wall sconce pairs a solid brass body with a clear K9 crystal shade, cut cleanly so its smooth faces catch and scatter light. The brass finish keeps the look warm and modern, and the small footprint suits bedside walls where space is tight.A single dimmable LED gives off a warm white glow at 2700K, soft enough for reading in bed or for setting a quiet mood in a hallway, foyer or dining room.Details Dimensions: 4.5" W x 6" D x 8.75" H Materials: Solid brass and K9 crystal Finish: Brass Light source: 1 LED bulb, included Color temperature: Warm white, 2700K Dimmable: Yes Voltage: 110V to 220V available Suggested rooms: Bedroom, living room, dining room, hallway, foyer Installation: Requires installation by a licensed electrician

A compact brass wall light with a clean, considered profile, this sconce sits close to the wall at just 3.5 inches deep. It brings a soft glow to hallways, entries and bedside walls without crowding the room.Choose a warm brass finish or a deep black, and select the standard 7.9 inch height or a taller 20 inch version for walls that call for more vertical presence.Details Material: Brass Finish: Brass or black Standard size: 7.9" W x 3.5" D x 7.9" H Tall size: 7.9" W x 3.5" D x 20" H Light source: LED bulb, included Installation: Hardwired; installation by a licensed electrician is required Suggested rooms: Living room, dining room, bedroom, hallway, foyer

A compact block of natural marble set on a slim frame, this wall sconce casts light both upward and downward. Choose a round or square profile in white, black or deep green stone.It is designed first as a reading light. Mounted beside the bed at roughly shoulder height when you are sitting up, it lights the page and keeps the rest of the room soft. Installed in pairs, it also suits a corridor or the wall on each side of a mirror.Because every block is cut from real stone, the veining and tone change from one piece to the next. The green marble shows the widest variation.Details Material: Natural marble on a slim frame Stone colors: White, black or green Shapes: Round or square Dimensions: 2.6" W x 6.3" H x 3.3" D (6.5 x 16 x 8.5 cm) Weight: About 2 to 4 lb (1 to 1.8 kg) Light direction: Up and down Bulb: G4, warm white 2700K, included Voltage: 110 to 240V Installation: Hardwired wall mount

This crystal wall sconce pairs a sturdy, industrial-leaning frame with layers of heavily faceted crystal. The frame follows a concentric form, and the light sits behind the crystal so it breaks into bright, scattered reflections across the wall.It suits hotel corridors and restaurants as readily as a bedroom, living room or kitchen.Details Dimensions: 7.75" W x 9" D x 16" H Weight: 13 lbs Materials: Brass and crystal Finish options: Brass, black Light sources: 1 Bulb type: E12 Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended CareWipe the surface with a soft, dry cloth. Avoid all cleaners and abrasives, which can damage the finish. The hand-treated surface is made to hold its color without fading or dulling over time.

A single cone-shaped shade projects from a two-toned backplate, giving this sconce a clean, architectural profile on the wall. The inside of the shade is polished brass, which warms the light and bounces more of it back into the room.Choose a snow-white or matte black shade finish. It suits a bathroom, hallway or living room, and pairs well with other fixtures from the same series when you want a consistent look from room to room.Details Materials: Brass and iron Shade finish: Snow white or matte black, each with a polished brass interior Overall dimensions: 15" W x 15" D x 9.25" H Fixture diameter: 15" Canopy: 5" W x 0.75" H Weight: 4.5 lbs Cord: 10" clear PVC Light source: One E26 bulb, 40 watts max, included Installation: Hardwired; professional installation recommended Note: Not compatible with sloped or vaulted ceilings

A heavy crystal cloche sits within a slim solid brass frame, recalling the glass domes once used to protect botanical specimens. The shade is formed from a single block of crystal, cast in a custom mold, then lathe-turned, ground with wet stone and polished by hand over a period of up to 25 days. At 1 1/2 inches thick, the glass has real weight and remarkable clarity, and it catches a single warm bulb with a soft, refracted glow.Choose lacquered burnished brass, bronze or satin nickel to suit the surrounding hardware. It sits comfortably beside a bed, along a hallway or flanking a mirror in a dining room or hotel suite.Details Materials: Solid brass frame and backplate, crystal glass shade Finishes: Lacquered Burnished Brass, Bronze, Satin Nickel Overall: 7" W x 8 3/4" D x 12" H Glass shade: 7" diameter, 5" H, 1 1/2" thick Backplate: 5" diameter, 1" D Weight: 13 lbs. Light source: One E12 candelabra bulb, included, warm white 3000K by default Maximum wattage: 6.5W LED or 40W incandescent Dimmable: Yes, compatible with dimmer switches Voltage: 110V to 220V available Installation: Hardwired; assembly required and professional installation recommended Sloped ceiling compatible: Yes Use: Indoor, dry locations

A compact wall light built around a glowing crystal orb, held in a hexagonal fitting set into a flat metal frame. The geometry is crisp and architectural, drawing on an 18th-century visionary design honoring physics, recast here in a clean modern idiom.Rings of tiny integrated LEDs give the glass a soft, even warmth at 3000K, and the light is dimmable for evening use. Its modest depth suits hallways, entries and bedside walls, as well as living and dining rooms.Details Materials: Brass and glass Finishes: Lacquered Burnished Brass, Matte Black, Polished Nickel Overall dimensions: 7" W x 7" D x 5" H Backplate: 4.5" diameter Weight: 11 lbs Light source: Integrated LED rings, 4W, 480 lumens total Color temperature: Warm white, 3000K Dimmable: Yes Voltage: 110V to 220V available Installation: Hardwired; requires a licensed electrician