Apliques de Pared

A slim folded shape in textured iron, finished in champagne bronze. Instead of shining from a single opening, the light slips out through the cut-outs between each fold, casting a soft pattern across the wall.Small and very shallow, it suits a niche, a tight hallway or a bedside in a compact room. It also works well repeated along a long passage where a larger fixture would feel crowded.Details Size: 16 cm (6.3 in) H x 6 cm (2.4 in) W x 4 cm (1.6 in) D Material: Textured iron Light source: LED, warm white 2700K Weight: About 0.8 to 1.2 kg (2 to 3 lb) Installation: Hardwired to a standard wall junction box by an electrician. Use fixings suited to the fixture and your wall construction. Placement: For general wall use, center around 152 to 168 cm (60 to 66 in) from the floor Use: Dry indoor locations only

Two thin panels of natural stone meet at an angle along a slim brass spine, forming a shallow fold on the wall. The light source sits behind the stone, so the glow washes back onto the surface around it while the panels themselves take on a soft, backlit warmth.The stone is onyx-veined, with beige and cream banding that varies from one lamp to the next. The pattern is most visible along the seam where the two panels join. Mounted against plaster, limewash or microcement, it gives a hallway, entry, living room or reading nook a gentle ambient light rather than a bright point of glare.Details Materials: Natural onyx-veined stone panels, brass spine Dimensions: 35 cm (13.8") high, 15 cm (5.9") wide, 10 cm (3.9") deep Light source: Integrated LED, warm white 2700K Light direction: Indirect, cast behind the stone panels toward the wall Installation: Hardwired wall mount Stone character: Veining and color vary naturally with each piece

A slab of alabaster sits at the heart of this wall sconce, framed by a slim metal surround that keeps the lines clean and modern. When lit, the stone's natural veining comes forward and the light softens into a gentle, even glow that suits quiet rooms and evening hours.Two shapes are offered. The round version is compact and works well flanking a mirror or bed. The taller oval reads more vertically and gives a hallway or dining wall a bit more presence.Details Shapes: Round, 7.9" diameter (20 cm); Oval, 6.5" diameter x 16.7" height (16.5 cm x 42.5 cm) Materials: Metal and alabaster Finishes: Brass or black Light source: LED bulbs, included Color temperature: Warm white, 2700K or 3000K Voltage: 110V to 240V available Suggested rooms: Bedroom, living room, dining room, bathroom, hospitality settings Installation: Hardwired; installation by a licensed electrician is required

A frosted glass globe sits above a solid marble base in this compact wall sconce. The frosting diffuses the lamp fully, so the light stays gentle even when you are standing right beside it.Because the base is natural stone, each one carries its own veining and tone. Its modest height and soft glow suit a bedside wall or a vanity, and mounting one on each side of a mirror gives even, flattering light on the face.Details Materials: natural marble base, frosted glass globe shade Height: 38 cm (15 in) Base width: 12 cm (4.7 in) Shade diameter: 12 cm (4.7 in) Light temperature options: warm white (2700K) or cool white Installation: hardwired wall mount; suited to a dry, protected spot beside a vanity Note: veining and color vary from piece to piece

A single brass leaf, forged by hand and gilded with gold leaf, rests against the wall as a quiet sculptural form. The gilding picks up light unevenly, so the surface shifts in tone and depth whether the sconce is switched on or not.Because the gold leaf is applied by hand one sheet at a time, every piece shows its own texture, seams and warmth of color. Expect yours to differ slightly from the photographs; that variation is part of the appeal.Choosing a SizeThe 240 mm size sits well in a hallway or powder room, or as a pair on either side of a doorway. The 310 mm works on a bedroom or living room wall. The 360 mm is scaled for dining rooms, entrances and stairwells, where it can be appreciated from across the room.Details Material: Hand-forged brass with hand-applied gold leaf Diameter options: 240 mm (9.4"), 310 mm (12.2"), 360 mm (14.2") Weight: Approximately 2.5 to 3.5 kg (5.5 to 7.7 lb), depending on size Light source: G9 bulbs, warm white 2700K Installation: Hardwired wall mount, indoor use

A single drop of glass, suspended against a slim metal backplate, gives this LED sconce its quiet sculptural presence. The form is soft and rounded, and the light it casts feels gentle on the wall, well suited to flanking a bathroom mirror or sitting beside a bed.Choose a finish to suit the room: warm heritage brass, matte black or satin nickel. The light color is also yours to select, with a warm white for evening comfort or a crisp cool white for task lighting.Details Dimensions: 5" W x 20.8" H Backplate depth: 5" Weight: 10 lbs. Materials: Metal and glass Finishes: Heritage Brass, Matte Black, Satin Nickel Light source: 1 LED G9-base bulb, dimmable Color temperature: Warm White 3000K or Cool White 6000K Voltage: 110V to 220V available Installation: Hardwired; installation by a licensed electrician required Suggested rooms: Bathroom, bedroom, dining room, living room, hospitality settings

A ring of glass rests against a brass backplate, lit from inside so that the halo glows and casts a gentle circle of light onto the wall around it. The effect is quiet and graphic, drawing on Art Deco geometry without feeling like a period copy.The round silhouette reads best against a plain wall. Consider it beside a bed, along a hallway, in a powder room, or mounted as a pair on each side of a framed artwork.Details Materials: Glass and brass Dimensions: 29.2 cm (11.5") high, 26 cm (10.2") wide, 15 cm (5.9") deep Weight: Approximately 1.8 to 2.2 kg (4 to 5 lb) Bulb: E14 base Color temperature: Warm white, 2700K Installation: Hardwired wall mount

When the lights are on, the faceted crystals scatter soft points of light across the wall and the room.The branches are molded from aluminum in one piece, with no welded joints. That keeps the frame rigid and the lines clean, and the polished gold finish is sealed with an anti-oxidation coating. The branches come apart for assembly, and you hang each crystal by hand. Each branch has a front side, so mount it facing up and follow the included instructions.Details Height: 10 inches Frame: One-piece aluminum branches, polished gold finish Crystals: Clear K9 crystal pendant beads Light source: 2 G9 bulbs, not included Suggested bulb: 3000K warm white, or choose a color temperature to suit the room Dimming: Dimmable with dimmable G9 bulbs and a compatible dimmer switch, not included Voltage: 110V Mounting: Wall mount, hardwired; mounting hardware included Assembly: Required; crystals hang from the branches by hand Weight: 6.61 lb Use: Indoor only, not water resistant

This wall sconce takes the form of a leafy branch, its slender gold arms hung with clear K9 crystals that catch and scatter light across the wall. Lit, the fixture reads as a small golden tree, giving a room a soft glow alongside a decorative accent.The branches are molded from aluminum alloy in a single piece, keeping the fixture light while giving the crystals solid support. Each branch detaches for assembly, and the crystals hang directly from them. Note that the branches have a front side, which should face up during installation.Details Height: 17.7 in Materials: Aluminum alloy branches, K9 clear crystal Finish: Polished gold Light source: 2 x G9 bulbs, not included; 3000K warm white recommended Dimmable: Yes, with dimmable bulbs and a compatible dimmer switch Voltage: 110V Mounting: Wall mount, mounting hardware included Assembly: Required; branches attach individually and crystals are hung by hand Weight: 6.61 lb Use: Indoor only

This wall sconce pairs a gold finish with clear K9 crystals and a frosted glass shade, giving a soft, diffused glow rather than a harsh point of light. At 18 inches tall, it has enough presence to anchor a stretch of wall beside a bed, along a hallway or flanking a mirror.The design sits comfortably with both traditional and modern interiors. It suits bedrooms, living and dining rooms, entryways and hotel corridors alike. It runs on a single E12 LED bulb, which is included.Details Dimensions: 12" W x 18" H Materials: Stainless steel and K9 crystals with a frosted glass shade Finish: Gold Light source: 1 x E12 LED bulb, included Voltage: Available in 110V to 240V Installation: Hardwired; professional installation recommended

This wall sconce pairs sculpted gold leaf forms in metal with a fine chain accented by small metal butterflies. The effect is light and organic, a modern fixture with a quiet nod to the garden.It suits a bedroom wall beside the bed, a living room, a foyer or a hotel corridor. It comes in two sizes, and the larger version makes a generous feature on a tall wall.Details Small: 12.6" W x 23.6" H Large: 23.6" W x 47.2" H Material: Metal Finish: Gold Light source: G9 bulbs, included Voltage: 110V to 240V Installation: Hardwired

A frosted glass globe rests at the heart of a ceramic backplate finished in a warm golden glaze. The plate has an irregular, asymmetric outline, which gives the sconce its character on the wall, while the matte globe diffuses the light into a gentle glow.Because each backplate is formed and glazed by hand, its shape and the depth of the metallic sheen differ slightly from one piece to the next. With 14 cm of projection, the sconce casts a soft halo onto the wall around it, a quality that suits bedrooms, hallways, dining rooms and boutique interiors.Details Materials: Hand-shaped ceramic backplate with golden metallic glaze, matte glass globe Dimensions: 30 cm (11.8") high, 26 cm (10.2") wide, 14 cm (5.5") projection from the wall Light: Warm white, 2700K Installation: Hardwired wall mount

This gooseneck sconce brings a soft, vintage character to the wall. Paneled cream glass filters the light into a warm, diffused glow, while an antique brass finish with cast twist or knot detailing gives the piece the feel of something passed down through generations.It sits comfortably beside a bed or along a hallway, adding a quiet, old-world note to a modern room.Details Materials: Steel with antique brass finish, paneled cream glass shade Dimensions: 8.5" W x 5.9" D x 8.54" H, 5.9" diameter Bulb type: E12 base Hardware: Hanging hardware included Installation: Requires installation by a licensed electrician

A half-cylinder of genuine alabaster forms the body of this wall sconce, finished with simple half-sphere accents. The stone's natural veining comes through when lit, and the shape spreads a soft glow above and below the fixture along with gentle ambient light.The slim profile sits close to the wall, which makes it a good fit for bathrooms, powder rooms, hallways and bedrooms. It also works well in living rooms, dining rooms, entryways and hotel corridors.Details Overall size: 4" D x 9.5" H Bowl width: 8" Materials: Metal and alabaster Finish: Alabaster Light source: 1 bulb Light color: Warm white, 3000K Voltage: 110V to 220V available Installation: Requires a licensed electrician. Not suitable for vaulted ceilings.

A carved half-moon of alabaster rests against a bronze mount in this wall sconce. The flat face sends light both upward and downward across the wall, while the curved stone glows softly on its own.Because alabaster is a natural stone, the veining and translucency vary from piece to piece, and the broad half-moon shape shows off a long stretch of that pattern. Its proportions sit well on a living room, bedroom or entry wall, and the shallow profile keeps it practical in a hallway.Details Materials: Carved natural alabaster with a bronze mount Dimensions: 20" H x 12" L x 4" D (50.8 x 30.5 x 10.2 cm) Light: Warm white, 2700K Installation: Hardwired wall mount Note: Each piece is unique, with natural variation in veining and translucency

A clear glass cylinder sits inside a frame of textured brass, and because the glass is fully transparent, the hammered surface of the metal stays in view. The sconce carries visual interest whether it is lit or not. The brass is hand-worked, so the texture lands a little differently on each piece, and the finish will deepen gradually over the years.At 54 cm tall, it has a strong vertical presence that suits a hallway, a stair wall or a dining room. Hung in pairs on either side of a doorway, it frames the opening nicely. A typical center height is about 60 to 66 in (152 to 168 cm) from the floor.Details Materials: Textured brass and clear glass; the hand-worked texture varies slightly from piece to piece Dimensions: 54 cm (21.26 in) H x 15 cm (5.91 in) W x 11 cm (4.33 in) D Wall projection: 11 cm (4.33 in) Weight: Approximately 1.8 to 2.6 kg Light source: Integrated LED, warm white 2700K Installation: Hardwired to a wall junction box; installation by a qualified electrician Use: Dry indoor locations only; not for outdoor use

A curved petal of solid copper, hammered by hand, cradles an opal glass globe in this compact wall sconce. Each strike of the hammer leaves a small facet that picks up the light, so no two pieces look quite alike, while the opal glass spreads a soft, even glow across the wall.The copper is left to age naturally, darkening and gaining depth over the years instead of staying bright. At under nine inches tall, it sits comfortably beside a bed, along a hallway, on a dining room wall or in a powder room. Hung in pairs, the sconces read as a matched set of sculptural objects.Details Materials: Hand-hammered solid copper with an opal glass globe Dimensions: 20 cm (7.9") wide, 22 cm (8.7") high, 10 cm (3.9") deep Light: Warm white, 2700K Installation: Hardwired wall mount

A gold metal disc with a hand-worked surface, lit from behind so a soft halo spreads across the wall around its edge. With the light off, it looks more like a hammered plate hung on the wall than a fixture.Because the texture is formed in the metal itself, light plays differently across each disc and even across a single face, giving every piece its own character. It sits well in a hallway, bedroom, living room or along a stair wall, and hanging two or more in a line makes the glow read more strongly than one alone.Details Material: Textured metal Finish: Gold, with other finishes available to specify before production Diameter: 28 cm (11 in) Light: Backlit halo effect, warm white 2700K Mounting: Wall mount, hardwired

Two blackened iron cups, each with a hammered surface, sit on a slender brass rod set against a walnut backplate. Because the cups are shaped individually, the facets scatter light in their own way on every sconce, and the walnut grain and brass rod show natural variation from one piece to the next.A small pull chain at the fixture lets you turn it on and off without a wall switch, which suits a bedside, a reading corner, a guest room or a hallway. Mounted as a pair on either side of a bed, it gives focused reading light while the rest of the room stays dim.Details Materials: walnut, iron and brass Finish: hammered blackened iron cups, brass rod, walnut backplate Dimensions: 50.5 cm (19.9 in) H × 19.7 cm (7.8 in) W × 12 to 14 cm (4.7 to 5.5 in) D Weight: approximately 2.8 to 4.2 kg (6 to 9 lb) Light source: two E14 sockets (E12 in North America), warm white 2700K Switching: pull chain on the fixture Dimming: a dimmable version is offered; pair it with dimmable bulbs and a separate compatible dimmer Installation: hardwired to a wall junction box by a licensed electrician; choose anchors and fasteners suited to the sconce's weight and your wall type Use: indoors in dry areas only Placement tip: beside a bed, set the center roughly 140 to 152 cm (55 to 60 in) above the floor so the chain is easy to reach and the light sits under seated eye level

This wall sconce pairs mid-century lines with refined detailing, built around a hand-blown glass shade that softens and spreads the light. An iron frame in an antiqued finish of brass or nickel gives the glass a quiet, warm setting.Two heights are available. The 12" version suits a bathroom mirror or a narrow hallway, and the 24" version brings more presence beside a bed or along a longer wall.Details Materials: Hand-blown glass and iron Finish options: Antiqued brass or antiqued nickel 12" size: 10.25" W x 5.5" D x 12" H, 5.5" diameter, 5 lbs 24" size: 10.25" W x 5.5" D x 23.75" H, 5.9 lbs Sockets: 1 per fixture Cord: Clear PVC, 12" long Installation: Hardwired, professional installation recommended Mounting hardware: Included CareWipe gently with a soft, dry cloth. Avoid polishes and cleaners, which can damage the finish.

A solid block of alabaster, faceted by hand across every visible surface, sits flush against the wall with no shade or exposed fittings. When lit, the stone itself glows, and its natural veining becomes the pattern you see on the wall.Because each block is quarried stone, the color, veining and translucency vary from piece to piece, so no two lamps look quite alike. The smaller size works well beside a vanity, in a powder room or repeated along a hallway. The larger size has the presence to hold a bedroom wall, flank a fireplace or greet guests at an entrance, where it reads as much as sculpture as lighting.Details Material: Natural alabaster, hand-faceted Small: 30 cm (11.8") high, approx. 6 kg (13 lb) Large: 45 cm (17.7") high, approx. 9 kg (20 lb) Width: 15 cm (5.9") Depth: 10 to 12 cm (3.9 to 4.7") Light: Warm white, 2700K Installation: Hardwired; mount into a stud or use reinforced anchors to carry the weight

A hand-formed crystal glass shade sits on a slim brass arm in this compact wall sconce. Because the glass is shaped by hand, no two shades share quite the same outline or thickness, and the light passing through carries the gentle irregularity that only handmade glass gives. Its organic form throws light outward across the wall instead of pooling it below.At 19.2 cm tall, it is well scaled for a bedside, beside a vanity mirror in a dry spot, along a hallway or inside a niche. It looks its best installed as a pair or in a short row. Note that its 21 cm reach from the wall is greater than its height, so allow for that projection when planning placement.Details Materials: Hand-formed crystal glass and brass Dimensions: 19.2 cm (7.6 in) H x 21 cm (8.3 in) D Backplate: 12 cm (4.7 in) Weight: Approximately 1.5 to 2.5 kg Light source: G9 bulb, warm white 2700K Installation: Hardwired wall mount Use: Dry indoor locations only

This wall sconce is built from solid iron, hammered by hand into slender linear forms that catch and scatter light across their textured surfaces. A hand-applied dark antique gold varnish gives the metal a warm, softly burnished glow with a clear nod to midcentury design.Its open, sculptural silhouette works well flanking a bed, lining a hallway or adding warmth to a reading corner.Details Dimensions: 12" W x 7" D x 20" H Backplate: 4" W x 8.75" H Material: Hand-hammered solid iron Finish: Hand-applied dark antique gold varnish Light source: One E12 bulb, 40 watts maximum Cord: PVC, 7.75" long Installation: Hardwired; professional installation recommended Mounting hardware: Included Use: Indoors, in dry locations away from moisture and water

A small pendant of alabaster hangs from a brass arm on this wall sconce, its stone veined with a snowflake-like pattern that glows softly once the light is on. Because alabaster is a natural material, the veining differs from piece to piece, so the sconce you receive will have its own markings.A single dimmable LED gives a warm 3000K light that suits bedrooms, hallways and entries where you want gentle illumination rather than a bright beam. The brass frame comes in brass, black or polished nickel to sit comfortably alongside your existing hardware.Details Materials: Brass and natural alabaster Frame finish options: Brass, black, polished nickel Overall dimensions: 4" W x 6.3" D x 10.2" H Canopy: 4.7" diameter Light source: 1 LED, dimmable Color temperature: Warm white, 3000K Voltage: 110V to 220V available Use: Indoor only Installation: Hardwired; installation by a licensed electrician is required. Not suitable for vaulted surfaces. Note: Alabaster pattern varies naturally and may differ from images shown