En stock - Listo para entregar

A column of thick black textured glass wraps a stainless steel core in this tall wall sconce. Because the glass is cast, its surface scatters the light softly while still letting it through, and each column carries its own variation in texture and glow. By day the dark glass reads as a calm, sculptural form on the wall.At 50 cm tall, it sits comfortably in a hallway, beside a bed, in a living room or flanking a doorway, and it looks especially good installed as a pair. For balanced placement, mount the center roughly 150 to 160 cm (59 to 63 in) above the floor.Details Materials: Cast textured glass in black, stainless steel core Dimensions: 50 cm (19.7 in) H x 18 cm (7.1 in) W Lamping: E14 sockets (E12 for North America), warm white 2700K recommended Installation: Hardwired wall mount, indoor use Note: Cast glass means texture and light quality vary slightly from piece to piece

A tall wall light built around molded glass domes, each one flame-polished by hand, held in a hand-finished solid steel frame. The cloche shapes give the glass a soft, rounded presence on the wall, and at just over 28 inches high the sconce has real vertical reach for hallways, stair landings and generous living rooms.Choose a brass or bronze finish for the frame, paired with clear glass for a crisp look or amber glass for a warmer glow.Details Frame: Hand-finished solid steel Shades: Molded glass domes, flame-polished by hand Finish options: Brass, Bronze Glass options: Clear, Amber Overall size: 9" W x 10" D x 28 1/4" H Backplate: 4 1/2" diameter, 1/2" H Weight: 40 lbs Voltage: 110-120V Location: Indoor use CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

This tall wall sconce pairs a shade carved by hand from a single block of solid alabaster with a brass frame. When the lamp is on, light passes through the stone and reveals its veining and soft shifts in tone. Because natural alabaster varies so widely in pattern and color, no two sconces look quite the same.The slim, vertical profile suits hallways, stair landings and either side of a mirror or bed. The frame comes in lacquered burnished brass, bronze or polished nickel.Details Overall dimensions: 6" W x 4" D x 18.5" H Backplate: 4.5" W x 18" H Weight: 22 lbs. Shade: hand-carved solid alabaster Frame: brass Finishes: lacquered burnished brass, bronze, polished nickel Bulb note: an LED bulb is strongly recommended, since heat from an incandescent bulb can damage the alabaster Dimmable: compatible with a dimmer switch Voltage: 110-120V Mounting: vertical orientation, hardwired Installation: requires a licensed electrician CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

This wall light pairs a slender metal frame with a panel of natural alabaster, a stone that glows softly when lit and shows its own veining from piece to piece. The look is clean and modern, and the light it casts is warm and even, suited to a kitchen island wall, a dining room or the space beside a bed.It comes in two heights and two finishes, so it can sit quietly in a compact room or hold its own on a taller wall.Details Materials: Metal and alabaster Finish: Brass or black Height: 23.6 in (60 cm) or 31.1 in (79 cm) Light source: LED bulbs, included Color temperature: Warm white, 2700K or 3000K Voltage: 110V to 240V available Suggested settings: Hotels, restaurants, dining rooms, bedrooms and living rooms Installation: Hardwired; installation by a licensed electrician is required

Three slabs of hand-cut calcite rise one above another in a solid brass frame, glowing in sequence up the wall. At nearly 80 cm tall, this sconce brings real vertical presence, so it holds its own on a wall where a single stone would feel like a small accent.Because every slab is cut by hand, the three stones on each fixture vary in veining and tone, and no two sconces are alike. The tall profile sits well in a hallway, along a stair, in a double-height entry or on a high bedroom wall, used on its own or as a mirrored pair.Details Materials: Hand-cut calcite, solid brass frame Finish: Gold Dimensions: 79.4 cm (31.3") H x 15.2 cm (6") W x 14 cm (5.5") D Light: Warm white, 2700K Installation: Hardwired wall mount

This sconce is a single long rod of tapered brass finished with a glowing crystal tip. Light gathers at the crystal and runs along the metal in both directions, so on the wall it reads as one clean vertical stroke. The brass is worked to catch shadow down its length instead of reflecting flatly, and the crystal is cut to scatter light where it meets the rod.At 92 cm tall with a projection of only 7 cm, it adds height to a wall while staying close to it. That makes it a natural fit for hallways, stair walls, entrances and niches. In a living room or bedroom, a pair works well framing a doorway, a mirror or a headboard.Details Materials: Brass and crystal Dimensions: 92 cm H x 11 cm W x 7 cm D (36.2 x 4.3 x 2.8 in) Weight: Approximately 2 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

A torch-style wall light with a ribbed glass hurricane that catches and scatters the glow of a single bulb. The tall, slender profile reads clean and architectural against the wall, and the solid metal body gives it a reassuring weight.Choose from four finishes. The bronze option is a living finish that deepens to a darker patina with age, most quickly where hands touch it, so each fixture develops its own character over time.Details Finishes: Brass (lacquered burnished brass), Bronze, Nickel (polished nickel), Weathered Zinc Materials: Brass, Bronze and Nickel finishes are made of brass; Weathered Zinc is made of aluminum Nickel finish: nickel plated Brass finish: lacquered to hold its color Bronze finish: live solid brass finish protected by a light coat of wax; darkens and patinas naturally over time Shade: ribbed borosilicate glass hurricane For brighter light, an LED bulb with higher lumen output is an option Compatible with dimmer switches Voltage: 110-120V Overall: 4.5" W x 6" D x 72" H Wall plate: 4.5" diameter Weight: 13 lbs Installation: hardwired; requires assembly and installation by a licensed electrician CareWipe with a soft, dry cloth. Avoid all cleaners and abrasives, which will damage the finish.

This outdoor lantern takes its cues from glass and steel architecture. Clean, linear lines form a ventilated metal frame, and the glass panels inside appear to hover within it, giving a familiar lantern shape a lighter, more modern presence.At 28 inches tall on a slim full-height backplate, it holds its own beside an entry door or along an exterior wall. Choose lacquered burnished brass for warmth or matte black for a crisper, graphic outline.Details Overall dimensions: 12"W x 10.25"D x 28"H Backplate: 7"W x 0.5"D x 28"H Weight: 35 lbs Materials: Brass and glass Finishes: Lacquered Burnished Brass or Matte Black Light source: 2 E26-base bulbs, 40W max each Dimmable: Yes Mounting: Wall mount; not suitable for vaulted ceilings Installation: Requires a licensed electrician

Woven horsehair wraps a slender brass body in this tall wall sconce, giving the metal a soft, textured contrast. Etched glass completes the composition, and the long vertical profile suits narrow walls, bedside placements and hallways where a quiet, crafted detail is welcome.Choose the body finish and the horsehair shade to suit your palette, from pale flaxen to deep jet black.Details Dimensions: 32.25" H x 5" W x 3.75" D (82 cm H x 13 cm W x 10 cm D) Backplate: 5" diameter Materials: Woven horsehair wefts, brass, etched glass Body finishes: Aged Brass, Oil-Rubbed Bronze, Blackened Brass, Tarnished Silver Horsehair colors: Flaxen, Jet Black, Palomino Light source: 1 x 3W dimmable LED bulb Color temperature: Warm white 3000K or daylight 4000K Voltage: 110V to 240V available Installation: Hardwired; professional installation recommended

A slim, tapered rod of brushed stainless steel rises from the wall and ends in a lit crystal tip. The glow begins at the crystal and runs down the length of the metal, so the sconce reads on the wall as one clean vertical line.The brushed finish catches soft shadow along the rod instead of throwing back a flat shine, and the cut crystal scatters light where it meets the steel. At 50 cm it is slender but has real presence. It works well in a hallway, at an entry, along a staircase or in a niche. Mounted as a pair on either side of a doorway, it makes the most of that vertical form.Details Materials: Brushed stainless steel with a cut crystal tip Dimensions: 50 cm H x 11 cm W x 11 cm D (19.7 x 4.3 x 4.3 in) Weight: Approximately 1.8 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount

This wall sconce pairs thick, clear crystal with an iron frame, so light passes through the glass and scatters softly across the wall. The crystal brings sparkle while the metal keeps the outline clean and composed.It works well flanking a mirror, along a hallway or beside a bed. The iron comes in a bronze or brass finish to suit warmer or deeper palettes.Details Materials: Thick clear crystal and iron Finish options: Bronze or brass Dimensions: 6.25" W x 4.75" D x 10.5" H Diameter: 4.75" Backplate: 4.75" W x 10.25" H x 0.75" D Weight: 5.7 lbs Light source: One E12 socket, 60 watts max (bulb not included) Cord: Clear PVC with copper wire, 11.75" long Installation: Hardwired, professional installation recommended; mounting hardware included CareWipe gently with a soft, dry cloth. Avoid polishes and cleaners, which can damage the finish.

A thick dome of solid crystal sits at the heart of this wall sconce, its form drawn from the glass vessels once used by nineteenth-century botanists. The shade is cast from a single block, then turned on a lathe, ground with wet stone and polished by hand until the glass reads clear and luminous. At a full one and a half inches thick, it has real weight and presence, catching and softening the light from within.The frame and round backplate are solid brass, offered in three finishes so the sconce can sit comfortably beside warm or cool metals elsewhere in a room.Details Overall: 7" W x 8 3/4" D x 12" H Glass shade: 7" diameter, 5" H, 1 1/2" thick crystal Backplate: 5" diameter, 1" D Weight: 13 lbs Materials: Hand-finished cast crystal shade; solid brass frame and backplate Finishes: Lacquered Burnished Brass, Bronze, Satin Nickel Light source: One E12 candelabra bulb, LED 6.5W max or incandescent 40W max Bulb: Included Dimmable: Compatible with a dimmer switch Voltage: 110-120V Use: Indoor, dry locations

A thick, hand-formed glass shade sits within a slim stainless steel frame, giving this compact sconce a dense, sculptural presence on the wall. Because each shade is shaped by hand, its thickness and the small marks within the glass differ slightly from one piece to the next, so no two are quite alike.The modest footprint works well where a larger fixture would feel crowded: flanking a vanity mirror, beside a bed or along a corridor. Choose the black frame for a crisp, graphic look, or brass for a warmer contrast against the glass.Details Materials: Hand-formed thick glass shade, stainless steel frame Finish options: Black or brass Height: 24 cm (9.4 in) Width: 14 cm (5.5 in) Projection from wall: 15 to 17 cm (5.9 to 6.7 in) Light: Warm white, 2700K Installation: Hardwired wall mount Placement: Suitable beside a vanity in a dry, protected spot away from direct water Finish selection: Specified before production

A thin disc of carved alabaster sits on a slender brass mount, cut fine enough that light passes through the entire face. When lit, the stone's natural veining becomes the pattern you see, so the sconce reads as much as a lit object as a light source.At 60 cm tall, it has the presence to hold a wall by itself in a living room, entry, stair landing or bedroom. Because alabaster is a natural stone, each disc carries its own color, veining and translucency, and no two will match.Details Materials: Carved natural alabaster disc, brass mount Dimensions: 60 cm (23.6") high x 30 cm (11.8") wide Light: Warm white, 2700K Installation: Hardwired wall mount; secure into a stud or use reinforced anchors Variation: Color, veining and translucency vary from disc to disc

Two semi-circles of natural alabaster sit between slender brass rods in this wall sconce, creating a curved, layered profile that reads as both architectural and organic. The stone softens the light into a warm, even glow, while the light bronze patina on the metal adds a quiet sheen against the wall.Its tall, narrow proportions suit a pair flanking a bed, a mirror or a doorway, and it sits comfortably in dining rooms, living rooms and hospitality settings such as hotels and restaurants. Because alabaster is a natural material, veining and tone vary from piece to piece.Details Dimensions: 11.75" W x 5.75" D x 23.75" H Materials: Metal (brass rods) and alabaster Finish: Light bronze patina Light source: LED, dimmable Color temperature: Warm white, 2700K or 3000K Voltage: Available in 110V to 240V Installation: Hardwired; requires installation by a licensed electrician

Layered plaster shells step down the wall in this sconce, concealing the light source so the glow spills softly outward and forms a halo on the surface behind it. The matte plaster is hand finished, which means each piece carries slight shifts in tone, both from one sconce to the next and between its own tiers.Choose one tier for a powder room or narrow passage, two for a bedside wall or entry, or three for a tall vertical line along a stairway or long corridor. At only 10 cm (3.9 in) deep, it sits close to the wall where clearance is tight.Details Material: Real plaster with a hand-applied matte finish Colors: Beige or light grey 1-Tier: 30 cm (11.8 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 1.8 to 2.2 kg (4 to 5 lb) 2-Tier: 45 cm (17.7 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 2.4 to 3 kg (5 to 7 lb) 3-Tier: 57 cm (22.4 in) high x 25 cm (9.8 in) wide x 10 cm (3.9 in) deep, approx. 3.5 to 4.2 kg (8 to 9 lb) Light source: Built-in, warm white 2700K Installation: Hardwired to a wall junction box by an electrician; use fixings suited to the fixture weight and wall construction Suggested placement: Center roughly 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only; not for bathrooms with direct moisture or outdoors

This wall sconce is built around a cascade of plated aluminum tassels. The strands catch the light from two small bulbs and scatter a soft silver shimmer across the wall. The frame is iron and the tassels are aluminum, so the fixture feels substantial without looking heavy.At 22 inches tall it carries well beside a bed, along a hallway or flanking an entry. Mount a pair for symmetry or use a single sconce as a quiet focal point.Details Dimensions: 11" W x 11" D x 22" H (28 x 28 x 56 cm) Finish: Silver Materials: Iron and aluminum Installation: Hardwired; installation by a licensed electrician is required Mounting note: Not suitable for a vaulted ceiling

A thin sheet of natural jade wraps around the light source in this compact sconce, secured by a single polished brass stud. When lit, the stone reveals soft clouding in cream and pale peach, and its edges dissolve into a gentle glow across the wall.Because the jade is cut fine enough for light to pass through, every piece carries its own pattern, color and degree of translucency. The sconce is meant for mood rather than task lighting, and it sits comfortably beside a bed, along a hallway or over a vanity. On a longer wall, a pair gives a more balanced effect than one alone.Details Material: Natural jade with a polished brass stud Dimensions: 20.7 cm (8.1") high, 15.8 cm (6.2") wide, 14 cm (5.5") deep Light: Warm white, 2700K Installation: Hardwired wall mount

A shallow bowl of travertine sits against the wall, bound with a thick wrap of natural rope. The light travels mostly upward and outward, washing the surface behind it so the room receives a soft glow while the stone shows off its pitted, organic grain.Both materials are meant to change with time. The rope is knotted in place instead of glued, and the travertine gains character as it ages. Its compact footprint suits a hallway or stair wall, and it sits comfortably in coastal, rustic or Japandi interiors where the rope feels like a natural part of the scheme.Details Materials: Travertine bowl with natural fiber rope Dimensions: 20 cm (7.9") high, 16 cm (6.3") wide, 7 cm (2.8") deep Light distribution: Primarily upward and outward onto the wall Bulb type: G9 Color temperature: Warm white, 2700K Installation: Wall mounted, hardwired

This wall sconce takes the generous glow of a classic fixture and pares it down to a clean, contemporary form. Light rises from a brass dome and passes through three mold-blown glass cylinders, which scatter and brighten it into a soft, layered radiance.At 24 inches tall, it carries real presence on a wall while keeping a slim profile, a natural fit beside a bed, along a hallway or flanking a mirror.Details Dimensions: H 24" x W 7" x D 5" Weight: 15 lbs Materials: Mold-blown glass cylinders, brass dome and armature Finishes: Aged brass, blackened brass, oil-rubbed bronze, tarnished silver Number of lights: 3 Mounting: Wall mounted

Two carved alabaster domes sit on a U-shaped arm of black stainless steel, one casting light upward along the wall and the other washing it downward. The result is a balanced, symmetrical glow rather than a single directed beam, with the dark metal framing the pale stone in a way that suits Art Deco and Hollywood Regency rooms alike.Because each dome is natural stone, its veining, color and translucency are unique, and the two shades on a single fixture will differ slightly from one another. The arm is offered in left and right versions, so two sconces can mirror each other on opposite sides of a bed, vanity or doorway. Beside a bed, a center height of roughly 150 to 160 cm (59 to 63") from the floor works well.Details Materials: Natural alabaster domes, black stainless steel arm Width: 31 cm (12.2") Height: 37.8 cm (14.9") Weight: Approximately 3.5 to 4.8 kg (8 to 11 lb) Orientation: Left or right Light source: Two E14 bulbs (E12 in North America), warm white 2700K Installation: Hardwired; can be fitted to straight or sloped walls

Two alabaster globes sit side by side on a slender brass arm, each one lit from within so the stone takes on a soft, moonlike glow and casts its own pool of light across the wall. The globes are turned from natural stone, which means the cream and honey veining shifts from one globe to the other and no two fixtures look quite alike.With a shallow projection of just under six inches, it stays comfortably clear of passing shoulders in a hallway or entry. The pair of globes offers more light and a fuller presence than a single shade, and it sits well beside a vanity mirror when mounted at face height.Details Materials: genuine alabaster globes with brass arm and backplate; veining varies naturally Dimensions: 20 cm (7.9 in) H x 15 cm (5.9 in) D Globes: two, each 10 cm (3.9 in) in diameter Backplate: 12 cm (4.7 in) Light source: two G9 bulbs, approximately 1,000 lumens total at 2700K warm white Installation: hardwired to a wall junction box by an electrician; a plug-in version may be requested where the design allows Bathroom use: suitable beside a vanity away from direct water; follow local bathroom electrical-zone rules. Not intended for outdoor use Weight: approximately 2 kg

Two orbs of natural alabaster sit along a slim vertical frame, joined by clean geometric lines that give this sconce a quiet, architectural presence. The stone softens the light as it passes through, so the glow reads gentle and even, with no hard glare.Its narrow profile suits a vanity wall, a bedside, or a hallway where space is tight. Choose antique brass for warmth or nickel for a cooler, brighter look.Details Dimensions: 5" W x 5" D x 5" H, 5" diameter Materials: Metal with natural alabaster stone Finish options: Antique Brass, Nickel Number of lights: 2 Light source: Integrated LED, 3W max, included Color temperature: Warm white 3000K (default) or daylight 4000K Dimmable: Yes Voltage: 110V-240V Power: Hardwired Installation: Some assembly needed; a licensed electrician should handle the wiring

This two-light sconce pairs a slim metal frame with panels of natural alabaster, a stone that softens light into a warm, even glow. Built from steel and brass, it comes in polished nickel, bronze plated or burnished brass, so it can sit comfortably beside cool or warm hardware.At just over 22 inches tall on a narrow backplate, it suits a bathroom mirror, a bedside wall, a hallway or an entry where a tall, quiet fixture fits better than a wide one. Because alabaster is a natural material, each stone shows its own veining and tone.Details Materials: Steel and brass with alabaster stone Finishes: Polished nickel, bronze plated, burnished brass Overall size: 4.5" W x 5.5" D x 22.25" H Backplate: 4.25" W x 8.75" H Light source: 2 x E26 bulbs, dimmable Color temperature: Warm white, 2700K Voltage: 110V to 220V available Installation: Hardwired; installation by a licensed electrician is required